AVRISP-MKII clone compatibility with Atmel Studio 7
230 views
Skip to first unread message
Grzegorz Niemirowski
Nov 24, 2015, 4:59:21 AM11/24/15
to lufa-s...@googlegroups.com
Hello
I try to use AVR-ISP MKII clone with Atmel Studio 7. I get following error:
ModuleName: TCF (TCF command: Tool:connect failed.)
write error
With libusb compatibility enabled I get:
ModuleName: TCF (TCF command: Tool:connect failed.)
Read from USB device endpoint 130 failed: Invalid pipe number (0x20000002).
What can be the cause? Some people say that it is enough to set
FIRMWARE_VERSION_MINOR to 0x18 and to undefine LIBUSB_DRIVER_COMPAT and the
clone shoul work with AS7. But it doesn't help. Maybe it's Jungo issue? I
tried 11.5 and 12.0, still no luck.
Best regards,
Grzegorz Niemirowski
I try to use AVR-ISP MKII clone with Atmel Studio 7. I get following error:
ModuleName: TCF (TCF command: Tool:connect failed.)
write error
With libusb compatibility enabled I get:
ModuleName: TCF (TCF command: Tool:connect failed.)
Read from USB device endpoint 130 failed: Invalid pipe number (0x20000002).
What can be the cause? Some people say that it is enough to set
FIRMWARE_VERSION_MINOR to 0x18 and to undefine LIBUSB_DRIVER_COMPAT and the
clone shoul work with AS7. But it doesn't help. Maybe it's Jungo issue? I
tried 11.5 and 12.0, still no luck.
Best regards,
Grzegorz Niemirowski
Reply all
Reply to author
Forward
0 new messages