ReplicatorG Hanging Question

[Steve]

When generating G-Code to be saved to a file (clicking the 4th button from the left on the top of the window) it seems 

that ReplicatorG 0039 is hanging up after generating the G-Code file, and the tool path window. As I watch the progress window 

it goes through all the layers, then actually writes the G-Code file, (I checked, it is there and looks good) then after that

it hangs while saying 'Generating Tool Path for Bracelet'.

The part is a simple bracelet and the STL file was run through Netfab to clean up any errors. The G-Code file actually

gets generated, and includes the start and end G-Code files.

I tried a second part which is basically a rectangle with only eleven layers. The same thing happens. G-Code is generated,

which looks good. The window showing tool path layers comes up, and I went through each one of them and they look ok.

But after saving the G-Code file, and making the tool path window, ReplicatorG hangs with the progress bar window saying

'Generating Tool Path for...'. The spinning circle indicating waiting never quits.

I am running on a fully updated iMac with OS X 10.7.5 and using ReplicatorG 0039 which then calls Skeinforge (50)

Any ideas on what I am doing wrong or things to try?

Thanks,

Steve

[Steve]

Upgrading from ReplicatorG 0039 to ReplicatorG 0040 solves the problem. 

 .