[stunnel-users] Stunnel.log file not got created
ankur....@wipro.com
Hi,
There is one case in my environment where secure connection to server
doesn't happen...reason is only client hello is sent in ethereal traces
and no server hello reply has been sent.although I have enable debug
level 7 in stunnel.conf file but then also stunnel.log file has not been
created.If server is the setup on which stunnel package is installd,then
is there anything to do with stunnel package if server hello reply has
not been sent for client hello meaasge.
Can anybody tell in what cases server hello message is not sent.
Regards
Ankur
Please do not print this email unless it is absolutely necessary.
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
_______________________________________________
stunnel-users mailing list
stunne...@mirt.net
http://stunnel.mirt.net/mailman/listinfo/stunnel-users
Carter Browne
You have to specify a log file in the configuration file, e.g.;
output = stunnel.log
The location of the log file depends on the environment and version you
are running. In Windows, the above statement puts the log file in
%programfiles%\stunnel
In Linux in versions through 4.29, I used
output = /etc/stunnel/stunnel.log
which puts the log file in
/etc/stunnel.
I did not use version 4.30, but in version 4.31 the directory is
relative to the chroot so I now use
output = /stunnel.log
which puts the log file in
/usr/local/var/lib/stunnel
using the standard settings.
Carter
Carter Browne
CBCS
cbr...@cbcs-usa.com
781-721-2890
> .
ankur....@wipro.com
thanks for the reply but this thing I already know...i have
changed the file location also...the problem is we are having two client
server setups in which we have to implement the secure connection...the
thing is on one setup everything is working fine but with the other
setup issue is coming in TLS handshak itself...and both the setups are
having same configuration as well as software...and same environment
also...we can not also say that it is setup issue....i just want to know
the cases in which if tls handshake is not throing a alert message of
warning/fatal....then why this server hello message is not seen...is
stunnel have something to do with sending of this server hello
message...
Best Regards
Ankur
Carter Browne
If you post the sections of the log messages from both sides about the
failure, someone on the group should be able to help you with your problem.
Carter
Carter Browne
CBCS
cbr...@cbcs-usa.com
781-721-2890