| 8:00 |
REGISTRATION OPEN |
| 9:00 |
Applications of Reactive Flow Modeling in the Oil & Gas Industry
Ellen Meeks, Ph.D. - ANSYS, Inc. |
| 9:40 |
Use of CFD for Design and Research of Operating Conditions at Marlim Field
Carlos Alberto Capela Moraes, Dr. - PETROBRAS |
| 10:20 |
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION |
| 11:00 |
Numerical Analysis of Dense Phase Gas-Solid Flows (Modelling and Applications)
Yutaka Tsuji, Dr. - Osaka University |
| 11:30 |
PVT Module Coupled with ANSYS CFD – Case Studies
Humberto Hinojosa, Ph.D. - GRUPO SSC |
| 12:10 |
LUNCH |
| Sala |
|
| 13:40 |
ANSYS-CFD Applied to the Oil Industry in Mexico
Luis Fernando López Cisneros - PEMEX-PEP |
CFD Code Validation via Ultra-reduced Model Testing in LOC - COPPE / UFRJ
Antonio Carlos Fernandes - COPPE / UFRJ |
|
| 14:10 |
Atomizers Simulation: A Model Validation for Industrial Cases
Rodrigo Bernardo Medeiros - PETROBRAS / ESSS |
CFD Modeling of the Effect of Wall Proximity on Vortex Shedding
Érico Almeida Santos - PETROBRAS |
|
| 14:30 |
Numerical Evaluation of a Gas Liquid Axial Cyclone Separator
Luis Daniel Perez Guerra - PDVSA INTEVEP |
Ultrasonic Flow Meter: How Line Dimensions Can Impact Quality of Measurement
Amanda Briggs - PETROBRAS / ESSS |
|
| 14:50 |
Lifecycle Management: Increasing IT Productivity and Efficiency
Alaor Neto - Planus |
Derfel Methodology for Detectors Allocation in Industrial Areas
Igor Ribeiro de Souza - Safe Solutions Engenharia |
|
| 15:10 |
A CFD Methodology for Modelling the Cool Down Process in a 3-Phase Subsea Separator Tank
Patrick Farias - FMC Technologies |
High Performance Computing for Oil and Gas Industry
Paul Holzhauer - NVIDIA |
|
| 15:30 |
Numerical Simulation of a Plate Heat Exchanger
Leticia Rezende Tapajoz - PETROBRAS / ESSS |
Simulation of the Dissociation of a Hydrate Plug in Horizontal Lines
Leandro Saraiva Valim - PETROBRAS |
|
| 15:50 |
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION |
| 16:20 |
Comparison Between Single and Coupled Cyclone Simulations, Evaluating the Influence of the Nonuniformity Velocity Profile at Inlet.
Rodrigo Bernardo Medeiros - PETROBRAS / ESSS |
Mass Transfer in Multicomponent Gas-Liquid Flow in a Microdevice
Cíntia Soares - PETROBRAS / (UFSC) |
|
| 16:40 |
Hardware Solutions for Oil and Gas Industry
Edson Almeida - Lenovo |
A numerical Study and Analysis of the Reactive Flow of a Microturbine Combustor with a Rotating Casing
Diogo Dantas Ribeiro - PETROBRAS |
|
| 17:00 |
Improving the Efficiency of Oil Desalters Through Variations in Geometric Parameters
Guilherme Pimentel - PETROBRAS |
CFD Modeling of the Combustion Gases of a Ground Flare and the Dispersion of Pollutants Generated
Paulo Roberto Pagot - PETROBRAS |
|
| 17:20 |
Optimization of a Cross-Flow Heat Exchanger
Brayan Marcelo Paredes - ESSS |
Nitrogen Oxides Selective Non Catalytic Reduction (SNCR) in Industrial Furnaces Regarding Back Mixing Effect
Fernando César Lopes de Oliveira - PETROBRAS |
|
| 17:40 |
CFD Simulation of Non-Newtonian Flow Inside a Mixing Tank
Maribel Valverde Ramirez - UFSCAR |
CFD Study of a Higher Stack Displacement than Expected by Design
Ana Paula da Silva Faria - ESSS |
|
| 18:00 |
CFD investigation on the Influence of Turbulence Models for Gas-Solid Flow in a Circulant Fluidized Bed
José Luis Gomez Vergel - UNICAMP |
|
|
| 18:20 |
CLOSING SESSION |
