Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
[PATCH] Add basic fan control support to smu
1 view
Skip to first unread message
Dominic Marks
Apr 6, 2015, 6:42:05 PM4/6/15
to
Hi
I bought a PowerMac8,1 and added this support, based on what I found in
tda(4). It's been lightly tested but it seems to work okay so far. One
thing I've noticed is that while the fan speeds are set independently
hw.sensors.smu0.fanX always shows a common value. I've not looked into that
further. Patch linked below because I believe Gmail will consume the tabs
otherwise.
https://gist.githubusercontent.com/djwmarks/026cf7aae59b20591366/raw/b8d9a6252715d69849c695c284ca5a8ac5299516/gistfile1.txt
Cheers
Dominic
I bought a PowerMac8,1 and added this support, based on what I found in
tda(4). It's been lightly tested but it seems to work okay so far. One
thing I've noticed is that while the fan speeds are set independently
hw.sensors.smu0.fanX always shows a common value. I've not looked into that
further. Patch linked below because I believe Gmail will consume the tabs
otherwise.
https://gist.githubusercontent.com/djwmarks/026cf7aae59b20591366/raw/b8d9a6252715d69849c695c284ca5a8ac5299516/gistfile1.txt
Cheers
Dominic
0 new messages