[MRTG] Cpu Load Monitoring

[Robert Hough]

I know this has been gone over once before, but something must be wrong
here. I used the same information, I found digging through the archives,
and I'm getting now data while monitoring the cpu load on my Cisco 7505,
here's what the config entry looks like.

WorkDir: /var/www/docs/iServe-Core0/cpu
IconDir: /images/mrtg
Target[207.250.219.254]: (line continued below)
1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:Not...@207.250.219.254
MaxBytes[207.250.219.254]: 100
Options[207.250.219.254]: growright,gauge,nopercent
YLegend[207.250.219.254]: CPU Utilization
ShortLegend[207.250.219.254]: %
LegendI[207.250.219.254]:  1 Min:
LegendO[207.250.219.254]:  5 Min:
Legend1[207.250.219.254]: AvgBusy 1 Min
Legend2[207.250.219.254]: AvgBusy 5 Min
Legend3[207.250.219.254]: MaxBusy 1 Min
Legend4[207.250.219.254]: MaxBusy 5 Min
Title[207.250.219.254]: iServe-Core0 CPU utilization
PageTop[207.250.219.254]: <H1>iServe-Core0 CPU utilization </H1>
<TABLE> <TR><TD>IP:</TD><TD>core0.iserve.net (207.250.219.254)</TD></TR>
</TABLE>

What am I doing wrong? I know there has to be some type of load on the
router, especially after yesterdays starwars craze. I even offered the
trailor on a couple of our sites, just to try and increase the load, but
nothing...

__ _______
|__| __|.-----.----.--.--.-----. .-------------------------------.
| |__ || -__| _| | | -__| | Robert Hough (r...@iserve.net) |
|__|_______||_____|__| \___/|_____| | 317-802-3036 / 317-876-0846 |
_____________________________________________________________________|

--
* To unsubscribe from the mrtg mailing list, send a message with the
subject: unsubscribe to mrtg-r...@list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg