>Description:
cdrecord tool can't find my recorder TEAC CDR-55S on SCSI-ID 0:4:0.
Log from dmesg:
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedf7000-0xfedf7fff irq 5 at device 20.0 on pci0
ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
Waiting 15 seconds for SCSI devices to settle
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-12TS 1.01> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <TEAC CD-R55S 1.0K> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DNES-309170W SA50> Fixed Direct Access SCSI-3 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
(da2:ahc0:0:2:0): SCB 0xb - timed out while idle, SEQADDR == 0xb
(da2:ahc0:0:2:0): Queuing a BDR SCB
(da2:ahc0:0:2:0): Bus Device Reset Message Sent
(da2:ahc0:0:2:0): no longer in timeout, status = 34b
ahc0: Bus Device Reset on A:2. 1 SCBs aborted
da2 at ahc0 bus 0 target 2 lun 0
da2: <iomega jaz 2GB E.17> Removable Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15)
da2: 1911MB (3915600 512 byte sectors: 255H 63S/T 243C)
Log from "cdrecord -scanbus":
Cdrecord 1.9 (i386-unknown-freebsd4.1) Copyright (C) 1995-2000 Jörg Schilling
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'IBM ' 'DDRS-39130D ' 'DC1B' Disk
0,1,0 1) 'IBM ' 'DNES-309170W ' 'SA50' Disk
0,2,0 2) 'iomega ' 'jaz 2GB ' 'E.17' Removable Disk
0,3,0 3) 'PLEXTOR ' 'CD-ROM PX-12TS ' '1.01' Removable CD-ROM
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
How can I correct this problem.
>How-To-Repeat:
It's repeated every Time.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majo...@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message