Windows 10 Install To Usb Drive

[Jule Watkinson]

Thistopic covers how to manually create a Windows installation flash drive from Windows installation ISO disc image file or DVD, and is intended for manufacturers looking into creating media that they can use to manufacture Windows devices.

The steps described on this page assume you have Windows installation media and access to a Windows technician PC. If you're looking for an easy, automated way to create a bootable Windows installation flash drive, see:

So, I have a Inspiron 7306 laptop. All was working great, but I wanted to give it to a family member. I tried to do a fresh Windows install within Windows. It didn't appear to work and instead loads Windows & brings me back to the login screen. However, it is now not accepting my password. At this point, my only option seems to do a fresh install from a USB drive.

I created the media on a USB drive from the Microsoft website. When I boot my Inspiron into the USB drive and start to go through the Windows installation setup, I am getting the following screen (below) telling me "it couldn't find any drives" for the Windows installation.

OK, any idea how to fix this so it shows up and I can continue to do a fresh Windows install? Do I need to use another method for installing Windows? Should I download a different version to my USB stick? Just wondering how to continue with the install

This page at easeus describes how to change a disk from GPT to MBR. It also has a link to Partition Manager which is used to perform that function. AOMEI Partition Assistant here can also be used for that purpose.

Insert in your target system your Dell Recovery USB key. Power up and immediately press F12 to show BIOS boot menu. Select under UEFI Boot: the UEFI: Dell Recovery USB selection. Follow the Dell Recovery USB process.

So, I have FINALLY gotten back to troubleshooting this issue. While I am able to create and boot up in the USB drive (containing Windows media), I am still running into problems. As stated before, no drives are showing up for a location to install Windows.

I tried the suggestion from the previous post where it basically tells me to obtain the storage driver for my laptop. I was able to do this and as stated & extract it to a USB drive. Here is where I got the storage driver for my model (2nd one on the list)

Well, after a few hrs and the help of Youtube, I was FINALLY able to figure this out. Basically, it required me to obtain the right storage driver from Intel's site. Here is where I got the right driver:

Since this laptop has an Intel, I downloaded the 3rd file. After downloading the file, I unzipped it to a USB drive. When needed, I then browsed for it. Once the correct driver was loaded, I was then able to see the drive and all the partitions as needed.

One other note though. All my partitions were initially locked with Bitlocker. In order to proceed, I had to delete all the partitions and all worked great. I was able to continue with the Windows install. Since I was doing a total fresh reinstall, I didn't require any data from the laptop, but if you need to obtain data, you will have to find some way to turn bitlocker off outside of the Windows environment.

They were both the same size drive but one was a nvme drive and they other was a HDD. Now I had no way to tell which drive was which and I was wondering besides physically removing the X drive from the system how do I tell which drive to install the OS on.

OK, figured this out. After going to back into the windows installer and trying to load the drivers for my ssd I noticed that my c drive is actually showing up as the d drive in the windows install and the c drive was showing as a system reserved/recovery drive. A little random...

A method to install the traditional Windows port to drive D: is needed, for the portable Windows version does not create shortcuts in the Start screen for each app, nor does it name the shortcut it does create as Libre Office.

So i recently bought my dad new PC parts and today we finally had the time to start the installation of Windows 11. Everything was fine till the point where we had to decide on which Drive we wanted to install Win11 and the Setup showing that no drives were detected.

The only drive currently installed is a NVMe one (for safety and ease of install) which to work needs a fitting driver - Intel RST, but here is were the problems gets even worse, as we bought a brand new 14th gen CPU and Intel RST currently has no version for 14th gen CPUs (at least i didnt find one).

Secondly, NVMe requires that you use UEFI boot; you cannot use Legacy. Make sure you boot the Windows installer in UEFI mode and, during the Windows installation, make sure that you delete all existing partitions on the System drive (to ensure GPT partition table written to drive).

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

Your BIOS is set to RAID and not AHCI, if true, you need to install the RAID drivers at the install prompt otherwise they wont be seen, either disable RAID and use ACHI or press F6 and give it the drivers it needs. This is done in 3 stages, load driver 1, then 2, then 3 and your system should then show the devices

Weirdly, I also have a Dell running windows 10, chose not to share information, and my install stopped at 18%. Going to try your advice of agreeing to share and see what happens. That is pretty shady if that is something automatic.

Oh Hell what a mess. So here is my plan. The drive appears to be fully functional, it is just this software install which does not work?? If that is the true, Go here: -en.wd.com/app/products/product-detail/p/119#WD_downloads and download the Utilities, Security and Acronis (Backup) software. Install these and call it a day. If this fails I will be back to let you know.

Windows 11-After watching 18% for 10 min, I opened the task manager and ended the application in Processes and Apps completely. I went back to download it and was successful. It took less than a minute. If it stalls at 18%, delete and download again. Worked for me.

Ok SOLVED! You literally need to think outside the box. I experienced everything as you all were. It took me maybe an hour to figure this out. Drag the WD software off the storage to downloads or where ever you like to put your software and extract it from there. It completely installed and worked perfectly, synced all my drives and the WD is completely loaded and I can see the 100% space on it. I hope this helps you all. Also I am using Windows 11.

Screenshot 2023-08-12 161655409693 99.9 KB

I'm running into a frustrating issue where I need to create a Windows 10 bootable USB for my Macbook Pro 2023, but every attempt to use Boot Camp Assistant has ended in errors. This has left me in a bit of a bind, as I'm keen to find an alternative method that bypasses Boot Camp altogether. The goal is to successfully prepare a USB drive with Windows 10 installation files, which I plan to use on a PC. If anyone knows how to do this directly on macOS, avoiding Boot Camp issues, I'd really appreciate a simplified guide or tool suggestions to get this done.

There are many ways and tools can be used to make Windows 10 bootable USB installer on Mac, like rufus, WonderISO or Unetbootin. But for me, I used to installed windows 10 in a VM (vmware i think is what I used) on Mac and then created the USB drive from there. I wish that you had known about this method.

Bootcamp assistant app is removed from Apple Silicon on Mac so you can't create Windows 10 bootable USB on Mac with Bootcamp app. I am using WonderISO on my Apple Silicon Mac running the latest macOS Sonoma and it only takes 3 clicks to create a Windows 10 bootable USB on my Mac.

Parallels Desktop, a popular virtualization software for Mac, allows you to run Windows and other operating systems within macOS without needing to reboot. So you can create Windows 10 bootable USB on Mac in a Windows virtual machine.

Firstly, you need to have a copy of the Windows 10 ISO file. Microsoft provides this file for free on their website, intended for users who need to install or reinstall Windows. Download this file to your Mac before proceeding to the next steps.

With the Windows 10 ISO file downloaded, the next crucial step is to obtain a USB drive with sufficient storage space. Typically, a drive with at least 8GB of space is recommended. This ensures that there is enough room for the Windows installation files and any additional updates or drivers you might need to include in the bootable media.

Once Parallels Desktop is installed, you can use it to create a new virtual machine using the Windows 10 ISO file. During the setup process, Parallels will ask where you want to install Windows. At this stage, instead of installing it on a virtual disk, you'll choose your USB drive as the installation destination. This process effectively turns your USB drive into bootable Windows 10 installation media.

However, it's important to note that directly creating Windows 10 bootable USB on Mac through Parallels Desktop might not be as straightforward as using dedicated software for making bootable drives. It takes more time and storage space on your Mac.

3a8082e126