is ASME Asks for material certificates for nozzle materials.
20 views
Skip to first unread message
Mahesh Mirje
Sep 5, 2015, 10:03:14 AM9/5/15
to Materials & Welding
Dear experts,
Can any one explain,
Is ASME asks for materials certificates of nozzle flanges and connecting pipe, or is only marking is sufficient to identify the material.
Please explain with code reference.
Regards
Mahesh
Can any one explain,
Is ASME asks for materials certificates of nozzle flanges and connecting pipe, or is only marking is sufficient to identify the material.
Please explain with code reference.
Regards
Mahesh
S.Mohammed
Sep 6, 2015, 1:30:15 AM9/6/15
to Materials & Welding
Pl read what ur quality manual and procedures says about it.
Asme manual and proxedure req AI approval as well.
Asme manual and proxedure req AI approval as well.
Mahesh Mirje
Sep 6, 2015, 3:11:22 AM9/6/15
to Materials & Welding
Hello ,
obviously our quality manual and procedures Don't allow us to go out oF it, but Quality manuals are manufacturer property and it can be revised with proper system, but my concern is whether code accept such material with proper marking can be considered as part manufacturer certification.
Regards
Mahesh
obviously our quality manual and procedures Don't allow us to go out oF it, but Quality manuals are manufacturer property and it can be revised with proper system, but my concern is whether code accept such material with proper marking can be considered as part manufacturer certification.
Regards
Mahesh
george....@gr.bureauveritas.com
Sep 6, 2015, 9:58:06 AM9/6/15
to Mahesh Mirje
unless specifically required Sections I and VIII-1 do not require MTRs for pipe material. I don't remember for VIII-2 and 3.
Sent from my BlackBerry 10 smartphone.
| From: Mahesh Mirje Sent: Κυριακή, 6 Σεπτεμβρίου 2015 - 10:11 To: Materials & Welding Reply To: material...@googlegroups.com Subject: [MW:23405] is ASME Asks for material certificates for nozzle materials. |
Hello , obviously our quality manual and procedures Don't allow us to go out oF it, but Quality manuals are manufacturer property and it can be revised with proper system, but my concern is whether code accept such material with proper marking can be considered as part manufacturer certification. Regards Mahesh -- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com. To post to this group, send email to material...@googlegroups.com. Visit this group at http://groups.google.com/group/materials-welding. To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6601d259-46ce-4844-8704-cbcf92edff9a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Reply all
Reply to author
Forward
0 new messages