PPC board crashed my computer

[loyou]

Everything is all right yesterday night.
This morning I powered on ppc which had connected to my computer with
serial line.
After I pressed the button,my keyboard and mouse are all die.
At the beginning ,i thought maybe my system is crashed,so I reboot.
But I'm wrong,after reboot,my keyboard and mouse still didn't work.
All my usb device didn't work on my computer,so is my keyboard and
mouse(all usb).
I found a ps/2 keyboard and it's ok on my computer.I entered my
system,my video card
didn't work either.
This is my lspci result(seems less than before):

00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
DRAM Controller/Host-Hub Interface (rev 03)
00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
Host-to-AGP Bridge (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/
ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/
ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/
ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller
(rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS
[Radeon 9550]
01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon
9550] (Secondary)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)


Luckily，the ppc is ok.If it crashes,I'll "die".
Any suggestions except for take it to repairing?

[zhangjin wu]

oh, do they have been burnt?

在07-11-20，loyou <loy...@gmail.com> 写道：

--
Student. Wu Zhangjin            
Lanzhou University      http://www.lzu.edu.cn
Distributed & Embedded System Lab      http://dslab.lzu.edu.cn
School of Information Science and Engeneering         http://xxxy.lzu.edu.cn
zhan...@gmail.com
160 mailbox 648 sub mailbox. Lanzhou 730107   .P.R.China
Tel:+86-931-5294051

[tomsu]

在 07-11-20，loyou<loy...@gmail.com> 写道：

>
> Everything is all right yesterday night.
> This morning I powered on ppc which had connected to my computer with
> serial line.
> After I pressed the button,my keyboard and mouse are all die.
> At the beginning ,i thought maybe my system is crashed,so I reboot.
> But I'm wrong,after reboot,my keyboard and mouse still didn't work.
> All my usb device didn't work on my computer,so is my keyboard and
> mouse(all usb).
> I found a ps/2 keyboard and it's ok on my computer.I entered my
> system,my video card
> didn't work either.

Does this mean that X didn't work? Or how could you login os again ?
If X server failed to work, the reason might be the failed Input Devices which
specified in xorg.conf

Take it easy. Just usb devices were crashed :P
Check your box for bad smell.

[Feng Sun]

sound card doesn't work,graphics card is ok,
maybe video card is not correctly expressed by me.
They didn't burn,if so,i'll be sure that i'll have to go to repaire it.

在07-11-20，tomsu <hell...@gmail.com> 写道：

--

It's never too late to study.