freebsd-usb Digest, Vol 268, Issue 1
freebsd-u...@freebsd.org
freeb...@freebsd.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
or, via email, send a message with subject or body 'help' to
freebsd-u...@freebsd.org
You can reach the person managing the list at
freebsd-...@freebsd.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of freebsd-usb digest..."
Today's Topics:
1. patch: ndisusb: show device description on attach (Paul B Mahol)
2. Re: USB serial device naming (Trevor Blackwell)
3. Re: usb/140951: [uftdi] [patch] Add support for FT2232D Dual
USB UART/FIFO I.C. (lin...@FreeBSD.org)
4. Re: usb/140951: [uftdi] [patch] Add support for FT2232D Dual
USB UART/FIFO I.C. (lin...@FreeBSD.org)
5. Re: usb/140923: [axe] [patch] [usb8] Add support for new rev
of USB Ethernet chip (lin...@FreeBSD.org)
6. Re: usb/140325: [libusb] Missing/incorrect initialisation and
memory leak in libusb10/libusb20 (lin...@FreeBSD.org)
7. Re: usb/140242: [ehci] dev/usb/controller/ehci_ix4xx.c
shortcomings (lin...@FreeBSD.org)
8. Re: usb/139990: [panic] [patch] [usb67] Kernel frequently
panics after printing (lin...@FreeBSD.org)
9. Re: usb/139598: [umass] [usb8] CAM reports "xptioctl: put
"device pass" in your kernel config file" even when already
present (lin...@FreeBSD.org)
10. Re: usb/138904: [rum] [panic] [usb67] unpluging USB wifi card
panics system (lin...@FreeBSD.org)
11. Re: usb/138879: [uftdi] [patch] Patch to add support for CTI
USB-Mini 485 and USB-Nano 485 (lin...@FreeBSD.org)
12. Re: usb/138675: [usb8] [panic] page fault, perhaps in USB
(lin...@FreeBSD.org)
13. Re: usb/138389: [usb8] [patch] NULL pointer dereference in
usb_endpoint_foreach() in file sys/dev/usb/usb_device.c
(lin...@FreeBSD.org)
14. Re: USB serial device naming (Ed Schouten)
15. Re: USB serial device naming (Hans Petter Selasky)
16. Re: USB serial device naming (Hans Petter Selasky)
17. Re: patch: ndisusb: show device description on attach
(Hans Petter Selasky)
18. Re: USB serial device naming (Ed Schouten)
19. Re: USB serial device naming (Hans Petter Selasky)
20. Current problem reports assigned to freeb...@FreeBSD.org
(FreeBSD bugmaster)
21. Re: USB serial device naming (Trevor Blackwell)
22. 7.2-stable #3 seems significantly less stable. (Steve Franks)
23. Re: USB serial device naming (Hans Petter Selasky)
24. usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial
converter) is not working on -current (YAMA...@FreeBSD.org)
25. Re-enumerating a device (Daniel O'Connor)
26. Re: usb/141474: [boot] FreeBSD 8.0 can not install from USB
CDROM drive (lin...@FreeBSD.org)
27. Re: usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial
converter) is not working on -current (Hans Petter Selasky)
28. Re: Re-enumerating a device (Hans Petter Selasky)
29. Re: usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial
converter) is not working on -current (Hans Petter Selasky)
30. Re: usb/141474: [boot] FreeBSD 8.0 can not install from USB
CDROM drive (Hans Petter Selasky)
31. 5.1-channel USB sound device on 8.0-RELEASE
(MIHIRA Sanpei Yoshiro)
32. Re: Problem with 2.5" USB drive (Spil Oss)
----------------------------------------------------------------------
Message: 1
Date: Sat, 12 Dec 2009 13:18:53 +0100
From: Paul B Mahol <one...@gmail.com>
Subject: patch: ndisusb: show device description on attach
To: freeb...@freebsd.org, freeb...@freebsd.org
Message-ID:
<3a142e750912120418h2e5...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
--- /sys/dev/if_ndis/if_ndis_usb.c 2009-11-25 21:49:03.000000000 +0000
+++ if_ndis_usb.c 2009-12-12 12:17:27.000000000 +0000
@@ -165,6 +165,7 @@
driver_object *drv;
int devidx = 0;
+ device_set_usb_desc(self);
db = uaa->driver_ivar;
sc = (struct ndis_softc *)dummy;
sc->ndis_dev = self;
--
Paul B Mahol
------------------------------
Message: 2
Date: Sun, 13 Dec 2009 14:45:07 -0800
From: Trevor Blackwell <t...@tlb.org>
Subject: Re: USB serial device naming
To: e...@freebsd.org
Cc: freeb...@freebsd.org
Message-ID: <C56E01C7-B772-43F9...@tlb.org>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
I can't seem to find a way to match USB serial ports & tty names. I
have two serial USB devices, which I can distinguish easily from
"usbconfig show_ifdrv"
ugen2.2: <URG-Series USB Driver Hokuyo Data Flex for USB> at usbus2,
cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen2.2.0: umodem0: <Hokuyo Data Flex for USB URG-Series USB Driver,
class 2/0, rev 2.00/1.00, addr 2>
ugen2.3: <USB-Serial Controller Prolific Technology Inc.> at usbus2,
cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen2.3.0: uplcom0: <Prolific Technology Inc. USB-Serial Controller,
class 0/0, rev 1.10/3.00, addr 3>
and they result in two ttys:
/dev/cuaU0
/dev/cuaU1
but I can't figure out how to map the USB devices to tty names. It
depends on what order they come up in. They're assigned sequentially
by a bitmap system in usb_serial.c
How can my code figure this out? I think what I want is some sort of
ioctl on the raw USB device or usbconfig option to tell me what tty it
appears as.
--
Trevor Blackwell 650 776 7870 t...@tlb.org
------------------------------
Message: 3
Date: Mon, 14 Dec 2009 02:41:03 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/140951: [uftdi] [patch] Add support for FT2232D Dual
USB UART/FIFO I.C.
To: rom...@blogreen.org, lin...@FreeBSD.org, freeb...@FreeBSD.org
Message-ID: <200912140241....@freefall.freebsd.org>
Synopsis: [uftdi] [patch] Add support for FT2232D Dual USB UART/FIFO I.C.
State-Changed-From-To: open->closed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:40:13 UTC 2009
State-Changed-Why:
Patch committed to 8; cannot be merged to -7.
http://www.freebsd.org/cgi/query-pr.cgi?pr=140951
------------------------------
Message: 4
Date: Mon, 14 Dec 2009 02:42:53 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/140951: [uftdi] [patch] Add support for FT2232D Dual
USB UART/FIFO I.C.
To: rom...@blogreen.org, lin...@FreeBSD.org, freeb...@FreeBSD.org,
tho...@FreeBSD.org
Message-ID: <200912140242....@freefall.freebsd.org>
Synopsis: [uftdi] [patch] Add support for FT2232D Dual USB UART/FIFO I.C.
State-Changed-From-To: closed->patched
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:41:07 UTC 2009
State-Changed-Why:
grr, my mistake, in -9 but needs MFC to 8.
Responsible-Changed-From-To: freebsd-usb->thompsa
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Dec 14 02:41:07 UTC 2009
Responsible-Changed-Why:
http://www.freebsd.org/cgi/query-pr.cgi?pr=140951
------------------------------
Message: 5
Date: Mon, 14 Dec 2009 02:44:27 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/140923: [axe] [patch] [usb8] Add support for new rev
of USB Ethernet chip
To: freeb...@brettglass.com, lin...@FreeBSD.org,
freeb...@FreeBSD.org, tho...@FreeBSD.org
Message-ID: <200912140244....@freefall.freebsd.org>
Old Synopsis: [axe] [patch] Add support for new rev of USB Ethernet chip
New Synopsis: [axe] [patch] [usb8] Add support for new rev of USB Ethernet chip
State-Changed-From-To: open->patched
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:43:47 UTC 2009
State-Changed-Why:
set as MFC reminder.
Responsible-Changed-From-To: freebsd-usb->thompsa
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Dec 14 02:43:47 UTC 2009
Responsible-Changed-Why:
http://www.freebsd.org/cgi/query-pr.cgi?pr=140923
------------------------------
Message: 6
Date: Mon, 14 Dec 2009 02:50:59 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/140325: [libusb] Missing/incorrect initialisation and
memory leak in libusb10/libusb20
To: robert...@hotmail.com, lin...@FreeBSD.org,
freeb...@FreeBSD.org, tho...@FreeBSD.org
Message-ID: <200912140250....@freefall.freebsd.org>
Old Synopsis: Missing/incorrect initialisation and memory leak in libusb10/libusb20
New Synopsis: [libusb] Missing/incorrect initialisation and memory leak in libusb10/libusb20
State-Changed-From-To: open->patched
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:48:20 UTC 2009
State-Changed-Why:
set as MFC reminder.
Responsible-Changed-From-To: freebsd-usb->thompsa
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Dec 14 02:48:20 UTC 2009
Responsible-Changed-Why:
http://www.freebsd.org/cgi/query-pr.cgi?pr=140325
------------------------------
Message: 7
Date: Mon, 14 Dec 2009 02:53:28 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/140242: [ehci] dev/usb/controller/ehci_ix4xx.c
shortcomings
To: sebasti...@embedded-brains.de, lin...@FreeBSD.org,
freeb...@FreeBSD.org, tho...@FreeBSD.org
Message-ID: <200912140253....@freefall.freebsd.org>
Old Synopsis: dev/usb/controller/ehci_ix4xx.c shortcomings
New Synopsis: [ehci] dev/usb/controller/ehci_ix4xx.c shortcomings
State-Changed-From-To: open->closed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:52:26 UTC 2009
State-Changed-Why:
Committed to head and MFCed to 8.
Responsible-Changed-From-To: freebsd-usb->thompsa
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Dec 14 02:52:26 UTC 2009
Responsible-Changed-Why:
http://www.freebsd.org/cgi/query-pr.cgi?pr=140242
------------------------------
Message: 8
Date: Mon, 14 Dec 2009 02:56:37 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/139990: [panic] [patch] [usb67] Kernel frequently
panics after printing
To: dal...@solfertje.student.utwente.nl, lin...@FreeBSD.org,
freeb...@FreeBSD.org
Message-ID: <200912140256....@freefall.freebsd.org>
Old Synopsis: [panic] Kernel frequently panics after printing
New Synopsis: [panic] [patch] [usb67] Kernel frequently panics after printing
State-Changed-From-To: open->analyzed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:55:42 UTC 2009
State-Changed-Why:
A patch has been contributed which apparently fixes the problem. Waiting
for a committer interested in working on the older USB drivers.
http://www.freebsd.org/cgi/query-pr.cgi?pr=139990
------------------------------
Message: 9
Date: Mon, 14 Dec 2009 02:57:30 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/139598: [umass] [usb8] CAM reports "xptioctl: put
"device pass" in your kernel config file" even when already present
To: wbl...@wonkity.com, lin...@FreeBSD.org, freeb...@FreeBSD.org
Message-ID: <200912140257....@freefall.freebsd.org>
Old Synopsis: [umass] CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present
New Synopsis: [umass] [usb8] CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present
State-Changed-From-To: open->analyzed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 02:56:52 UTC 2009
State-Changed-Why:
A workaround is included in the Audit-Trail.
http://www.freebsd.org/cgi/query-pr.cgi?pr=139598
------------------------------
Message: 10
Date: Mon, 14 Dec 2009 03:00:45 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/138904: [rum] [panic] [usb67] unpluging USB wifi card
panics system
To: h...@sendmail.cz, lin...@FreeBSD.org, freeb...@FreeBSD.org
Message-ID: <200912140300....@freefall.freebsd.org>
Old Synopsis: [rum] unpluging USB wifi card panics system
New Synopsis: [rum] [panic] [usb67] unpluging USB wifi card panics system
State-Changed-From-To: open->analyzed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 03:00:03 UTC 2009
State-Changed-Why:
Apparently this only applies to the older USB stack.
http://www.freebsd.org/cgi/query-pr.cgi?pr=138904
------------------------------
Message: 11
Date: Mon, 14 Dec 2009 03:20:17 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/138879: [uftdi] [patch] Patch to add support for CTI
USB-Mini 485 and USB-Nano 485
To: ard...@yahoo.it, lin...@FreeBSD.org, freeb...@FreeBSD.org
Message-ID: <200912140320....@freefall.freebsd.org>
Synopsis: [uftdi] [patch] Patch to add support for CTI USB-Mini 485 and USB-Nano 485
State-Changed-From-To: open->analyzed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 03:19:22 UTC 2009
State-Changed-Why:
patch committed to P4, awaiting commit to 9-CURRENT and 8-STABLE.
http://www.freebsd.org/cgi/query-pr.cgi?pr=138879
------------------------------
Message: 12
Date: Mon, 14 Dec 2009 03:21:38 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/138675: [usb8] [panic] page fault, perhaps in USB
To: jha...@pangolin-systems.com, lin...@FreeBSD.org,
freeb...@FreeBSD.org, lin...@FreeBSD.org
Message-ID: <200912140321....@freefall.freebsd.org>
Synopsis: [usb8] [panic] page fault, perhaps in USB
State-Changed-From-To: open->feedback
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 03:21:03 UTC 2009
State-Changed-Why:
To submitter: can you confirm that this issue is fixed in -CURRENT?
Responsible-Changed-From-To: freebsd-usb->linimon
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Dec 14 03:21:03 UTC 2009
Responsible-Changed-Why:
http://www.freebsd.org/cgi/query-pr.cgi?pr=138675
------------------------------
Message: 13
Date: Mon, 14 Dec 2009 03:24:15 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/138389: [usb8] [patch] NULL pointer dereference in
usb_endpoint_foreach() in file sys/dev/usb/usb_device.c
To: ar...@census-labs.com, lin...@FreeBSD.org,
freeb...@FreeBSD.org, tho...@FreeBSD.org
Message-ID: <200912140324....@freefall.freebsd.org>
Synopsis: [usb8] [patch] NULL pointer dereference in usb_endpoint_foreach() in file sys/dev/usb/usb_device.c
State-Changed-From-To: open->closed
State-Changed-By: linimon
State-Changed-When: Mon Dec 14 03:23:38 UTC 2009
State-Changed-Why:
Committed to -CURRENT and MFCed to 8.
Responsible-Changed-From-To: freebsd-usb->thompsa
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Dec 14 03:23:38 UTC 2009
Responsible-Changed-Why:
http://www.freebsd.org/cgi/query-pr.cgi?pr=138389
------------------------------
Message: 14
Date: Mon, 14 Dec 2009 08:42:04 +0100
From: Ed Schouten <e...@80386.nl>
Subject: Re: USB serial device naming
To: Trevor Blackwell <t...@tlb.org>
Cc: freeb...@freebsd.org
Message-ID: <20091214074...@hoeg.nl>
Content-Type: text/plain; charset="us-ascii"
Hello Trevor,
* Trevor Blackwell <t...@tlb.org> wrote:
> I can't seem to find a way to match USB serial ports & tty names. I
> have two serial USB devices, which I can distinguish easily from
> "usbconfig show_ifdrv"
>
> <snip>
>
> and they result in two ttys:
> /dev/cuaU0
> /dev/cuaU1
Be sure to keep in mind: the `real' TTY devices are ttyU0 and ttyU1. The
cua* devices are callout devices, which unlike the tty* devices don't
wait for a carrier detect signal during open().
My opinion is that the USB serial driver shouldn't use a bitmask to keep
track of which unit number are available, because we've got a nice KPI
for that:
http://www.freebsd.org/cgi/man.cgi?query=new_unrhdr
Unfortunately I cannot answer your question. Hopefully Hans can. ;-)
Cheers,
--
Ed Schouten <e...@80386.nl>
WWW: http://80386.nl/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20091214/cbf50fcf/attachment-0001.pgp
------------------------------
Message: 15
Date: Mon, 14 Dec 2009 09:43:36 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: USB serial device naming
To: Trevor Blackwell <t...@tlb.org>
Cc: e...@freebsd.org, freeb...@freebsd.org
Message-ID: <200912140943....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-1"
On Sunday 13 December 2009 23:45:07 Trevor Blackwell wrote:
> I can't figure out how to map the USB devices to tty names.
I think this is not possible at the moment. And there is no TTY API to pass
this information. Please provide a patch.
--HPS
------------------------------
Message: 16
Date: Mon, 14 Dec 2009 09:48:07 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: USB serial device naming
To: Ed Schouten <e...@80386.nl>
Cc: freeb...@freebsd.org
Message-ID: <200912140948....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"
On Monday 14 December 2009 08:42:04 Ed Schouten wrote:
> Hello Trevor,
>
> * Trevor Blackwell <t...@tlb.org> wrote:
> > I can't seem to find a way to match USB serial ports & tty names. I
> > have two serial USB devices, which I can distinguish easily from
> > "usbconfig show_ifdrv"
> >
> > <snip>
> >
> > and they result in two ttys:
> > /dev/cuaU0
> > /dev/cuaU1
>
> Be sure to keep in mind: the `real' TTY devices are ttyU0 and ttyU1. The
> cua* devices are callout devices, which unlike the tty* devices don't
> wait for a carrier detect signal during open().
>
> My opinion is that the USB serial driver shouldn't use a bitmask to keep
> track of which unit number are available, because we've got a nice KPI
> for that:
>
> http://www.freebsd.org/cgi/man.cgi?query=new_unrhdr
>
> Unfortunately I cannot answer your question. Hopefully Hans can. ;-)
That's OK, but the real problem is that TTY is not a visible child of UPLCOM
for example. I would suggest adding a new IOCTL or maybe you have a better
idea, where we can pass the "device_get_nameunit()" string, and then TTY can
store it and pass it to userland.
Also TTY should have a printout in dmesg, which unit is create if this string
is specified.
--HPS
------------------------------
Message: 17
Date: Mon, 14 Dec 2009 09:50:33 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: patch: ndisusb: show device description on attach
To: freeb...@freebsd.org
Cc: freeb...@freebsd.org
Message-ID: <200912140950....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-1"
On Saturday 12 December 2009 13:18:53 Paul B Mahol wrote:
> --- /sys/dev/if_ndis/if_ndis_usb.c 2009-11-25 21:49:03.000000000 +0000
> +++ if_ndis_usb.c 2009-12-12 12:17:27.000000000 +0000
> @@ -165,6 +165,7 @@
> driver_object *drv;
> int devidx = 0;
>
> + device_set_usb_desc(self);
> db = uaa->driver_ivar;
> sc = (struct ndis_softc *)dummy;
> sc->ndis_dev = self;
The patch looks good. Just commit it!
--HPS
------------------------------
Message: 18
Date: Mon, 14 Dec 2009 09:53:51 +0100
From: Ed Schouten <e...@80386.nl>
Subject: Re: USB serial device naming
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freeb...@freebsd.org
Message-ID: <20091214085...@hoeg.nl>
Content-Type: text/plain; charset="us-ascii"
* Hans Petter Selasky <hsel...@c2i.net> wrote:
> Also TTY should have a printout in dmesg, which unit is create if this
> string is specified.
Just patch your ucom driver to print that information. It doesn't belong
in the TTY layer. Can't you just extend usbconfig to also dump that
information?
--
Ed Schouten <e...@80386.nl>
WWW: http://80386.nl/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20091214/a0445ff4/attachment-0001.pgp
------------------------------
Message: 19
Date: Mon, 14 Dec 2009 10:06:00 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: USB serial device naming
To: Ed Schouten <e...@80386.nl>
Cc: freeb...@freebsd.org
Message-ID: <200912141006....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"
On Monday 14 December 2009 09:53:51 Ed Schouten wrote:
> * Hans Petter Selasky <hsel...@c2i.net> wrote:
> > Also TTY should have a printout in dmesg, which unit is create if this
> > string is specified.
>
> Just patch your ucom driver to print that information. It doesn't belong
> in the TTY layer. Can't you just extend usbconfig to also dump that
> information?
Hi,
A printout in USB is OK for the user, but what about applications?
Probably I could extend with an USB IOCTL for the TTY device to do what I
want, in addition to a printout.
USB_IOCTL_GET_PARENT_NAME
--HPS
------------------------------
Message: 20
Date: Mon, 14 Dec 2009 11:07:05 GMT
From: FreeBSD bugmaster <bugm...@FreeBSD.org>
Subject: Current problem reports assigned to freeb...@FreeBSD.org
To: freeb...@FreeBSD.org
Message-ID: <200912141107....@freefall.freebsd.org>
Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).
The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.
S Tracker Resp. Description
--------------------------------------------------------------------------------
o usb/141327 usb [ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM
o usb/141313 usb [usb8] nvidia USB 2.0 controller - stops copying on US
o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER
o usb/140928 usb [u3g] [usb8] [patch] ZTE CDMA2000 1X EV-DO (MG478/AC87
o usb/140920 usb [install] USB based install fails on 8.0-RELEASE [regr
o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b
f usb/140883 usb [axe] [usb8] USB gigabit ethernet hangs after short pe
o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0-
a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl
f usb/140714 usb [hang] [usb8] system freeze when disconect my flash us
o kern/140614 usb [uplcom] [patch] adding support for Radio Shack Gigwar
o usb/140590 usb [bluetooth] [usb8] ng_ubt(4) ng_l2cap_process_cmd_rej
o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d
o usb/140259 usb [libusb] [patch] [usb8] libusb-1.0 portability/compati
o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US
o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A
a usb/139990 usb [panic] [patch] [usb67] Kernel frequently panics after
a usb/139598 usb [umass] [usb8] CAM reports "xptioctl: put "device pass
o usb/139243 usb [uhci] [usb67] unplug prolific USB serial -> uhci_abor
o usb/139142 usb [ehci] [usb8] [patch] ehci drivers (NVIDIA nForce4 USB
o usb/138915 usb [patch] [usb8] [usb67] add support for SheevaPlug seri
a usb/138904 usb [rum] [panic] [usb67] unpluging USB wifi card panics s
f usb/138882 usb [ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t
a usb/138879 usb [uftdi] [patch] Patch to add support for CTI USB-Mini
o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv
o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT
o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit
o usb/138172 usb [u3g] [patch] [usb67] Additional dev id for u3g (Optio
o usb/138138 usb [u3g] [patch] [usb67] Novatel U760 for u3g (Verizon an
o usb/138124 usb [usbaudio] [usb8] Axed uaudio functionality in the usb
o usb/138119 usb [usb67] [usb8] MultiBay CDROM (probably on USB bus) is
o usb/137872 usb [usb67] [boot] slow booting on usb flash drive
f usb/137848 usb [panic] [usb67] Page fault when using an USB bluetooth
o usb/137806 usb [ukbd] [usb67] USB keyboard doesn't work until it's un
o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no
o usb/137616 usb [usb67][usb8][usbdevs] [patch]: usbdevs update: Please
o usb/137377 usb [usb8] Support for Huawei E180
o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro
p usb/137226 usb [usb67][patch] quirk for Philips extern USB disk
o usb/137190 usb [usb8][patch] inhibit spurious button releases for som
o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo
p usb/137188 usb [usb8][patch] correctly handle USB report descriptors
o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att
p usb/136761 usb [usbdevs][usb67][patch] Teach usbdevs / u3g(4) about H
o usb/135938 usb [aue] [usb67] aue driver only passes traffic in promis
f usb/135857 usb [urtw] [usb67] RTL8187 Wireless Adapter
o usb/135575 usb [usbdevs] [patch] [usb67] Add HTC Wizard phone vid/pid
o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa
p usb/135372 usb [usb67][umass] Quirk report for Teclast TL-C300 usb me
o usb/135348 usb [umass] USB Drive Hangs with ZFS (JMicron USB2/eSata)
o usb/135206 usb machine reboots when inserted USB device
o usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu
o usb/135182 usb UMASS quirk - Olympus FE20 camera
o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible
o usb/134633 usb Add support for WILLCOM03(SHARP smart phone)
o usb/134631 usb [usbdevs] [patch] WiSPY DBx support requires usb tweak
o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g
o usb/134193 usb System freeze on usb MP3 player insertion
o usb/134117 usb [Patch] Add support for 'Option GlobeTrotter HSDPA Mod
o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive
o usb/133989 usb [newusb] [ukbd] USB keyboard dead at mountroot> prompt
o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa
o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache
o usb/133296 usb [rum] driver not working properly in hostap mode
p usb/132799 usb [usb][patch]GENESYS USB2IDE requires NO_SYNCHRONIZE_CA
o usb/132785 usb [usb] [patch] Gemtech remote powersocket is classed as
o usb/132594 usb USB subsystem causes page fault and crashes
o usb/132312 usb Xorg 7.4 halts USB controller
o usb/132080 usb [patch] [usb] [rum] Kernel panic after NOMEM caused by
o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760
o usb/132036 usb [panic] page fault when connecting Olympus C740 camera
o usb/131912 usb [uslcom] [patch] New devices using Silicon Labs chips
o usb/131900 usb [usbdevs] [patch] Additional product identification co
o usb/131583 usb [umass] Failure when detaching umass Device
o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data
o usb/131521 usb Registering Belkin UPS to usb_quirks.c
o usb/131123 usb [patch] re-add UQ_ASSUME_CM_OVER_DATA USB quirk
o usb/131074 usb no run-time detection of usb devices plugged into exte
o usb/130736 usb Page fault unplugging USB stick
o usb/130230 usb Samsung Electronics YP-U3 does not attach in 7.1-RELEA
o usb/130208 usb Boot process severely hampered by umass0 error
o usb/130122 usb [newusb] DVD drive detects as 'da' device
o usb/129945 usb [usbdevs] [patch] add u3g support for Longcheer WM66 U
o usb/129766 usb [usb] plugging in usb modem HUAWEI E226 panics system
o usb/129758 usb [uftdi] [patch] add Pyramid LCD usb support
o usb/129673 usb [uhci] uhci (uhub) confused on replugging USB 1.1 scan
o usb/129522 usb [ubsa] [patch] add support for ZTE AC8700 modem
o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis
o usb/129311 usb [usb] [panic] Instant crash with an USB card reader
o usb/129251 usb [usbdevs] [patch] Liebert UPS being assigned uhid and
o usb/129173 usb [uplcom] [patch] Add support for Corega CG-USBRS232R a
s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa
o usb/128977 usb [usb] [patch] uaudio is not full duplex
o usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2
o usb/128485 usb [umodem] [patch] Nokia N80 modem support
o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive
o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like
o usb/128324 usb [uplcom] [patch] remove baud rate restriction for PL23
o usb/127980 usb [umass] [patch] Fix Samsung YP U2 MP3 player on 7.x an
o usb/127926 usb [boot] USB Timeout during bootup
p usb/127549 usb [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requi
s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should
o usb/127423 usb [boot] BTX halted on Gigabyte GA-MA69VM-S2 / AMD Sempr
o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support
o usb/127248 usb [ucom] panic while uplcom devices attaach and detach
o usb/127222 usb [ohci] Regression in 7.0 usb storage generic driver
o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c
o usb/126848 usb [usb]: USB Keyboard hangs during Installation
o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be
o usb/126519 usb [usb] [panic] panic when plugging in an iphone
o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device
o usb/125736 usb [ukbd] [hang] system hangs after AT keyboard detect if
o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite
o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d
o usb/125450 usb [panic] Removing USB flash card while being accessed c
o usb/125238 usb [ums] Habu Mouse turns off in X
o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U
o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi
o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe
o usb/124758 usb [rum] [panic] rum panics SMP kernel
o usb/124708 usb [panic] Kernel panic on USB KVM reattach
o usb/124604 usb [ums] Microsoft combo wireless mouse doesn't work
o kern/124130 usb [usb] gmirror fails to start usb devices that were pre
o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile
o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with
o usb/123691 usb usbd(8): usbd hangs
o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l
o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U
o usb/123509 usb [umass] continuous reset Samsung SGH-G600 phone
o usb/123352 usb [usbdevs] [patch] Add Option GTMAX3.6/7.2 and Quallcom
o usb/123351 usb [usbdevs] [patch] Add Reiner SCT cyberJack, Omnikey [2
o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um
o usb/122956 usb [ubsa] [patch] add support for Novatel Wireless XU870
o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt
o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa
o usb/122819 usb [usb] [patch] Patch to provide dynamic additions to th
o usb/122813 usb [udbp] [request] udbp driver should be removed in favo
o usb/122621 usb [new driver] [patch] New driver for Sierra Wireless 3G
o usb/122547 usb [ehci] USB Printer not being recognized after reboot
o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci
o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE
o usb/122119 usb [umass] umass device causes creation of daX but not da
o usb/122025 usb [uscanner] [patch] uscanner does not attach to Epson R
o usb/121755 usb [ohci] [patch] Fix panic after ohci/uhub cardbus devic
o usb/121734 usb [ugen] ugen HP1022 printer device not working since up
o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k
o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard
o usb/121426 usb [patch] [uscanner] add HP ScanJet 3570C
o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s
o usb/121232 usb [usb] [panic] USB CardBus card removal causes reboot s
p usb/121184 usb [uipaq] [patch] add ids from linux ipaq driver (plus a
o usb/121169 usb [umass] Issues with usb mp3 player
o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS
o usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det
o usb/120729 usb [panic] fault while in kernel mode with connecting USB
o usb/120572 usb [umass] [patch] quirk to support ASUS P535 as umass (a
o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo
o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou
o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5
o usb/119981 usb [axe] [patch] add support for LOGITEC LAN-GTJ/U2 gigab
o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou
o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch
o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression]
o usb/119513 usb [irq] inserting dlink dwl-g630 wireless card results i
o usb/119509 usb [usb] USB flaky on Dell Optiplex 755
o usb/119481 usb [hang] FreeBSD not responding after connecting USB-Mas
o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress
o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun
o usb/119201 usb [cam] [patch] Quirks for Olympus FE-210 camera, LG and
o usb/118485 usb [usbdevs] [patch] Logitech Headset Workaround
o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer
o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se
o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread
o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi
o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin
o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS
o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE
o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS
o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work
o usb/117893 usb [umass] Lacie USB DVD writing failing
o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory
o usb/117598 usb [uaudio] [patch] Not possible to record with Plantroni
o usb/117313 usb [umass] [panic] panic on usb camera insertion
o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach
o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a
o usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th
o usb/116699 usb [usbhid] USB HID devices do not initialize at system b
o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee
o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300
o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches
o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter
o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI
o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel
o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui
o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco
o usb/114682 usb [umass] generic USB media-card reader unusable
o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker
o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection
o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff
o usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in
o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated
s usb/108344 usb [usb67] [atausb] [panic] kernel with atausb panics whe
o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found
o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device
o usb/107243 usb [usb67] [cam] [quirk] [patch] Apacer USB Flash Drive q
o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu
o usb/105361 usb [usb67] [panic] Kernel panic during unmounting mass st
s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never
o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil
o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele
o usb/101775 usb [usb67] [usb8] [libusbhid] [patch] possible error in r
o usb/101761 usb [usb67] [patch] [request] usb.h: increase maximal size
o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar
o usb/99538 usb [keyboard] while using USB keyboard default params of
o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar
o kern/99200 usb [bluetooth] SMP-Kernel crashes reliably when Bluetooth
o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3
o usb/97472 usb [cam] [patch] add support for Olympus C150,D390
s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2.
o usb/97175 usb [umass] [hang] USB cardreader hangs system
o usb/96457 usb [umass] [panic] fatback on umass = reboot
o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram
o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync
s usb/96120 usb [ums] [request] USB mouse not always detected
s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620
o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb
s usb/95348 usb [keyboard] USB keyboard unplug causes noise on screen
o usb/95037 usb [umass] USB disk not recognized on hot-plug.
o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk
o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI
o usb/94384 usb [panic] kernel panic with usb2 hardware
o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB
o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion
o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work
o usb/93155 usb [ulpt] /dev/ulpt0: device busy, USB printer does not w
o usb/92852 usb [ums] [patch] Vertical scroll not working properly on
o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS
o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb
o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE
o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand
o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg
o usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n
o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return "
o usb/91629 usb [usb] usbd_abort_pipe() may result in infinite loop
o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work
o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500
o usb/91283 usb [boot] [regression] booting very slow with usb devices
o usb/91238 usb [umass] USB tape unit fails to write a second tape fil
o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas
o usb/89954 usb [umass] [panic] USB Disk driver race condition?
s usb/89003 usb [request] LaCie Firewire drive not properly supported
o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg
o usb/88408 usb [axe] axe0 read PHY failed
o usb/87648 usb [mouse] Logitech USB-optical mouse problem.
o usb/87224 usb [usb] Cannot mount USB Zip750
o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the
o usb/86298 usb [mouse] Known good USB mouse won't work with correct s
s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device
f usb/84750 usb [hang] 6-BETA2 reboot/shutdown with root_fs on externa
s usb/84336 usb [usb] [reboot] instant system reboot when unmounting a
o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN
o usb/83863 usb [ugen] Communication problem between opensc/openct via
o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe
o usb/83563 usb [umass] [panic] Page Fault while detaching Mpman Usb d
o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent
o usb/82660 usb [ehci] [panic] EHCI: I/O stuck in state 'physrd'/panic
s usb/82569 usb [umass] [panic] USB mass storage plug/unplug causes sy
o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected
o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack
o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci
o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55.
o usb/80862 usb [patch] USB locking issues: missing some Giant calls
o usb/80854 usb [patch] [request] suggestion for new iface-no-probe me
o usb/80829 usb [modules] [panic] possible panic when loading USB-modu
s usb/80777 usb [request] usb_rem_task() should wait for callback to c
s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_
o usb/80774 usb [patch] have "usbd_find_desc" in line with the other "
o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails
o usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze
o usb/79723 usb [usb] [request] prepare for high speed isochronous tra
o usb/79722 usb [ehci] wrong alignments in ehci.h
a usb/79656 usb [ehci] RHSC interrupts lost
o usb/79524 usb [ulpt] printing to Minolta PagePro 1[23]xxW via USB fa
o usb/79287 usb [uhci] [hang] UHCI hang after interrupt transfer
o usb/79269 usb [ohci] USB ohci da0 plug/unplug causes crashes and loc
o usb/78984 usb [umass] [patch] Creative MUVO umass failure
o usb/77294 usb [ucom] [panic] ucom + ulpcom panic
o usb/77184 usb [umass] [panic] kernel panic on USB device disconnect,
o usb/76732 usb [ums] Mouse problems with USB KVM Switch
o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device
o usb/76461 usb [umass] disklabel of umass(4)-CAM(4)-da(4) not used by
o usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0
s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade
o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn
o usb/75797 usb [sound] [regression] 5.3-STABLE(2005 1/4) detect USB h
o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for
o usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace)
o usb/74771 usb [umass] [hang] mounting write-protected umass device a
s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL
o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R
o usb/73307 usb [panic] Kernel panics on USB disconnect
s usb/72733 usb [ucom] [request] Kyocera 7135 Palm OS connection probl
o usb/71455 usb [umass] Slow USB umass performance of 5.3
o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati
o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n
o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1
o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes
o usb/70523 usb [umct] [patch] umct sending/receiving wrong characters
o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports
o usb/68232 usb [ugen] [patch] ugen(4) isochronous handling correction
o usb/67301 usb [uftdi] [panic] RTS and system panic
o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct
o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes
s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s
o usb/59698 usb [keyboard] [patch] Rework of ukbd HID to AT code trans
s bin/57255 usb [patch] usbd(8) and multi-function devices
s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2
s usb/51958 usb [urio] [patch] update for urio driver
o i386/46371 usb USB controller cannot be initialized on IBM Netfinity
o usb/40948 usb [umass] [request] USB HP CDW8200 does not work
o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem
321 problems total.
------------------------------
Message: 21
Date: Mon, 14 Dec 2009 09:44:01 -0800
From: Trevor Blackwell <t...@tlb.org>
Subject: Re: USB serial device naming
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: Ed Schouten <e...@80386.nl>, freeb...@freebsd.org
Message-ID: <EA0E62B3-52AA-4D46...@tlb.org>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
> USB_IOCTL_GET_PARENT_NAME
That seems like the right approach. Is there only ever one associated
"parent" driver? Are there cases where it should report both a serial
& network interface?
--
Trevor Blackwell 650 776 7870 t...@tlb.org
------------------------------
Message: 22
Date: Mon, 14 Dec 2009 14:45:07 -0700
From: Steve Franks <bahama...@gmail.com>
Subject: 7.2-stable #3 seems significantly less stable.
To: freebsd-usb <freeb...@freebsd.org>
Message-ID:
<539c60b90912141345n70e...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
I have no hard metrics, but having gone from 7.2-release to 7.2-stable
sometime in the last couple weeks has really made my usb experience
quite unpleasant. I now have much trouble with loss of communication
to uslcom devices when closing and reopening them (*not* plugging and
unplugging them). Simply closing and reopening the port causes the
open to freeze about 25% of the time. I seem to have similar problems
with umass devices. I tend to leave evertthing plugged into the same
hub and when it freezes, I unplug the cable from the hub. That caused
a freeze & reboot (I assume there was a panic, although no output on
the screen).
Anyway, like I said, no real chance of debug with it being so
intermittent, just an FYI. Just thought I'd issue a report in case we
just merged head into stable and most people think it's great - I'm
not finding it great at the moment. If I do find a repeatable
sequence of events, I'll send some info.
Best!
Steve
------------------------------
Message: 23
Date: Mon, 14 Dec 2009 22:54:51 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: USB serial device naming
To: Trevor Blackwell <t...@tlb.org>
Cc: Ed Schouten <e...@80386.nl>, freeb...@freebsd.org
Message-ID: <200912142254....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-1"
On Monday 14 December 2009 18:44:01 Trevor Blackwell wrote:
> > USB_IOCTL_GET_PARENT_NAME
>
> That seems like the right approach. Is there only ever one associated
> "parent" driver? Are there cases where it should report both a serial
> & network interface?
That's a good question how to best standardise this. Probably the IOCTL is
useful for other busses too.
--HPS
------------------------------
Message: 24
Date: Tue, 15 Dec 2009 00:51:50 GMT
From: YAMA...@FreeBSD.org, Shigeru <shi...@iij.ad.jp>
Subject: usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial
converter) is not working on -current
To: freebsd-gn...@FreeBSD.org
Message-ID: <200912150051....@www.freebsd.org>
>Number: 141467
>Category: usb
>Synopsis: [uftdi] [patch] RATOC REX-USB60F (usb serial converter) is not working on -current
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Dec 15 01:00:07 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: YAMAMOTO, Shigeru
>Release: FreeBSD 9.0-CURRENT
>Organization:
>Environment:
FreeBSD XXXXXXXX 9.0-CURRENT FreeBSD 9.0-CURRENT #0: Wed Dec 2 11:31:13 JST 2009 root@XXXXXXXXXXX:/usr/src/sys/amd64/compile/GENERIC amd64
>Description:
this problem is same as PR 'usb/115933'.
http://www.freebsd.org/cgi/query-pr.cgi?pr=usb/115933
I modify a patch which is attached to that PR.
I'm currenty using RES-USB60F on my -current environment.
>How-To-Repeat:
>Fix:
use this patch and recompile "uftdi.ko".
Patch attached with submission follows:
Index: sys/dev/usb/usbdevs
===================================================================
RCS file: /share/cvsup/FreeBSD/current/usr/src/sys/dev/usb/usbdevs,v
retrieving revision 1.428
diff -u -r1.428 usbdevs
--- sys/dev/usb/usbdevs 11 Dec 2009 02:44:15 -0000 1.428
+++ sys/dev/usb/usbdevs 11 Dec 2009 06:07:33 -0000
@@ -2135,6 +2135,7 @@
/* RATOC Systems products */
product RATOC REXUSB60 0xb000 REX-USB60
+product RATOC REXUSB60F 0xb020 REX-USB60F
/* Sagem products */
product SAGEM USBSERIAL 0x0027 USB-Serial Controller
Index: sys/dev/usb/serial/uftdi.c
===================================================================
RCS file: /share/cvsup/FreeBSD/current/usr/src/sys/dev/usb/serial/uftdi.c,v
retrieving revision 1.17
diff -u -r1.17 uftdi.c
--- sys/dev/usb/serial/uftdi.c 9 Dec 2009 20:28:33 -0000 1.17
+++ sys/dev/usb/serial/uftdi.c 10 Dec 2009 00:15:38 -0000
@@ -252,6 +252,7 @@
{USB_VPI(USB_VENDOR_BBELECTRONICS, USB_PRODUCT_BBELECTRONICS_USOTL4, UFTDI_TYPE_8U232AM)},
{USB_VPI(USB_VENDOR_MARVELL, USB_PRODUCT_MARVELL_SHEEVAPLUG, UFTDI_TYPE_8U232AM)},
{USB_VPI(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_PCOPRS1, UFTDI_TYPE_8U232AM)},
+ {USB_VPI(USB_VENDOR_RATOC, USB_PRODUCT_RATOC_REXUSB60F, UFTDI_TYPE_8U232AM)},
};
static int
>Release-Note:
>Audit-Trail:
>Unformatted:
------------------------------
Message: 25
Date: Tue, 15 Dec 2009 16:47:46 +1030
From: "Daniel O'Connor" <doco...@gsoft.com.au>
Subject: Re-enumerating a device
To: freeb...@freebsd.org
Message-ID: <200912151647....@gsoft.com.au>
Content-Type: text/plain; charset="utf-8"
[ Please CC me as I'm not on list ]
Hi,
I have an M-Audio MobilePre, it's a USB audio module which works with
snd_uadio, however to get it working I need to load the firwmare (via
DFU).
Unfortunately the only way I can get it to re-enumerate after sending
the firmware is to unplug it enough to disconnect the data lines (but
not power) and then reconnect.
I have tried usbconfig reset, power_off/power_on, set_config and set_alt
but to no avail..
[inchoate 16:46] ~/projects/dfu-util-0.1.snap20090212 >dfu-util -D ~/ma004103.bin -t 256
dfu-util - (C) 2007-2008 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY
Opening USB Device 0x0000:0x0000...
Claiming USB DFU Runtime Interface...
Determining device status: state = dfuIDLE, status = 0
WARNING: Runtime device already in DFU state ?!?
Found Runtime: [0x0763:0x2804] devnum=0, cfg=0, intf=0, alt=0, name="RAM"
Claiming USB DFU Interface...
Setting Alternate Setting ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
Transfer Size = 0x0100
bytes_per_hash=120
Starting download: [##################################################] finished!
state(7) = dfuMANIFEST, status(0) = No error condition is present
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
>From dmesg..
ugen0.2: <Unknown> at usbus0
# Run dfu-util
ugen0.2: <Unknown> at usbus0 (disconnected)
# Cause re-enumeratae
ugen0.2: <M Audio> at usbus0
uaudio0: <MobilePre> on usbus0
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format
uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm1: <USB audio> on uaudio0
--
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
-- Andrew Tanenbaum
GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 188 bytes
Desc: This is a digitally signed message part.
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20091215/24398fbd/attachment-0001.pgp
------------------------------
Message: 26
Date: Tue, 15 Dec 2009 07:36:24 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/141474: [boot] FreeBSD 8.0 can not install from USB
CDROM drive
To: lin...@FreeBSD.org, freebs...@FreeBSD.org,
freeb...@FreeBSD.org
Message-ID: <200912150736....@freefall.freebsd.org>
Old Synopsis: FreeBSD 8.0 can not install from USB CDROM drive
New Synopsis: [boot] FreeBSD 8.0 can not install from USB CDROM drive
Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
Responsible-Changed-By: linimon
Responsible-Changed-When: Tue Dec 15 07:35:51 UTC 2009
Responsible-Changed-Why:
Over to maintainer(s).
http://www.freebsd.org/cgi/query-pr.cgi?pr=141474
------------------------------
Message: 27
Date: Tue, 15 Dec 2009 10:07:22 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial
converter) is not working on -current
To: freeb...@freebsd.org
Cc: freebsd-gn...@freebsd.org, YAMA...@freebsd.org, Shigeru
<shi...@iij.ad.jp>
Message-ID: <200912151007....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"
On Tuesday 15 December 2009 01:51:50 YAMA...@freebsd.org, Shigeru wrote:
> >Number: 141467
> >Category: usb
> >Synopsis: [uftdi] [patch] RATOC REX-USB60F (usb serial converter) is
> > not working on -current Confidential: no
> >Severity: non-critical
> >Priority: low
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Tue Dec 15 01:00:07 UTC 2009
> >Closed-Date:
> >Last-Modified:
> >Originator: YAMAMOTO, Shigeru
> >Release: FreeBSD 9.0-CURRENT
> >Organization:
> >Environment:
>
> FreeBSD XXXXXXXX 9.0-CURRENT FreeBSD 9.0-CURRENT #0: Wed Dec 2 11:31:13
> JST 2009 root@XXXXXXXXXXX:/usr/src/sys/amd64/compile/GENERIC amd64
>
> >Description:
>
> this problem is same as PR 'usb/115933'.
> http://www.freebsd.org/cgi/query-pr.cgi?pr=usb/115933
>
> I modify a patch which is attached to that PR.
>
> I'm currenty using RES-USB60F on my -current environment.
>
> >How-To-Repeat:
> >
> >Fix:
>
> use this patch and recompile "uftdi.ko".
>
>
> Patch attached with submission follows:
>
> Index: sys/dev/usb/usbdevs
> ===================================================================
> RCS file: /share/cvsup/FreeBSD/current/usr/src/sys/dev/usb/usbdevs,v
> retrieving revision 1.428
> diff -u -r1.428 usbdevs
> --- sys/dev/usb/usbdevs 11 Dec 2009 02:44:15 -0000 1.428
> +++ sys/dev/usb/usbdevs 11 Dec 2009 06:07:33 -0000
> @@ -2135,6 +2135,7 @@
>
> /* RATOC Systems products */
> product RATOC REXUSB60 0xb000 REX-USB60
> +product RATOC REXUSB60F 0xb020 REX-USB60F
>
> /* Sagem products */
> product SAGEM USBSERIAL 0x0027 USB-Serial Controller
> Index: sys/dev/usb/serial/uftdi.c
> ===================================================================
> RCS file: /share/cvsup/FreeBSD/current/usr/src/sys/dev/usb/serial/uftdi.c,v
> retrieving revision 1.17
> diff -u -r1.17 uftdi.c
> --- sys/dev/usb/serial/uftdi.c 9 Dec 2009 20:28:33 -0000 1.17
> +++ sys/dev/usb/serial/uftdi.c 10 Dec 2009 00:15:38 -0000
> @@ -252,6 +252,7 @@
> {USB_VPI(USB_VENDOR_BBELECTRONICS, USB_PRODUCT_BBELECTRONICS_USOTL4,
> UFTDI_TYPE_8U232AM)}, {USB_VPI(USB_VENDOR_MARVELL,
> USB_PRODUCT_MARVELL_SHEEVAPLUG, UFTDI_TYPE_8U232AM)},
> {USB_VPI(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_PCOPRS1, UFTDI_TYPE_8U232AM)},
> + {USB_VPI(USB_VENDOR_RATOC, USB_PRODUCT_RATOC_REXUSB60F,
> UFTDI_TYPE_8U232AM)}, };
>
> static int
>
> >Release-Note:
> >Audit-Trail:
> >Unformatted:
>
Committed to USB P4, ID=171783.
--HPS
------------------------------
Message: 28
Date: Tue, 15 Dec 2009 10:08:50 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: Re-enumerating a device
To: freeb...@freebsd.org
Cc: Daniel O'Connor <doco...@gsoft.com.au>
Message-ID: <200912151008....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"
On Tuesday 15 December 2009 07:17:46 Daniel O'Connor wrote:
> [ Please CC me as I'm not on list ]
>
> Hi,
> I have an M-Audio MobilePre, it's a USB audio module which works with
> snd_uadio, however to get it working I need to load the firwmare (via
> DFU).
>
> Unfortunately the only way I can get it to re-enumerate after sending
> the firmware is to unplug it enough to disconnect the data lines (but
> not power) and then reconnect.
>
> I have tried usbconfig reset, power_off/power_on, set_config and set_alt
> but to no avail..
>
> [inchoate 16:46] ~/projects/dfu-util-0.1.snap20090212 >dfu-util -D
> ~/ma004103.bin -t 256 dfu-util - (C) 2007-2008 by OpenMoko Inc.
> This program is Free Software and has ABSOLUTELY NO WARRANTY
>
> Opening USB Device 0x0000:0x0000...
> Claiming USB DFU Runtime Interface...
> Determining device status: state = dfuIDLE, status = 0
> WARNING: Runtime device already in DFU state ?!?
> Found Runtime: [0x0763:0x2804] devnum=0, cfg=0, intf=0, alt=0, name="RAM"
> Claiming USB DFU Interface...
> Setting Alternate Setting ...
> Determining device status: state = dfuIDLE, status = 0
> dfuIDLE, continuing
> Transfer Size = 0x0100
> bytes_per_hash=120
> Starting download: [##################################################]
> finished! state(7) = dfuMANIFEST, status(0) = No error condition is present
> state(2) = dfuIDLE, status(0) = No error condition is present
> Done!
>
> From dmesg..
> ugen0.2: <Unknown> at usbus0
> # Run dfu-util
> ugen0.2: <Unknown> at usbus0 (disconnected)
> # Cause re-enumeratae
> ugen0.2: <M Audio> at usbus0
> uaudio0: <MobilePre> on usbus0
> uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format
> uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format
> uaudio0: No midi sequencer
> pcm1: <USB audio> on uaudio0
Can you show dmesg, when you do:
usbconfig -u 0 -a 2 reset
--HPS
------------------------------
Message: 29
Date: Tue, 15 Dec 2009 09:10:06 GMT
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial
converter) is not working on -current
To: freeb...@FreeBSD.org
Message-ID: <200912150910....@freefall.freebsd.org>
The following reply was made to PR usb/141467; it has been noted by GNATS.
From: Hans Petter Selasky <hsel...@c2i.net>
To: freeb...@freebsd.org
Cc: YAMA...@freebsd.org,
Shigeru <shi...@iij.ad.jp>,
freebsd-gn...@freebsd.org
Subject: Re: usb/141467: [uftdi] [patch] RATOC REX-USB60F (usb serial converter) is not working on -current
Date: Tue, 15 Dec 2009 10:07:22 +0100
On Tuesday 15 December 2009 01:51:50 YAMA...@freebsd.org, Shigeru wrote:
> >Number: 141467
> >Category: usb
> >Synopsis: [uftdi] [patch] RATOC REX-USB60F (usb serial converter) is
> > not working on -current Confidential: no
> >Severity: non-critical
> >Priority: low
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Tue Dec 15 01:00:07 UTC 2009
> >Closed-Date:
> >Last-Modified:
> >Originator: YAMAMOTO, Shigeru
> >Release: FreeBSD 9.0-CURRENT
> >Organization:
> >Environment:
>
> FreeBSD XXXXXXXX 9.0-CURRENT FreeBSD 9.0-CURRENT #0: Wed Dec 2 11:31:13
> JST 2009 root@XXXXXXXXXXX:/usr/src/sys/amd64/compile/GENERIC amd64
>
> >Description:
>
> this problem is same as PR 'usb/115933'.
> http://www.freebsd.org/cgi/query-pr.cgi?pr=usb/115933
>
> I modify a patch which is attached to that PR.
>
> I'm currenty using RES-USB60F on my -current environment.
>
> >How-To-Repeat:
> >
> >Fix:
>
> use this patch and recompile "uftdi.ko".
>
>
> Patch attached with submission follows:
>
> Index: sys/dev/usb/usbdevs
> ===================================================================
> RCS file: /share/cvsup/FreeBSD/current/usr/src/sys/dev/usb/usbdevs,v
> retrieving revision 1.428
> diff -u -r1.428 usbdevs
> --- sys/dev/usb/usbdevs 11 Dec 2009 02:44:15 -0000 1.428
> +++ sys/dev/usb/usbdevs 11 Dec 2009 06:07:33 -0000
> @@ -2135,6 +2135,7 @@
>
> /* RATOC Systems products */
> product RATOC REXUSB60 0xb000 REX-USB60
> +product RATOC REXUSB60F 0xb020 REX-USB60F
>
> /* Sagem products */
> product SAGEM USBSERIAL 0x0027 USB-Serial Controller
> Index: sys/dev/usb/serial/uftdi.c
> ===================================================================
> RCS file: /share/cvsup/FreeBSD/current/usr/src/sys/dev/usb/serial/uftdi.c,v
> retrieving revision 1.17
> diff -u -r1.17 uftdi.c
> --- sys/dev/usb/serial/uftdi.c 9 Dec 2009 20:28:33 -0000 1.17
> +++ sys/dev/usb/serial/uftdi.c 10 Dec 2009 00:15:38 -0000
> @@ -252,6 +252,7 @@
> {USB_VPI(USB_VENDOR_BBELECTRONICS, USB_PRODUCT_BBELECTRONICS_USOTL4,
> UFTDI_TYPE_8U232AM)}, {USB_VPI(USB_VENDOR_MARVELL,
> USB_PRODUCT_MARVELL_SHEEVAPLUG, UFTDI_TYPE_8U232AM)},
> {USB_VPI(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_PCOPRS1, UFTDI_TYPE_8U232AM)},
> + {USB_VPI(USB_VENDOR_RATOC, USB_PRODUCT_RATOC_REXUSB60F,
> UFTDI_TYPE_8U232AM)}, };
>
> static int
>
> >Release-Note:
> >Audit-Trail:
> >Unformatted:
>
Committed to USB P4, ID=171783.
--HPS
------------------------------
Message: 30
Date: Tue, 15 Dec 2009 10:14:22 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/141474: [boot] FreeBSD 8.0 can not install from USB
CDROM drive
To: freeb...@freebsd.org
Cc: freebs...@freebsd.org
Message-ID: <200912151014....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"
On Tuesday 15 December 2009 08:36:24 lin...@freebsd.org wrote:
> Old Synopsis: FreeBSD 8.0 can not install from USB CDROM drive
> New Synopsis: [boot] FreeBSD 8.0 can not install from USB CDROM drive
>
> Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
> Responsible-Changed-By: linimon
> Responsible-Changed-When: Tue Dec 15 07:35:51 UTC 2009
> Responsible-Changed-Why:
> Over to maintainer(s).
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=141474
> _______________________________________________
> freeb...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb...@freebsd.org"
Hi,
Is the USB CD-ROM detected by the USB stack, and what is the CD-ROM device?
Maybe you simply have to reconfigure sysinstall to use another /dev/cdX for
the installation.
--HPS
------------------------------
Message: 31
Date: Tue, 15 Dec 2009 23:11:27 +0900 (JST)
From: MIHIRA Sanpei Yoshiro <san...@sanpei.org>
Subject: 5.1-channel USB sound device on 8.0-RELEASE
To: freeb...@freebsd.org
Message-ID: <20091215.231127.4757...@sanpei.org>
Content-Type: Text/Plain; charset=us-ascii
Hi.
I tested below device on 8.0-RELEASE with patch.
>*1 Kyo-On DIGI(sorry,this page was writtin in Japanese)
>http://www.area-powers.jp/product/usb_product/product/kyo-on/u1soundt4.html
This device is 5.1-channel USB sound device.
Without patch, ``No playback!''
ugen0.6: <vendor 0x0d8c> at usbus0
uaudio1: <vendor 0x0d8c product 0x0006, class 0/0, rev 1.10/0.10, addr 6> on usbus0
uaudio1: No playback!
uaudio1: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format
uaudio1: No midi sequencer
pcm1: <USB audio> on uaudio1
With patch:
uaudio1: <vendor 0x0d8c product 0x0006, class 0/0, rev 1.10/0.10, addr 6> on usb
us0
uaudio1: Play: 48000 Hz, 8 ch, 16-bit S-LE PCM format
uaudio1: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format
uaudio1: No midi sequencer
pcm1: <USB audio> on uaudio1
But I could not play with mpg123, only noise.
How can I use this device on 8.0-RELEASE.
Cheers.
---
MIHIRA, Sanpei Yoshiro
Tokyo, Japan.
http://freebsd.monkey.org/freebsd-usb/200905/msg00090.html
--- sys/dev/sound/usb/uaudio.c.org 2009-12-07 10:29:05.593175070 +0900
+++ sys/dev/sound/usb/uaudio.c 2009-12-07 10:29:51.030304905 +0900
@@ -112,7 +112,8 @@
#define MAKE_WORD(h,l) (((h) << 8) | (l))
#define BIT_TEST(bm,bno) (((bm)[(bno) / 8] >> (7 - ((bno) % 8))) & 1)
-#define UAUDIO_MAX_CHAN(x) (x)
+#define UAUDIO_MAX_CHAN(x) (((x) < 2) ? (x) : 2) /* XXX fixme later */
+
struct uaudio_mixer_node {
int32_t minval;
------------------------------
Message: 32
Date: Tue, 15 Dec 2009 16:33:12 +0100
From: Spil Oss <spil...@googlemail.com>
Subject: Re: Problem with 2.5" USB drive
To: freeb...@freebsd.org, Hans Petter Selasky <hsel...@c2i.net>
Message-ID:
<5fbf03c20912150733o48f...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Fri, Dec 11, 2009 at 6:17 PM, Spil Oss <spil...@googlemail.com> wrote:
> On Fri, Dec 11, 2009 at 10:37 AM, Hans Petter Selasky <hsel...@c2i.net> wrote:
>> On Thursday 10 December 2009 17:08:53 Spil Oss wrote:
>>> On Thu, Dec 10, 2009 at 10:08 AM, Spil Oss <spil...@googlemail.com> wrote:
>>> > Hello all,
>>> >
>>> > Can't get my 2.5" USB drive to work reliably. The device has a ALI
>>> > M5642 Chip and connects 2.5" PATA disks. Vendor 0x0402 is
>>> > USB_VENDOR_ACERLABS /* Acer Labs */ which ALi is afaik.
>>> >
>>> > When I connect it:
>>> > Dec �8 16:11:20 gw root: Unknown USB device: vendor 0x0402 product
>>> > 0x5642 bus uhub3
>>> > Dec �8 16:11:20 gw kernel: ugen3.2: <vendor 0x0402> at usbus3
>>> > Dec �8 16:11:20 gw kernel: umass0: <vendor 0x0402 USB 2.0 Storage
>>> > Device, class 0/0, rev 2.00/1.00, addr 2> on usbus3
>>> > Dec �8 16:11:20 gw kernel: umass0: �SCSI over Bulk-Only; quirks = 0x0000
>>> > Dec �8 16:11:21 gw kernel: umass0:0:0:-1: Attached to scbus0
>>> > Dec �8 16:11:21 gw kernel: da0 at umass-sim0 bus 0 target 0 lun 0
>>> > Dec �8 16:11:21 gw kernel: da0: <USB 2.0 Storage Device 0100> Fixed
>>> > Direct Access SCSI-0 device
>>> > Dec �8 16:11:21 gw kernel: da0: 40.000MB/s transfers
>>> > Dec �8 16:11:21 gw kernel: da0: 38154MB (78140160 512 byte sectors:
>>> > 255H 63S/T 4864C)
>>> >
>>> > When I try to dd/fdisk/bsdlabel the disk I tend to get
>>> > Dec �9 12:47:49 gw kernel: (da0:umass-sim0:0:0:0): AutoSense Failed
>>> > Sometimes the LED on the cage stays red until I reconnect it.
>>> > When I first `usbconfig -u 3 -a 2 reset` and then reconnect the disk
>>> > it is recognized again. Tried both on an Intel GM855 and a nVidia
>>> > nForce4 system.
>>> >
>>> > Errors that pop up when transferring data:
>>> > Dec �8 16:11:21 gw kernel: (da0:umass-sim0:0:0:0): SYNCHRONIZE
>>> > CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0
>>> > Dec �8 16:11:21 gw kernel: (da0:umass-sim0:0:0:0): UNIT ATTENTION
>>> > asc:28,0 Dec �8 16:11:21 gw kernel: (da0:umass-sim0:0:0:0): Not ready to
>>> > ready change, medium may have changed
>>> >
>>> > Strangely it seems that this device was recognized on a previous
>>> > version of FreeBSD see http://takaq1.plala.jp/freebsd/usb/index.html
>>> > (not that I've tried!) Not quite clear what version of FreeBSD that
>>> > is.
>>> >
>>> > Ultimately FreeBSD crashes when I play around too long..
>>> >
>>> > Can anyone assist?
>>>
>>> Saw on the list that usbconfig dump_device_desc is helpful,
>>> problematic device is ugen3.2:
>>>
>>> ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
>>> pwr=ON
>>>
>>> � bLength = 0x0012
>>> � bDescriptorType = 0x0001
>>> � bcdUSB = 0x0100
>>> � bDeviceClass = 0x0009
>>> � bDeviceSubClass = 0x0000
>>> � bDeviceProtocol = 0x0000
>>> � bMaxPacketSize0 = 0x0040
>>> � idVendor = 0x0000
>>> � idProduct = 0x0000
>>> � bcdDevice = 0x0100
>>> � iManufacturer = 0x0001 �<Intel>
>>> � iProduct = 0x0002 �<UHCI root HUB>
>>> � iSerialNumber = 0x0000 �<no string>
>>> � bNumConfigurations = 0x0001
>>>
>>> ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps)
>>> pwr=ON
>>>
>>> � bLength = 0x0012
>>> � bDescriptorType = 0x0001
>>> � bcdUSB = 0x0100
>>> � bDeviceClass = 0x0009
>>> � bDeviceSubClass = 0x0000
>>> � bDeviceProtocol = 0x0000
>>> � bMaxPacketSize0 = 0x0040
>>> � idVendor = 0x0000
>>> � idProduct = 0x0000
>>> � bcdDevice = 0x0100
>>> � iManufacturer = 0x0001 �<Intel>
>>> � iProduct = 0x0002 �<UHCI root HUB>
>>> � iSerialNumber = 0x0000 �<no string>
>>> � bNumConfigurations = 0x0001
>>>
>>> ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
>>> pwr=ON
>>>
>>> � bLength = 0x0012
>>> � bDescriptorType = 0x0001
>>> � bcdUSB = 0x0100
>>> � bDeviceClass = 0x0009
>>> � bDeviceSubClass = 0x0000
>>> � bDeviceProtocol = 0x0000
>>> � bMaxPacketSize0 = 0x0040
>>> � idVendor = 0x0000
>>> � idProduct = 0x0000
>>> � bcdDevice = 0x0100
>>> � iManufacturer = 0x0001 �<Intel>
>>> � iProduct = 0x0002 �<UHCI root HUB>
>>> � iSerialNumber = 0x0000 �<no string>
>>> � bNumConfigurations = 0x0001
>>>
>>> ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH
>>> (480Mbps) pwr=ON
>>>
>>> � bLength = 0x0012
>>> � bDescriptorType = 0x0001
>>> � bcdUSB = 0x0200
>>> � bDeviceClass = 0x0009
>>> � bDeviceSubClass = 0x0000
>>> � bDeviceProtocol = 0x0001
>>> � bMaxPacketSize0 = 0x0040
>>> � idVendor = 0x0000
>>> � idProduct = 0x0000
>>> � bcdDevice = 0x0100
>>> � iManufacturer = 0x0001 �<Intel>
>>> � iProduct = 0x0002 �<EHCI root HUB>
>>> � iSerialNumber = 0x0000 �<no string>
>>> � bNumConfigurations = 0x0001
>>>
>>> ugen3.2: <USB 2.0 Storage Device vendor 0x0402> at usbus3, cfg=0
>>> md=HOST spd=HIGH (480Mbps) pwr=ON
>>>
>>> � bLength = 0x0012
>>> � bDescriptorType = 0x0001
>>> � bcdUSB = 0x0200
>>> � bDeviceClass = 0x0000
>>> � bDeviceSubClass = 0x0000
>>> � bDeviceProtocol = 0x0000
>>> � bMaxPacketSize0 = 0x0040
>>> � idVendor = 0x0402
>>> � idProduct = 0x5642
>>> � bcdDevice = 0x0100
>>> � iManufacturer = 0x0000 �<no string>
>>> � iProduct = 0x0001 �<USB 2.0 Storage Device>
>>> � iSerialNumber = 0x0002 �<12345678901234567890>
>>> � bNumConfigurations = 0x0001
>>>
>>> Thanks!
>>>
>>
>> Have you tried a 9-current kernel?
>>
>> --HPS
>>
> Haven't tried a -CURRENT kernel. Guess that a kernel wouldn't be a big
> change, but world.....
> Have usbdevs.h and/or usbdevs_data.h changed considerably?
>
Hello all,
Tried a GENERIC 9.0-CURRENT kernel csup-ped today just about 2 hours
ago. Same problem.
I seem to have been able to fdisk the disk, when bsdlabel-ing I get
kernel: (da0:umass-sim0:0:0:0) AutoSense Failed
The light on the USB cage stays red until I unplug it.
Can anyone assist?
Kind regards,
Spil.
PS from uname 9.0-CURRENT Tue Dec 15 15:09:49 CET 2009
/usr/obj/usr/src/sys/GENERIC i386
------------------------------
End of freebsd-usb Digest, Vol 268, Issue 1
*******************************************