install problems: OpenBSD 3.0

[Sebastian Rother]

Is it a bug or not?

I installed OpenBSD 2.9 on a Acer Atlos 9000/M9B with 3 SCSI hdds (2x
Fujitzu 4GB, 1x IBM 4GB) and it works well.

But some days after I installed OpenBSD 3.0 and OpenBSD think that:

-formating-
X = for every hdd another number

Warning X sector(s) in last cylinder unallocated

But i can installed it!
I configured all (networkl bla bla) and then -> reboot:

-reboot-

can't find CRON (and the other deamons (like sendmail) too)

init: can't exec getty '/usr/libexec/getty for port /dev/ttyC0
init: can't exec getty '/usr/libexec/getty for port /dev/ttyC1
init: can't exec getty '/usr/libexec/getty for port /dev/ttyC2
init: can't exec getty '/usr/libexec/getty for port /dev/ttyC3
init: can't exec getty '/usr/libexec/getty for port /dev/ttyC4
init: can't exec getty '/usr/libexec/getty for port /dev/ttyC5

Whats wrong? I installed OpenBSd 2.9 again and it works fine!
-I didn't tested the update function-

Could it be a bug? Or could it be that I'm ****** ? ,o)

I have another problem with BSD on my workstation ,o)
I installed OpenBSD 3.0 and i tell the setup to use the full hdd space.
formating: ok, no errors
installation: ok, no errors

I boot and it stoped! ,o(
(i didn't noticed the error message but it was something like this: "wd0
partition 3" no other message nad it didn't starup ,o( )

On my 3rd PC (Firewall) OpenBSD 2.9 / 3.0 works well, but i need a
workstation and my server ,o)

Ok sorry for the wonderful english ,o)

mfg. Sebastian Rother ,o)

[Scott Francis]

On Fri, May 11, 2001 at 11:21:04PM +0200, s.ro...@cryox.de said:
> Is it a bug or not?
>
>
> I installed OpenBSD 2.9 on a Acer Atlos 9000/M9B with 3 SCSI hdds (2x
> Fujitzu 4GB, 1x IBM 4GB) and it works well.
>
> But some days after I installed OpenBSD 3.0 and OpenBSD think that:

installed how? Did you upgrade from CVS/source? Did you use a 3.0 CD or boot
floppy and select the '(U)pgrade' option? A dmesg might also be useful.

[snip]

> Whats wrong? I installed OpenBSd 2.9 again and it works fine!

installed how?

> I have another problem with BSD on my workstation ,o)
> I installed OpenBSD 3.0 and i tell the setup to use the full hdd space.
> formating: ok, no errors
> installation: ok, no errors
>
> I boot and it stoped! ,o(
> (i didn't noticed the error message but it was something like this: "wd0
> partition 3" no other message nad it didn't starup ,o( )

see the FAQ.

> On my 3rd PC (Firewall) OpenBSD 2.9 / 3.0 works well, but i need a
> workstation and my server ,o)
>
> Ok sorry for the wonderful english ,o)

No apologies necessary; none of us are born speaking it, and many of us don't
grow up speaking it either.

> mfg. Sebastian Rother ,o)

--
Scott Francis darkuncle@ [home:] d a r k u n c l e . n e t
Systems/Network Manager sfrancis@ [work:] t o n o s . c o m
GPG public key 0xCB33CCA7 illum oportet crescere me autem minui

[demime 0.98d removed an attachment of type application/pgp-signature]