Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

memory for Asus P2B-DS

0 views
Skip to first unread message

Murphey

unread,
Nov 18, 1998, 3:00:00 AM11/18/98
to
I need some recommendations on 128Mb SDRAM memory for
an Asus P2B-DS.

Its stable at 100MHz bus speed with one processors.
Its unstable at 100MHz bus speed with two processors.
Its stable at 83MHz bus speed with two processors.

This is with only the CPU, memory and scsi disk
installed and I've swapped all the components so I know
all the parts are good.

I've seen references to CAS2 and CAS3 memory. My SDRAM
reports (via SPD) to be CAS3. That's supposed to run
at 100MHz. Asus's web page lists only a single NEC
part number for 128 Mb DIMMS (NEC D4564841G5-A10-9JF)
and I hesistate to try and order it since it might be
stale information.

Can anyone suggest any models or part numbers?

Thanks,
Rich

To Unsubscribe: send mail to majo...@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message

David G. Andersen

unread,
Nov 18, 1998, 3:00:00 AM11/18/98
to
Lo and Behold, Murphey said:
> I need some recommendations on 128Mb SDRAM memory for
> an Asus P2B-DS.
>
> I've seen references to CAS2 and CAS3 memory. My SDRAM
> reports (via SPD) to be CAS3. That's supposed to run
> at 100MHz. Asus's web page lists only a single NEC
> part number for 128 Mb DIMMS (NEC D4564841G5-A10-9JF)
> and I hesistate to try and order it since it might be
> stale information.
>
> Can anyone suggest any models or part numbers?

We use Viking's CAS2 DIMMS, part #: PE16722U4SN3-2226

They work like a charm with two processors @ 100Mhz. When
ordering, be sure to be explicit about the part number; even
then, we've had a supplier ship us CAS3 by mistake. grumble.

-Dave

0 new messages