Need help uploading configuration.h settings to Arduino

[Bill]

How do I go about it?

[Rick Pollack]

Bill - you need to install the arduino IDE and then upload the firmware to your mega 2560.

Rick

[Bill]

I did again just five minutes ago.

When I go to sketch, add file and click on configuration.h then I hit
the upload button and I get compile errors
" core.a(main.cpp.o): In function 'main':
C:\Makergear\arduino-0022\hardware\arduino\cores\arduino/main
.cpp:7: undefined reference to 'setup'
C:\Makergear\arduino-0022\hardware\arduino\cores\arduino/main
.cpp:10:undefined reference to 'loop' "

On Jul 10, 3:40 pm, Rick Pollack <r...@makergear.com> wrote:
> Bill - you need to install the arduino

> IDE<http://www.arduino.cc/en/Main/Software>and then upload the

> firmware to your mega 2560.
>
> Rick
>
>
>

> On Sun, Jul 10, 2011 at 6:18 PM, Bill <billelvab...@cox.net> wrote:
> >  How do I go about it?- Hide quoted text -
>
> - Show quoted text -

[claudio donndelinger]

You make the changes in configuration.h, and select the *.pde file to upload to the board in the Arduino IDE.

CD

[Jay Couture]

Also make sure you have the right board selected.

Tools->Board-> Arduino Mega 2560

-Jay

[Bill]

Thanks guys, I can now do some serious calibration. It works.

On Jul 10, 9:27 pm, Jay Couture <jay.cout...@gmail.com> wrote:
> Also make sure you have the right board selected.
> Tools->Board-> Arduino Mega 2560
>
> -Jay
>
> On Sun, Jul 10, 2011 at 7:50 PM, claudio donndelinger

> <orias3...@gmail.com>wrote:

>
>
>
> > You make the changes in configuration.h, and select the *.pde file to
> > upload to the board in the Arduino IDE.
>
> > CD
>

> > On Sun, Jul 10, 2011 at 6:30 PM, Bill <billelvab...@cox.net> wrote:
>
> >>  I did again just five minutes ago.
>
> >>  When I go to sketch, add file and click on configuration.h then I hit
> >> the upload button and I get compile errors
> >> " core.a(main.cpp.o): In function 'main':
> >> C:\Makergear\arduino-0022\hardware\arduino\cores\arduino/main
> >> .cpp:7: undefined reference to 'setup'
> >> C:\Makergear\arduino-0022\hardware\arduino\cores\arduino/main
> >> .cpp:10:undefined reference to 'loop'  "
>
> >> On Jul 10, 3:40 pm, Rick Pollack <r...@makergear.com> wrote:
> >> > Bill - you need to install the arduino
> >> > IDE<http://www.arduino.cc/en/Main/Software>and then upload the
> >> > firmware to your mega 2560.
>
> >> > Rick
>
> >> > On Sun, Jul 10, 2011 at 6:18 PM, Bill <billelvab...@cox.net> wrote:
> >> > >  How do I go about it?- Hide quoted text -
>

> >> > - Show quoted text -- Hide quoted text -