MAINSAR

1–30 of 1130

This is the user group for Multiple Acquisition InSAR software. This includes StaMPS (Stanford Method for Persistent Scatterers) and StaMPS/MTI (Multi-Temporal InSAR, including small baseline methods and a combined time series method).

Download from: https://github.com/dbekaert/StaMPS

Only members of this group can post to the group. Members' email addresses are visible only to group moderators and will not be distributed further.

0 selected

boudhane...@gmail.com, Hari Shankar2

Mar 9

make_single_reference_stack_isce error

Run the command as - make_single_reference_stack_isce input_file And you need to create a input_file

unread,

make_single_reference_stack_isce error

Run the command as - make_single_reference_stack_isce input_file And you need to create a input_file

Mar 9

Eugenia Giorgini

Mar 6

Dear all, I'm processing a stack of 125 Sentinel-1 acquisition using the SNAP-StaMPS workflow.

unread,

Dear all, I'm processing a stack of 125 Sentinel-1 acquisition using the SNAP-StaMPS workflow.

Mar 6

崇佑王, 洪顺英2

12/30/22

ERROR in psclonlat, pscphase

I also meet this question. I think there are some bugs in the psclonlat and pscdem. I have tried the

unread,

ERROR in psclonlat, pscphase

I also meet this question. I think there are some bugs in the psclonlat and pscdem. I have tried the

12/30/22

jose.valver...@una.cr, sournamalya saravanan2

11/22/22

Velocity of reference point, PSI

Hello there You can set your required velocity Hope got ur answer Regards Sournamalya Saravanan On

unread,

Velocity of reference point, PSI

Hello there You can set your required velocity Hope got ur answer Regards Sournamalya Saravanan On

11/22/22

Matt, … Raj Sunil Kandregula5

11/22/22

ps_load_initial_isce.m

Hello, When i run the stamps process (1,1) it is throwing me an error. Any help would be greatly

unread,

ps_load_initial_isce.m

Hello, When i run the stamps process (1,1) it is throwing me an error. Any help would be greatly

11/22/22

崇佑王, … Caleb Kelly5

11/21/22

Re: how to use the make_single_master_stack_isce

Hello, I ran into this problem today. Posting what helped for my future self. This problem occurs

unread,

Re: how to use the make_single_master_stack_isce

Hello, I ran into this problem today. Posting what helped for my future self. This problem occurs

11/21/22

ma1...@bristol.ac.uk, … Minxuan Feng6

4/24/22

Gamma Pre-processing

Hi Cristina Have you solve the problem? I have the same error with you . How do you deal with it? On

unread,

Gamma Pre-processing

Hi Cristina Have you solve the problem? I have the same error with you . How do you deal with it? On

4/24/22

jose.valver...@una.cr, Suri Babu2

4/6/22

error step 1,1: index exceeds the number of array elements

Try to follow the below link. If it won't work please let me know. https://forum.step.esa.int/t/

unread,

error step 1,1: index exceeds the number of array elements

Try to follow the below link. If it won't work please let me know. https://forum.step.esa.int/t/

4/6/22

3/30/22

Error PS_EST_GAMMA_QUICK Error using : n_trial_warps

I thank if somebody can help me with the following errors when running PS_EST_GAMMA_QUICK I run

unread,

Error PS_EST_GAMMA_QUICK Error using : n_trial_warps

I thank if somebody can help me with the following errors when running PS_EST_GAMMA_QUICK I run

3/30/22

peyman heidarian2

3/6/22

Problem in presenting ts velocity, Array indices must be positive integers or logical values..

Dear all, After a long search and studying the previous discussions (such as https://groups.google.

unread,

Problem in presenting ts velocity, Array indices must be positive integers or logical values..

Dear all, After a long search and studying the previous discussions (such as https://groups.google.

3/6/22

fırat altıntaş, … peyman heidarian28

3/5/22

Choosing a reference point in PSI application in StaMPS_4.1-beta

Hi Stoorm, How did you solve the issue? what was the solution? Could you please let me know. On

unread,

Choosing a reference point in PSI application in StaMPS_4.1-beta

Hi Stoorm, How did you solve the issue? what was the solution? Could you please let me know. On

3/5/22

2/17/22

Where are located the major parameters to export?: coherence, velocity...

Dear all, I tried to export the StaMPS results to a .csv file, but I didn't was successful in

unread,

Where are located the major parameters to export?: coherence, velocity...

Dear all, I tried to export the StaMPS results to a .csv file, but I didn't was successful in

2/17/22

peyman heidarian2

2/10/22

How to fix the empty 'pscands.1.ij0' file in PATCH folder

Dear all, I have run the step_geo in one of slave directory but still I am getting the empty '

unread,

How to fix the empty 'pscands.1.ij0' file in PATCH folder

Dear all, I have run the step_geo in one of slave directory but still I am getting the empty '

2/10/22

SM, Tonian Robinson3

1/26/22

According to this thread, the incident angle is to be used in TRAIN: https://groups.google.com/g/

unread,

According to this thread, the incident angle is to be used in TRAIN: https://groups.google.com/g/

1/26/22

Tonian Robinson2

1/26/22

MODIS data download

Ended up downloading the HDF files manually from lads: https://ladsweb.modaps.eosdis.nasa.gov and

unread,

MODIS data download

Ended up downloading the HDF files manually from lads: https://ladsweb.modaps.eosdis.nasa.gov and

1/26/22

陈宇, … vamsh...@gmail.com9

1/22/22

use of stamps_mc_header

Thanks for the code. On Thursday, September 13, 2018 at 4:38:09 AM UTC-5 Alex wrote: Hello, I did

unread,

use of stamps_mc_header

Thanks for the code. On Thursday, September 13, 2018 at 4:38:09 AM UTC-5 Alex wrote: Hello, I did

1/22/22

alejo.es...@hotmail.com, … Sadia Sadiq4

1/18/22

Kiled process in MATLAB with STAMPS

Hey! I am sorry I just saw it now. Unfortunately, I am still at the same point. If you got the

unread,

Kiled process in MATLAB with STAMPS

Hey! I am sorry I just saw it now. Unfortunately, I am still at the same point. If you got the

1/18/22

12/29/21

How to refer time series displacements to first image?

In ps_plot the third parameter is to select the reference image. I tried several times, but nothing

unread,

How to refer time series displacements to first image?

In ps_plot the third parameter is to select the reference image. I tried several times, but nothing

12/29/21

Ninad Bhagwat, … Suri Babu3

12/25/21

Problem in 1st step - reading image

Hi, already a lot of solutions given for this particular problem in STEP-Forum (STEP Forum (esa.int)

unread,

Problem in 1st step - reading image

Hi, already a lot of solutions given for this particular problem in STEP-Forum (STEP Forum (esa.int)

12/25/21

11/27/21

Error running mt_prep_isce

Updates: 1. Copying reference.slc (item 3 in the original post) did not work. 2. I noticed that

unread,

Error running mt_prep_isce

Updates: 1. Copying reference.slc (item 3 in the original post) did not work. 2. I noticed that

11/27/21

peyman heidarian, … Hari Shankar10

10/24/21

Make Install StaMPS

Yes this is on github only. On Sun, 24 Oct 2021, 14:35 peyman heidarian, <peyman...@gmail.com

unread,

Make Install StaMPS

Yes this is on github only. On Sun, 24 Oct 2021, 14:35 peyman heidarian, <peyman...@gmail.com

10/24/21

peyman heidarian, Suri Babu2

10/20/21

Setting up the MEAM, NCL and GTM software to apply complete package of StaMPS

Please check it once Peyman, Maybe it is useful for you. PSI using SNAP-STAMPS platform in WSL part 2

unread,

Setting up the MEAM, NCL and GTM software to apply complete package of StaMPS

Please check it once Peyman, Maybe it is useful for you. PSI using SNAP-STAMPS platform in WSL part 2

10/20/21

Caleb Kelly, … Hari Shankar4

10/14/21

make_single_reference_stack_isce error: badly placed ()'s

Thank your both very much!!! Changing slc_stack_master to slc_stack_reference in input_file got me

unread,

make_single_reference_stack_isce error: badly placed ()'s

Thank your both very much!!! Changing slc_stack_master to slc_stack_reference in input_file got me

10/14/21

Tonian Robinson, Suri Babu6

10/12/21

ISCE (stripmapstack) to StaMPS (PS) - Error in llh2local (line 39). z=llh(2,:)~=0;

Thank you On Tue, 12 Oct 2021, 23:30 Tonian Robinson, <ton...@mail.usf.edu> wrote: I noticed

unread,

ISCE (stripmapstack) to StaMPS (PS) - Error in llh2local (line 39). z=llh(2,:)~=0;

Thank you On Tue, 12 Oct 2021, 23:30 Tonian Robinson, <ton...@mail.usf.edu> wrote: I noticed

10/12/21

Vittorio Bisaglia, … Suri Babu5

9/21/21

PS - SBAS Dolomites landslide

Thank you. But page is not opening On Tue, 21 Sep 2021, 17:39 Vittorio Bisaglia, <vittorio.

unread,

PS - SBAS Dolomites landslide

Thank you. But page is not opening On Tue, 21 Sep 2021, 17:39 Vittorio Bisaglia, <vittorio.

9/21/21

milad moazezian

9/5/21

error 127 when make !

HI when I want to make src folder i get this error : g++ -O3 -c -o calamp.o calamp.c make: g++:

unread,

error 127 when make !

HI when I want to make src folder i get this error : g++ -O3 -c -o calamp.o calamp.c make: g++:

9/5/21

9/4/21

Stamps output - how to spot unwrapping and atmospheric errors

Hello I've run the SNAP-StaMPS workflow for a masters project looking at subsidence on a golf

unread,

Stamps output - how to spot unwrapping and atmospheric errors

Hello I've run the SNAP-StaMPS workflow for a masters project looking at subsidence on a golf

9/4/21

alejo.es...@hotmail.com, Tonian Robinson2

8/25/21

Try this following along with this site: https://aria.atlassian.net/wiki/spaces/ARIA/pages/18317313/

unread,

Try this following along with this site: https://aria.atlassian.net/wiki/spaces/ARIA/pages/18317313/

8/25/21

David Bekaert, Engr. Bazgha Jabeen2

7/19/21

Re: [train_support] Which parameters should I use to evaluate the performance of atmospheric correction?

Hello everyone, I have done atmospheric correction using linear method described in TRAIN manual and

unread,

Re: [train_support] Which parameters should I use to evaluate the performance of atmospheric correction?

Hello everyone, I have done atmospheric correction using linear method described in TRAIN manual and

7/19/21

Tom, … Tonian Robinson3

6/12/21

Problems runing StaMPS on ubuntu14.04

Did you figure this out? On Thursday, August 9, 2018 at 4:23:59 AM UTC-4 Katleen Wils wrote: Hi Tom,

unread,

Problems runing StaMPS on ubuntu14.04

Did you figure this out? On Thursday, August 9, 2018 at 4:23:59 AM UTC-4 Katleen Wils wrote: Hi Tom,

6/12/21

Search

Clear search

Close search

Google apps

Main menu