started my mods

[brw_racing]

I have most my parts printed for my prusa mod's. The MG Prusa needs nothing i only do this because i can and its fun.

I noticed at high X axis speed the frame would vibrate and shake hard. I had printed the cross brace bar clamps but it just did not help as much as i would have expected so i did it my own way by adding another set of vertexes and frame cross braces It has really stiffened up the sideways shaking a bunch. It also gave me a handy place to hang the spools on either side. It will have two spools hanging when i finish the dual remote exstruder mod tonight.
The plywood heatbed i machined out so the pcb and adjustment bolts are flush with the top. I am waiting for a bunch of magnets to arrive so i can embed them into the plywood under the pcb and it will stick down a piece of sheetmetal to hold the pcb down flat without the screws. The whole top should end up perfectly smooth flat and with nothing sticking up out of the bed once im done.

Sorry about deleting this post so many times..... errr trying to add the pictures
http://s180.photobucket.com/albums/x111/brw_racing/?action=view&current=IMAG0082.jpg
http://s180.photobucket.com/albums/x111/brw_racing/?action=view&current=IMAG0083.jpg