Re: [LUFA Support : 3367] How to view serial output on Windows from AT90USBKEY running LUFA in host mode
63 views
Skip to first unread message
Jim Paris
Jun 19, 2012, 4:08:13 PM6/19/12
to lufa-s...@googlegroups.com
inizen wrote:
> Hi there:
>
> I have got LUFA running in USB host mode on the AT90USBKEY but want to see
> the debug serial output from the demo apps on my Windows dev box (and the
> USB port is busy doing host-y things). Could someone please point me to a
> guide how to achieve this? Presumably I need to connect the AT90USB1287
> serial I/O pins to some TTL serial to USB converter?
Yep, a 3.3V TTL to USB serial converter would do the trick. On the
AT90USBKEY:
J4 pin 2 = GND
J4 pin 7 = TX (output from AT90USBKEY)
J4 pin 8 = RX (input to AT90USBKEY)
-jim
> Hi there:
>
> I have got LUFA running in USB host mode on the AT90USBKEY but want to see
> the debug serial output from the demo apps on my Windows dev box (and the
> USB port is busy doing host-y things). Could someone please point me to a
> guide how to achieve this? Presumably I need to connect the AT90USB1287
> serial I/O pins to some TTL serial to USB converter?
Yep, a 3.3V TTL to USB serial converter would do the trick. On the
AT90USBKEY:
J4 pin 2 = GND
J4 pin 7 = TX (output from AT90USBKEY)
J4 pin 8 = RX (input to AT90USBKEY)
-jim
inizen
Jun 20, 2012, 3:49:19 AM6/20/12
to lufa-s...@googlegroups.com
Many thanks ... great community :)
Reply all
Reply to author
Forward
0 new messages