Hp Drive Key Boot Utility Windows 7 64bit
Vickiana Sconyers
So my PC crashed a couple days ago and I need to run a clean install of windows 10 from a bootable USB. The only other computer I have to work with is a Chrome OS, and I can't seem to find clear instructions on how to create a bootable USB from Chrome OS. Most of my search results are pulling up how to create a bootable USB to use within the Chromebook itself, whereas I want it to be used on a PC. Any ideas on how to do this?
Download the ISO file for Windows 10 from the Microsoft website here. Add the Chrome extension "Chromebook Recovery Utility." (Click here) Rename the downloaded file from filename.iso to filename.bin(The file name is usually called "Win10_22H2_English_x64v1.iso"). Launch Chromebook Recovery Utility and click the settings button in the top right corner, select "Use local image". Select the filename.bin that you downloaded and renamed. Insert and select the USB drive you are putting the iso on, wait for it to load, your done!
If your PC has the capacity to connect two USB devices, and you dohave two large-enough USB disks, then use one disk for booting anoperating system that can create on the other diskthe required Windows installation from the ISO.
I'm need to find a method to programmatically determine which disk drive Windows is using to boot. In other words, I need a way from Windows to determine which drive the BIOS is using to boot the whole system.
p.s. Just reading the first sectors of the hard disk isn't reveling anything. On my dev box I have two hard disks, and when I look at the contents of the first couple of sectors on either of the hard disks I have a standard boiler plate MBR.
Edit to clarify a few things.The way I want to identify the device is with a string which will identify a physical disk drive (as opposed to a logical disk drive). Physical disk drives are of the form "\\.\PHYSICALDRIVEx" where x is a number. On the other hand, a logical drive is identified by a string of the form, "\\.\x" where x is a drive letter.
Edit to discuss a few of the ideas that were thrown out.Knowing which logical volume Windows used to boot doesn't help me here. Here is the reason. Assume that C: is using a mirrored RAID setup. Now, that means we have at least two physical drives. Now, I get the mapping from Logical Drive to Physical Drive and I discover that there are two physical drives used by that volume. Which one did Windows use to boot? Of course, this is assuming that the physical drive Windows used to boot is the same physical drive that contains the MBR.
You can use WMI to figure this out. The Win32_BootConfiguration class will tell you both the logical drive and the physical device from which Windows boots. Specifically, the Caption property will tell you which device you're booting from.
2 and 3 should be easy to find - I'm not so sure about 1. Though you can raw disk read to find an MBR, that doesn't mean it's the BIOS boot device this time or even next time (you could have multiple disks with MBRs).
You really can't even be sure that the PC was started from a hard drive - it's perfectly possible to boot Windows from a floppy. In that case, both 1 and 2 would technically be a floppy disk, though 3 would remain C:\Windows.
On Windows 10.Open "Computer Management"Look for "Storage" in list "left top side of page"select "Disk Management"On section of page showing the list of disks and the partitions find the disk that has the partition assigned as drive C:On that disk containing C: partitionUse the right mouse button to select the Square section containing The Disk Number, Type of drive and size in GB . When menu opens select the Properties.A window will open showing what drive hardware was used.
I'm looking to create a Windows 11 bootable USB from my Mac but am unsure of the best approach to take. My main goal is to have a USB drive prepared so I can install Windows 11 on a different PC. I'm aware that there are several tools and processes for creating bootable USBs for Windows, but I'm not clear on which methods are compatible with macOS, especially with the latest updates and security features of macOS that might affect the process. If anyone has experience with this or can offer a step-by-step guide that is confirmed to work with the current versions of macOS and Windows 11, I would greatly appreciate the assistance.
Following the steps was a breeze. I selected my Windows 11 ISO file, plugged in my USB drive, and chose it as the destination. The moment of truth came when I clicked the "BURN" button. I was pleasantly surprised to see the process begin without any hiccups. It was reassuring to see the progress bar filling up, indicating everything was moving along as expected.
The entire process took about 5 minutes, just as the application mentioned. During this time, I made sure not to unplug the USB, curious and a bit anxious to see if it would indeed be bootable once done. Once the progress bar hit 100% and the application notified me that the process was complete, I ejected the USB drive and headed over to my new PC to test it out.
Booting up the new PC with the USB plugged in was the moment of truth. To my delight, the Windows 11 installation screen appeared without any issues, proving that the WonderISO tool had worked perfectly. It recognized the USB as bootable media, and from there, installing Windows 11 was as straightforward as it gets.
Select Action: In Boot Camp Assistant, select "Action" from the menu bar, then click on "Download Windows Support Software." This step ensures your Mac has the necessary drivers for Windows.
Create Windows Installation Disk: After downloading the Windows Support Software, select "Action" again and then choose "Create a Windows 11 or later install disk." Boot Camp Assistant will prompt you to choose the Windows 11 ISO file and the USB drive as the destination.
Now, you have a bootable USB drive containing Windows 11 installer files. You can use this USB drive to install Windows 11 on a different PC by booting from it. Remember to check the compatibility of the PC with Windows 11 before proceeding with the installation.
Step 1: Download the Windows 11 ISO Visit the official Microsoft Windows 11 download page and download the Windows 11 ISO file. Choose the edition you need and follow the prompts to download the ISO.
Connect your USB drive to your Mac. Open Disk Utility (found in Applications > Utilities). Select your USB drive from the sidebar, click "Erase," and format it as MS-DOS (FAT) with a Master Boot Record (MBR) scheme. This will make it compatible with Windows installation.
Since Boot Camp Assistant doesn't support creating Windows 11 bootable USB drives, download a third-party utility like Syscute WinBootMate. These tools are capable of creating a bootable Windows USB on macOS.
Step 4: Create the Bootable USB Launch the third-party tool you downloaded in Step 3. Select the Windows 11 ISO file you downloaded earlier and choose your USB drive as the destination. Follow the on-screen instructions to create the bootable drive. This process will take some time, depending on the speed of your USB drive and Mac.
Your Windows 11 bootable USB drive is now ready. You can use it to install Windows 11 on a compatible PC by inserting the USB drive, rebooting the PC, and booting from the USB drive. Make sure to change the boot order in the BIOS/UEFI settings if necessary.
You can create a bootable USB flash drive to use to deploy Windows Server Essentials. The first step is to prepare the USB flash drive by using DiskPart, which is a command-line utility. For information about DiskPart, see DiskPart Command-Line Options.
In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
Be careful if you have any other storage devices attached to the box in question. One time, a friend of mine used DBAN to nuke a machine and accidentally wiped the same flash drive he booted from and DBAN was stored on.
I have used Active Boot with its Active Kill Disk (DOD rated wipe) for the last 5 years or so. The price is 100-120$ for a lisence, but I have to say, the tools this bootable flash OS holds are priceless. Active Kill Disk, mapping drives, remote connections, password wipes in the SAM DB for lost windows passwords, and plethora of other tools at your disposal all contained within a flash drive less than 256MB. It also contains Active Data Recovery, partition managers and a few other drive related tools, including Smart testing.
b37509886e