OpenBSD/socppc on RouterBoard RB600

[Martin Kukac]

Hello,

I hope this is the right list to post to, but I tested OpenBSD/socppc on
the RouterBoard RB600, the older non-A variant with just 64MB of RAM. It
works with no problems, I thouth it's a thing worth mentioning.

Thanks to all developers, if any of them is present here.

Martin

[Dariusz Swiderski]

Hi,

This is very interesting, can you tell me what firmware you have there? and what CF did you use for storage. I used to run into a lot
of problems with wd devices on those boards and abandoned all attempts.

greets
--
Maciej 'sfires' Swiderski
---------------------------------------------------
SysAdm | SecOff | DS14145-RIPE | DS11-6BONE
193.178.161.0/24 | 3ffe:8010:7:2a::/64 | AS16288
---------------------------------------------------
A mouse is a device used to point at the xterm you want to type in.

[Martin Kukac]

Hello,

here is the board info:

Board Info:

Board type: 600
Serial number: 160201FCF843
Firmware version: 2.11
CPU frequency: 400 MHz
Memory size: 64 MB

and here is info about CF used:

Model: SanDisk SDCFH-512, Rev: FhCA0145, Serial #: 103420G0903J4720
Device type: ATAPI, removable
Cylinders: 993, heads: 16, sec/track: 63, total sectors: 1000944
Device capabilities:
Device supports the following standards:
ATA-9

It's just a small 512MB card, there is only a plain system for testing
purposes.

I hope this helps.

Martin