Intel DG31PR and RTL8168/8111 issue
Abdullah Ibn Hamad Al-Marri
This is a new server with latest RELENG_7 src and latest BIOS as well.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #0: Mon Dec 3 23:37:27 UTC 2007
lo...@mx1.wearab.net:/usr/obj/usr/src/sys/MX1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 4275109888 (4077 MB)
avail memory = 4106035200 (3915 MB)
ACPI APIC Table: <INTEL DG31PR>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <INTEL> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on
acpi0
acpi_hpet0: <High Precision Event Timer> iomem
0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc070-0xc077 mem
0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0200000-0xd02fffff
irq 16 at device 2.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xa000-0xa0ff mem
0xd0010000-0xd0010fff irq 21 at device 6.0 on pci4
sis0: Silicon Revision: DP83815D
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:30:ab:19:8b:c3
sis0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0xc060-0xc067,0xc050-0xc053,0xc040-0xc047,0xc030-0xc033,0xc020-0xc02f
irq 17 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on isa0
Timecounters tick every 1.000 msec
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150
ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master
SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
sis0: Applying short cable fix (reg=f5)
none1@pci0:3:0:0: class=0x020000 card=0xd6088086
chip=0x816810ec rev=0x01 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
Regards,
-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/
____________________________________________________________________________________
Get easy, one-click access to your favorites.
Make Yahoo! your homepage.
http://www.yahoo.com/r/hs
_______________________________________________
freebsd...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stabl...@freebsd.org"
Abdullah Ibn Hamad Al-Marri
----- Original Message ----
> From: Pyun YongHyeon <pyu...@gmail.com>
> To: Abdullah Ibn Hamad Al-Marri <wear...@yahoo.ca>
> Cc: FreeBSD STABLE <freebsd...@freebsd.org>
> Sent: Tuesday, December 4, 2007 3:44:53 AM
> Subject: Re: Intel DG31PR and RTL8168/8111 issue
>
> On Mon, Dec 03, 2007 at 12:52:33PM -0800, Abdullah Ibn Hamad
> Al-Marri
>
wrote:
> > Hello Pyun,
> >
> > This is a new server with latest RELENG_7 src and latest BIOS
> as
>
well.
> >
> > Copyright (c) 1992-2007 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> > 1994
> > The Regents of the University of California. All rights
> > reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 7.0-BETA4 #0: Mon Dec 3 23:37:27 UTC 2007
> > lo...@mx1.wearab.net:/usr/obj/usr/src/sys/MX1
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2666.62-MHz
> > K8-class CPU)
> > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
> >
>
Features=0xbfebfbff
> OV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> >
>
Features2=0xe3fd
> > AMD Features=0x20100800
> > AMD Features2=0x1
> > Cores per package: 2
> > usable memory = 4275109888 (4077 MB)
> > avail memory = 4106035200 (3915 MB)
> > ACPI APIC Table:
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > cpu0 (BSP): APIC ID: 0
> > cpu1 (AP): APIC ID: 1
> > ioapic0 irqs 0-23 on motherboard
> > acpi0: on motherboard
> > acpi0: [ITHREAD]
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on
> > acpi0
> > acpi_hpet0: iomem
> > 0xfed00000-0xfed003ff on acpi0
> > Timecounter "HPET" frequency 14318180 Hz quality 900
> > cpu0: on acpi0
> > est0: on cpu0
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> > device_attach: est0 attach returned 6
> > p4tcc0: on cpu0
> > cpu1: on acpi0
> > est1: on cpu1
> > est: CPU supports Enhanced Speedstep, but is not recognized.
> > est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> > device_attach: est1 attach returned 6
> > p4tcc1: on cpu1
> > pcib0: port 0xcf8-0xcff on acpi0
> > pci0: on pcib0
> > pcib1: irq 16 at device 1.0 on pci0
> > pci1: on pcib1
> > vgapci0: port 0xc070-0xc077 mem
> > 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0200000-0xd02fffff
> > irq 16 at device 2.0 on pci0
> > pcib2: irq 16 at device 28.0 on pci0
> > pci2: on pcib2
> > pcib3: irq 17 at device 28.1 on pci0
> > pci3: on pcib3
> > pci3: at device 0.0 (no driver attached)
> > pcib4: at device 30.0 on pci0
> > pci4: on pcib4
> > sis0: port 0xa000-0xa0ff mem
> > 0xd0010000-0xd0010fff irq 21 at device 6.0 on pci4
> > sis0: Silicon Revision: DP83815D
> > miibus0: on sis0
> > ukphy0: PHY 0 on miibus0
> > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > sis0: Ethernet address: 00:30:ab:19:8b:c3
> > sis0: [ITHREAD]
> > isab0: at device 31.0 on pci0
> > isa0: on isab0
> > atapci0: port
> >
>
0xc060-0xc067,0xc050-0xc053,0xc040-0xc047,0xc030-0xc033,0xc020-0xc02f
> > irq 17 at device 31.2 on pci0
> > atapci0: [ITHREAD]
> > ata2: on atapci0
> > ata2: [ITHREAD]
> > ata3: on atapci0
> > ata3: [ITHREAD]
> > pci0: at device 31.3 (no driver attached)
> > acpi_button0: on acpi0
> > acpi_button1: on acpi0
> > atkbdc0: port 0x60,0x64 irq 1 on
> > acpi0
> > atkbd0: irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > atkbd0: [ITHREAD]
> > sc0: at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff
> > on isa0
> > Timecounters tick every 1.000 msec
> > ad4: 238475MB at ata2-master SATA150
> > ad6: 715404MB at ata3-master
> > SATA150
> > SMP: AP CPU #1 Launched!
> > Trying to mount root from ufs:/dev/ad4s1a
> > sis0: Applying short cable fix (reg=f5)
> >
> >
> > none1@pci0:3:0:0: class=0x020000 card=0xd6088086
> > chip=0x816810ec rev=0x01 hdr=0x00
> > vendor = 'Realtek Semiconductor'
> > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
> > class = network
> > subclass = ethernet
> >
>
> Try attached patch. I think I posted similiar patches several times
> to get feedback but I have never heard of success/failure.
>
> --
> Regards,
> Pyun YongHyeon
>
>
> -----Inline Attachment Follows-----
>
> Index: dev/re/if_re.c
> ===================================================================
> RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v
> retrieving revision 1.98
> diff -u -r1.98 if_re.c
> --- dev/re/if_re.c 3 Dec 2007 01:28:08 -0000 1.98
> +++ dev/re/if_re.c 4 Dec 2007 00:36:06 -0000
> @@ -182,6 +182,8 @@
> "RealTek 8168/8111B PCIe Gigabit Ethernet" },
> { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN2,
> "RealTek 8168/8111B PCIe Gigabit Ethernet" },
> + { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN3,
> + "RealTek 8168/8111B PCIe Gigabit Ethernet" },
> { RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169,
> "RealTek 8169 Gigabit Ethernet" },
> { RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169S,
> @@ -223,6 +225,7 @@
> { RL_HWREV_8100E, RL_8169, "8100E"},
> { RL_HWREV_8101E, RL_8169, "8101E"},
> { RL_HWREV_8168_SPIN2, RL_8169, "8168"},
> + { RL_HWREV_8168_SPIN3, RL_8169, "8168"},
> { 0, 0, NULL }
> };
>
> @@ -683,13 +686,19 @@
>
> hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
>
> - if (hwrev == RL_HWREV_8100E || hwrev == RL_HWREV_8101E ||
> - hwrev == RL_HWREV_8168_SPIN1 || hwrev ==
> RL_HWREV_8168_SPIN2)
>
{
> + switch (hwrev) {
> + case RL_HWREV_8100E:
> + case RL_HWREV_8101E:
> + case RL_HWREV_8168_SPIN1:
> + case RL_HWREV_8168_SPIN2:
> + case RL_HWREV_8168_SPIN3:
> CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1]));
> CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0]));
> - } else {
> + break;
> + default:
> CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
> CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
> + break;
> }
> }
>
> @@ -940,6 +949,9 @@
> sc->rl_btag = rman_get_bustag(sc->rl_res);
> sc->rl_bhandle = rman_get_bushandle(sc->rl_res);
> hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
> +#if 1
> + printf("hwrev = %x\n", hwrev);
> +#endif
> bus_release_resource(dev, RL_RES,
> RL_RID, sc->rl_res);
> if (t->rl_basetype == hwrev) {
> @@ -1320,6 +1332,7 @@
> case RL_HWREV_8169_8110SB:
> case RL_HWREV_8169_8110SC:
> case RL_HWREV_8168_SPIN2:
> + case RL_HWREV_8168_SPIN3:
> re_gmii_writereg(dev, 1, 0x1f, 0);
> re_gmii_writereg(dev, 1, 0x0e, 0);
> break;
> Index: pci/if_rlreg.h
> ===================================================================
> RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v
> retrieving revision 1.68
> diff -u -r1.68 if_rlreg.h
> --- pci/if_rlreg.h 26 Nov 2007 18:25:07 -0000 1.68
> +++ pci/if_rlreg.h 4 Dec 2007 00:36:06 -0000
> @@ -156,6 +156,7 @@
> #define RL_HWREV_8100E 0x30800000
> #define RL_HWREV_8101E 0x34000000
> #define RL_HWREV_8168_SPIN2 0x38000000
> +#define RL_HWREV_8168_SPIN3 0x38400000
> #define RL_HWREV_8139 0x60000000
> #define RL_HWREV_8139A 0x70000000
> #define RL_HWREV_8139AG 0x70800000
>
>
>
> -----Inline Attachment Follows-----
>
I tried this patch and it worked before I got the patch you sent.
Index: dev/re/if_re.c
===================================================================
RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v
retrieving revision 1.95
diff -u -r1.95 if_re.c
--- dev/re/if_re.c 14 Aug 2007 02:00:04 -0000 1.95
+++ dev/re/if_re.c 30 Oct 2007 01:05:06 -0000
@@ -180,6 +180,8 @@
"RealTek 8168/8111B PCIe Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN2,
"RealTek 8168/8111B PCIe Gigabit Ethernet" },
+ { RT_VENDORID, RT_DEVICEID_8168, RL_HWREV_8168_SPIN3,
+ "RealTek 8168/8111B PCIe Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169,
"RealTek 8169 Gigabit Ethernet" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_HWREV_8169S,
@@ -221,6 +223,7 @@
{ RL_HWREV_8100E, RL_8169, "8100E"},
{ RL_HWREV_8101E, RL_8169, "8101E"},
{ RL_HWREV_8168_SPIN2, RL_8169, "8168"},
+ { RL_HWREV_8168_SPIN3, RL_8169, "8168"},
{ 0, 0, NULL }
};
@@ -676,14 +679,18 @@
*/
hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
-
- if (hwrev == RL_HWREV_8100E || hwrev == RL_HWREV_8101E ||
- hwrev == RL_HWREV_8168_SPIN1 || hwrev == RL_HWREV_8168_SPIN2) {
+ switch (hwrev) {
+ case RL_HWREV_8100E:
+ case RL_HWREV_8101E:
+ case RL_HWREV_8168_SPIN1:
+ case RL_HWREV_8168_SPIN2:
CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1]));
CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0]));
- } else {
+ break;
+ default:
CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
+ break;
}
}
@@ -1314,6 +1321,7 @@
case RL_HWREV_8169_8110SB:
case RL_HWREV_8169_8110SC:
case RL_HWREV_8168_SPIN2:
+ case RL_HWREV_8168_SPIN3:
re_gmii_writereg(dev, 1, 0x1f, 0);
re_gmii_writereg(dev, 1, 0x0e, 0);
break;
Index: pci/if_rlreg.h
===================================================================
RCS file: /home/ncvs/src/sys/pci/if_rlreg.h,v
retrieving revision 1.67
diff -u -r1.67 if_rlreg.h
--- pci/if_rlreg.h 24 Jul 2007 01:24:03 -0000 1.67
+++ pci/if_rlreg.h 30 Oct 2007 01:05:07 -0000
@@ -156,6 +156,7 @@
#define RL_HWREV_8100E 0x30800000
#define RL_HWREV_8101E 0x34000000
#define RL_HWREV_8168_SPIN2 0x38000000
+#define RL_HWREV_8168_SPIN3 0x38400000
#define RL_HWREV_8139 0x60000000
#define RL_HWREV_8139A 0x70000000
#define RL_HWREV_8139AG 0x70800000
I'll try the patch you sent too when the server reaches the ISP and being online.
Do you have any comments?