Digidesign ProTools and EB7 compatibility
11 views
Skip to first unread message
for...@magma.com
Jul 17, 2008, 5:04:19 PM7/17/08
to Magma Expansion Support Forums
DigiDesign ProTools PCIE HD7 (7.4.2) is compatible with EB7 using with
MacPro running 10.5.3
If you are seeing problem such as unable to see or communicate with
ProTools Hardware you must check the TDM brown flex cable, this is the
cable residing on top of Protools cards, make sure it is connected
from port B of Core card to port A of Accel or Process card.
HW Buffer 256, CPU 85%, DAE2
MAX Playback
===========
48K: 192 out of 192
96k:96 out of 96
192k: 36 out of 36
Max Record
===========
48K: 192 out of 192
96k:96 out of 96
192k: 36 out of 36
50/50
===========
48k:(96R/96P) = 192 out of 192
96K:(48R/48P) = 96 out of 96
192K:(18r/18p) = 36 out of 36
MacPro running 10.5.3
If you are seeing problem such as unable to see or communicate with
ProTools Hardware you must check the TDM brown flex cable, this is the
cable residing on top of Protools cards, make sure it is connected
from port B of Core card to port A of Accel or Process card.
HW Buffer 256, CPU 85%, DAE2
MAX Playback
===========
48K: 192 out of 192
96k:96 out of 96
192k: 36 out of 36
Max Record
===========
48K: 192 out of 192
96k:96 out of 96
192k: 36 out of 36
50/50
===========
48k:(96R/96P) = 192 out of 192
96K:(48R/48P) = 96 out of 96
192K:(18r/18p) = 36 out of 36
Reply all
Reply to author
Forward
0 new messages