Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

freebsd-usb Digest, Vol 273, Issue 1

20 views

Skip to first unread message

freebsd-u...@freebsd.org

unread,

Jan 26, 2010, 12:38:44 PM1/26/10

to freeb...@freebsd.org

Send freebsd-usb mailing list submissions to
freeb...@freebsd.org

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
or, via email, send a message with subject or body 'help' to
freebsd-u...@freebsd.org

You can reach the person managing the list at
freebsd-...@freebsd.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of freebsd-usb digest..."

Today's Topics:

1. Re: [FreeBSD 8/9] USB webcamd and video4bsd: Call for testing
(Daichi GOTO)
2. Re: usb/142989: canon eos 50D attaches but detaches after few
seconds (1 - 4) (Robert Blacquiere)
3. usb/143139: Quirk for Century EX35SW4_SB4 JBOD (Mike Durian)
4. Re: usb/143139: Quirk for Century EX35SW4_SB4 JBOD
(Hans Petter Selasky)
5. Re: usb/143139: Quirk for Century EX35SW4_SB4 JBOD
(Hans Petter Selasky)
6. Re: SANE vs USB scanner on 8.0 (Torfinn Ingolfsen)
7. Re: SANE vs USB scanner on 8.0 (Warren Block)
8. Re: SANE vs USB scanner on 8.0 (Hans Petter Selasky)
9. Re: SANE vs USB scanner on 8.0 (Torfinn Ingolfsen)
10. Re: SANE vs USB scanner on 8.0 (Warren Block)
11. Re: SANE vs USB scanner on 8.0 (Torfinn Ingolfsen)
12. usb/143186: add USB device IDs for Google Nexus One and for
RealTek Card Reader (J.R. Oldroyd)
13. Re: SANE vs USB scanner on 8.0 (Andrew Reilly)
14. Re: SANE vs USB scanner on 8.0 (Andrew Reilly)
15. Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader (Hans Petter Selasky)
16. Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader (Hans Petter Selasky)
17. Current problem reports assigned to freeb...@FreeBSD.org
(FreeBSD bugmaster)
18. Re: SANE vs USB scanner on 8.0 (Torfinn Ingolfsen)
19. Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader (J.R. Oldroyd)
20. Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader (J.R. Oldroyd)
21. Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader (Hans Petter Selasky)
22. Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader (Hans Petter Selasky)
23. Re: [FreeBSD 8/9] USB webcamd and video4bsd: Call for testing
(Andriy Gapon)
24. Re: [FreeBSD 8/9] USB webcamd and video4bsd: Call for testing
(Hans Petter Selasky)

----------------------------------------------------------------------

Message: 1
Date: Fri, 22 Jan 2010 18:21:21 +0900
From: Daichi GOTO <dai...@freebsd.org>
Subject: Re: [FreeBSD 8/9] USB webcamd and video4bsd: Call for testing
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freebsd-m...@freebsd.org, freebsd...@freebsd.org,
freeb...@freebsd.org
Message-ID: <4B596E11...@freebsd.org>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

On 2010/01/22 17:16, Hans Petter Selasky wrote:
> On Friday 22 January 2010 06:03:07 Daichi GOTO wrote:
>> Hi Hans, I have checked your work, and it works well, great :)
>>
>> This is a little tweak,
>>
>> --- /usr/local/etc/devd/webcamd.conf.orig 2010-01-22 13:19:20.371987293
>> +0900
>> +++ /usr/local/etc/devd/webcamd.conf 2010-01-22 13:52:00.286912793 +0900
>> @@ -1,5 +1,5 @@
>> attach 100 {
>> - device-name "ugen[0-9]+";
>> + device-name "ugen[0-9.]+";
>> match "intclass" "(0x0e|0xff)";
>> action "/usr/local/etc/rc.d/webcamd start $device-name";
>> };
>>
>>
>> I want to know what does "intclass" mean. The webcamd(8) cannot
>> been engaged automatically by devd(8), because of not match of
>> "intclass".
>
> Hi,

Thank you quick response :)

> See:
>
> usbconfig -u 7 -a 2 dump_curr_config_desc | grep -i class

# usbconfig -u 7 -a 2 dump_curr_config_desc | grep -i class
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0001
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x000e
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x0001
bInterfaceSubClass = 0x0001
bInterfaceClass = 0x0001
bInterfaceSubClass = 0x0002
bInterfaceClass = 0x0001
bInterfaceSubClass = 0x0002
#

> To figure out what interface class your USB device is using.
>
> --HPS
> _______________________________________________
> freebsd...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-curre...@freebsd.org"

--
Daichi GOTO
81-42-316-7945 | dai...@ongs.co.jp | http://www.ongs.co.jp
LinkedIn: http://linkedin.com/in/daichigoto

------------------------------

Message: 2
Date: Fri, 22 Jan 2010 17:55:16 +0100
From: Robert Blacquiere <fre...@blacquiere.nl>
Subject: Re: usb/142989: canon eos 50D attaches but detaches after few
seconds (1 - 4)
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freeb...@freebsd.org
Message-ID: <20100122165...@macmini.blacquiere.nl>
Content-Type: text/plain; charset=us-ascii

On Wed, Jan 20, 2010 at 09:20:02AM +0000, Hans Petter Selasky wrote:
> The following reply was made to PR usb/142989; it has been noted by GNATS.
<snip>
> On Tuesday 19 January 2010 21:52:08 robert wrote:
> > >Number: 142989
> > >Category: usb
> > >Synopsis: canon eos 50D attaches but detaches after few seconds (1 -
> > > 4) Confidential: no
> > >Severity: non-critical
> > >Priority: low
> > >Responsible: freebsd-usb
> > >State: open
> > >Quarter:
> > >Keywords:
> > >Date-Required:
> > >Class: sw-bug
> > >Submitter-Id: current-users
> > >Arrival-Date: Tue Jan 19 21:00:20 UTC 2010
> > >Closed-Date:
> > >Last-Modified:
> > >Originator: robert
> > >Release: FreeBSD 8.0
> > >Organization:
> > >Environment:
> >
<snip>
> >
> > attach canon eos 50D firmware version 1.07 with usb on freebsd 8.0 laptop.
> >
>
> Can you try with an 9-current kernel?

Hi,

I have downloaded the FreeBSD 9.0 (CURRENT) amd64 live cd
(FreeBSD-9.0-CURRENT-201001-amd64-livefs.iso) Booted the laptop with
this cd and attached the Canon 50D. ugen6.2 attaches and stays attached
until I disconnect the camera. It seems there is a bug fixed in the time
between 8.0 RELEASE and 9.0-CURRENT.

Regards

Robert Blacquiere

------------------------------

Message: 3
Date: Sat, 23 Jan 2010 15:38:28 -0700 (MST)
From: Mike Durian <dur...@boogie.com>
Subject: usb/143139: Quirk for Century EX35SW4_SB4 JBOD
To: FreeBSD-gn...@FreeBSD.org
Message-ID: <201001232238....@mailhost.boogie.com>

>Number: 143139
>Category: usb
>Synopsis: Quirk for Century EX35SW4_SB4 JBOD
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Sat Jan 23 23:20:01 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Mike Durian
>Release: FreeBSD 8.0-STABLE i386
>Organization:
>Environment:
System: FreeBSD fever.boogie.com 8.0-STABLE FreeBSD 8.0-STABLE #1: Sat Jan 23 09:33:09 MST 2010 ro...@fever.boogie.com:/usr/obj/usr/src/sys/BOOGIE i386

>Description:
This quirk quiets error messages about lack of SYNCHRONIZE CACHE
support on the Century 4 disc jbod.
>How-To-Repeat:
Run ZFS over this device.
>Fix:

--- usbdevs.orig 2010-01-23 09:05:08.000000000 -0700
+++ usbdevs 2010-01-23 09:05:54.000000000 -0700
@@ -1053,6 +1053,7 @@

/* Century products */
product CENTURY EX35QUAT 0x011e Century USB Disk Enclosure
+product CENTURY EX35SW4_SB4 0x011f Century USB Disk Enclosure

/* Cherry products */
product CHERRY MY3000KBD 0x0001 My3000 keyboard
--- quirk/usb_quirk.c.orig 2010-01-23 09:09:44.000000000 -0700
+++ quirk/usb_quirk.c 2010-01-23 09:15:38.000000000 -0700
@@ -169,6 +169,7 @@
USB_QUIRK(CENTURY, EX35QUAT, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_FORCE_SHORT_INQ,
UQ_MSC_NO_START_STOP, UQ_MSC_IGNORE_RESIDUE),
+ USB_QUIRK(CENTURY, EX35SW4_SB4, 0x0000, 0xffff, UQ_MSC_NO_SYNC_CACHE),
USB_QUIRK(CYPRESS, XX6830XX, 0x0000, 0xffff, UQ_MSC_NO_GETMAXLUN,
UQ_MSC_NO_SYNC_CACHE),
USB_QUIRK(DESKNOTE, UCR_61S2B, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
>Release-Note:
>Audit-Trail:
>Unformatted:

------------------------------

Message: 4
Date: Sun, 24 Jan 2010 00:45:27 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/143139: Quirk for Century EX35SW4_SB4 JBOD
To: freeb...@freebsd.org, Mike Durian <dur...@boogie.com>
Cc: FreeBSD-gn...@freebsd.org
Message-ID: <201001240045....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Saturday 23 January 2010 23:38:28 Mike Durian wrote:
> usb/143139
>

Committed to USB P4. See change 173601.

--HPS

------------------------------

Message: 5
Date: Sat, 23 Jan 2010 23:50:03 GMT
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/143139: Quirk for Century EX35SW4_SB4 JBOD
To: freeb...@FreeBSD.org
Message-ID: <201001232350....@freefall.freebsd.org>

The following reply was made to PR usb/143139; it has been noted by GNATS.

From: Hans Petter Selasky <hsel...@c2i.net>
To: freeb...@freebsd.org,
Mike Durian <dur...@boogie.com>
Cc: FreeBSD-gn...@freebsd.org
Subject: Re: usb/143139: Quirk for Century EX35SW4_SB4 JBOD
Date: Sun, 24 Jan 2010 00:45:27 +0100

On Saturday 23 January 2010 23:38:28 Mike Durian wrote:
> usb/143139
>

Committed to USB P4. See change 173601.

--HPS

------------------------------

Message: 6
Date: Sun, 24 Jan 2010 03:10:45 +0100
From: Torfinn Ingolfsen <torfinn....@broadpark.no>
Subject: Re: SANE vs USB scanner on 8.0
To: freeb...@FreeBSD.org
Message-ID: <20100124031045.ad651...@broadpark.no>
Content-Type: text/plain; charset=US-ASCII

Another question about scanners and FreeBSD 8.0-stable: what happened
to uscanner(4)?
The man page is there, but the module is not?

tingo@kg-v2$ uname -a
FreeBSD kg-v2.kg4.no 8.0-STABLE FreeBSD 8.0-STABLE #1: Wed Jan 6
21:21:40 CET 2010 ro...@kg-v2.kg4.no:/usr/obj/usr/src/sys/GENERIC
amd64 tingo@kg-v2$ man -k uscanner uscanner(4) - USB
Scanners tingo@kg-v2$ ls -l /boot/kernel/uscan*
ls: /boot/kernel/uscan*: No such file or directory
tingo@kg-v2$ ls -l /boot/kernel/*uscan*
ls: /boot/kernel/*uscan*: No such file or directory

Yes, I am still trying to get my Agfa Snapscan 1212u to work under
FreeBSD 8.0-stable.

--
Regards,
Torfinn Ingolfsen

------------------------------

Message: 7
Date: Sat, 23 Jan 2010 20:41:53 -0700 (MST)
From: Warren Block <wbl...@wonkity.com>
Subject: Re: SANE vs USB scanner on 8.0
To: Torfinn Ingolfsen <torfinn....@broadpark.no>
Cc: freeb...@freebsd.org
Message-ID: <alpine.BSF.2.00.1...@wonkity.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed

On Sun, 24 Jan 2010, Torfinn Ingolfsen wrote:

> Another question about scanners and FreeBSD 8.0-stable: what happened
> to uscanner(4)?

uscanner didn't provide much (uscanner0 rather than ugenX.Y) and was
actually functionality of some scanners with front panel buttons. It
only recognized scanners through a built-in list, which had to be
maintained as part of the FreeBSD source and was always incomplete.
It's not needed any more.

> The man page is there, but the module is not?

The man page is probably a leftover from a build of FreeBSD 7. It
should go away if you do check-old/delete-old in src.

...
> Yes, I am still trying to get my Agfa Snapscan 1212u to work under
> FreeBSD 8.0-stable.

Don't know about the firmware upload for that scanner, but I've recently
found the easier way to set up USB scanners for SANE. Just use the USB
vendor/product IDs in the SANE config file as they are shown (but didn't
work way back when on FreeBSD, AFAIR). So epson.conf has

usb 0x04b8 0x010a

for my Epson 1640SU. Then scanimage only needs -d and the backend name
to work:

scanimage -d epson --mode gray ...

(Actually, I think that'd work without the -d spec but epson is
commented in SANE's dll.conf.) Note how that doesn't care about USB
unit and address.

Maybe using the USB vendor/product IDs won't trigger the problem with
the snapscan backend?

Just to add: due to the popularity of all-in-one inkjet/scanner/coffee
machine/clock radio units, flatbed scanners are getting really cheap at
thrift stores. I bought an HP 2300C for the princely sum of $2 last
week. It's not much of a scanner, but it works fine with FreeBSD and
doesn't need a firmware download. The Epsons are better (IMO), but not
as common.

-Warren Block * Rapid City, South Dakota USA

------------------------------

Message: 8
Date: Sun, 24 Jan 2010 09:39:22 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: SANE vs USB scanner on 8.0
To: freeb...@freebsd.org
Message-ID: <201001240939....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-1"

On Sunday 24 January 2010 03:10:45 Torfinn Ingolfsen wrote:
> Another question about scanners and FreeBSD 8.0-stable: what happened
> to uscanner(4)?
> The man page is there, but the module is not?
>
> tingo@kg-v2$ uname -a
> FreeBSD kg-v2.kg4.no 8.0-STABLE FreeBSD 8.0-STABLE #1: Wed Jan 6
> 21:21:40 CET 2010 ro...@kg-v2.kg4.no:/usr/obj/usr/src/sys/GENERIC
> amd64 tingo@kg-v2$ man -k uscanner uscanner(4) - USB
> Scanners tingo@kg-v2$ ls -l /boot/kernel/uscan*
> ls: /boot/kernel/uscan*: No such file or directory
> tingo@kg-v2$ ls -l /boot/kernel/*uscan*
> ls: /boot/kernel/*uscan*: No such file or directory
>
> Yes, I am still trying to get my Agfa Snapscan 1212u to work under
> FreeBSD 8.0-stable.
>

Hi,

It was removed and replaced by libusb. Report a bug report to the sane-backend
developers, so that they get aware about the problem.

--HPS

------------------------------

Message: 9
Date: Sun, 24 Jan 2010 14:31:39 +0100
From: Torfinn Ingolfsen <torfinn....@broadpark.no>
Subject: Re: SANE vs USB scanner on 8.0
To: freeb...@FreeBSD.org
Message-ID: <20100124143139.99b7d...@broadpark.no>
Content-Type: text/plain; charset=US-ASCII

On Sat, 23 Jan 2010 20:41:53 -0700 (MST)
Warren Block <wbl...@wonkity.com> wrote:

> Don't know about the firmware upload for that scanner, but I've recently

There is a firmware file, and the upload "just works" under FreeBSD 7.x and earlier.
I have this in /usr/local/etc/sane.d/snapscan.conf:
firmware /usr/local/share/sane/snapscan/SnapScan_1212U_2_Scanwise_2.00.bin

> found the easier way to set up USB scanners for SANE. Just use the USB
> vendor/product IDs in the SANE config file as they are shown (but didn't
> work way back when on FreeBSD, AFAIR). So epson.conf has
>
> usb 0x04b8 0x010a

This is already in snapscan.conf:
# Agfa 1212U
usb 0x06bd 0x0001
usb 0x06bd 0x2061

The last one is the id; why there are two lines I don't know.

> scanimage -d epson --mode gray ...

Doesn't work for mine:
root@kg-v2# scanimage -d snapscan > /tmp/test.pnm
scanimage: open of device snapscan failed: Invalid argument
root@kg-v2# scanimage -v -d snapscan > /tmp/test.pnm
scanimage: open of device snapscan failed: Invalid argument

root@kg-v2# scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

> Maybe using the USB vendor/product IDs won't trigger the problem with
> the snapscan backend?

Goiod idea, but that wasn't the case.

> Just to add: due to the popularity of all-in-one inkjet/scanner/coffee
> machine/clock radio units, flatbed scanners are getting really cheap at
> thrift stores. I bought an HP 2300C for the princely sum of $2 last
> week. It's not much of a scanner, but it works fine with FreeBSD and
> doesn't need a firmware download. The Epsons are better (IMO), but not
> as common.

I agree; flatbed scanners are cheap. However; I have this unit already taking up some space here,
it works with earlier versions of FreeBSD, so I would prefer that I could get it working
with FreeBSD 8 as well.

--
Regards,
Torfinn Ingolfsen

------------------------------

Message: 10
Date: Sun, 24 Jan 2010 09:32:43 -0700 (MST)
From: Warren Block <wbl...@wonkity.com>
Subject: Re: SANE vs USB scanner on 8.0
To: Torfinn Ingolfsen <torfinn....@broadpark.no>
Cc: freeb...@freebsd.org
Message-ID: <alpine.BSF.2.00.1...@wonkity.com>
Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII

On Sun, 24 Jan 2010, Torfinn Ingolfsen wrote:
>
> This is already in snapscan.conf:
> # Agfa 1212U
> usb 0x06bd 0x0001
> usb 0x06bd 0x2061
>
> The last one is the id; why there are two lines I don't know.

There are two versions of the Agfa 1212U.

>> Just to add: due to the popularity of all-in-one inkjet/scanner/coffee
>> machine/clock radio units, flatbed scanners are getting really cheap at
>> thrift stores. I bought an HP 2300C for the princely sum of $2 last
>> week. It's not much of a scanner, but it works fine with FreeBSD and
>> doesn't need a firmware download. The Epsons are better (IMO), but not
>> as common.
>
> I agree; flatbed scanners are cheap. However; I have this unit already taking up some space here,
> it works with earlier versions of FreeBSD, so I would prefer that I could get it working
> with FreeBSD 8 as well.

Understood. It looks like it's going to take some work on the backend
for that to happen. As Hans said, best to file a bug report at
http://www.sane-project.org/bugs.html.

-Warren Block * Rapid City, South Dakota USA

------------------------------

Message: 11
Date: Sun, 24 Jan 2010 20:13:22 +0100
From: Torfinn Ingolfsen <torfinn....@broadpark.no>
Subject: Re: SANE vs USB scanner on 8.0
To: freeb...@FreeBSD.org
Message-ID: <20100124201322.db577...@broadpark.no>
Content-Type: text/plain; charset=US-ASCII

On Sun, 24 Jan 2010 09:39:22 +0100
Hans Petter Selasky <hsel...@c2i.net> wrote:

> It was removed and replaced by libusb.

Ok.

> Report a bug report to the sane-backend
> developers, so that they get aware about the problem.

I am not sure that the bug is with SANE and the snapscan backend, and not in our libusb?
Anyway, I have posted a message[1] to the sane-devel mailing list, we will see if that helps.

References:
1) http://lists.alioth.debian.org/pipermail/sane-devel/2010-January/025968.html
--
Regards,
Torfinn Ingolfsen

------------------------------

Message: 12
Date: Sun, 24 Jan 2010 16:21:44 -0500 (EST)
From: "J.R. Oldroyd" <fb...@opal.com>
Subject: usb/143186: add USB device IDs for Google Nexus One and for
RealTek Card Reader
To: FreeBSD-gn...@FreeBSD.org
Message-ID: <201001242121....@shibato.opal.com>

>Number: 143186
>Category: usb
>Synopsis: add USB device IDs for Google Nexus One and for RealTek Card Reader
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Sun Jan 24 21:30:06 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: J.R. Oldroyd
>Release: FreeBSD 8.0-RELEASE-p1 amd64
>Organization:
>Environment:
System: FreeBSD xx.opal.com 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Sun Jan 24 12:28:02 EST 2010 x...@xx.opal.com:/usr/src/sys/amd64/compile/XX amd64
>Description:
Adds USB device IDs for Google Nexus One and for RealTek Card Reader

Note: The initial USB probe will fail (NOT READY) when attaching an
Android device. This is because attaching an Android device does not
automatically make the SD card available to the computer. The SD card
must be unmounted from the phone in order to make it available to the
computer - an operation that requires manual intervention on the phone
(you must "mount" the card).

Once that is done, the phone's SD card can be mounted using a mount
command. HAL, however, does not see the device once it is available,
so HAL does not auto-mount it. I've not found a quirk or other
work-around for this. Feel free to add one if you know of something.

Note: The RealTek Card Reader has nothing to do with the Nexus One.
I'm just adding its ID at the same time. It is a PCCARD/ExpressCard
reader on my laptop.

>How-To-Repeat:
n/a
>Fix:
--- dev/usb/storage/umass.c.orig 2009-10-24 21:10:29.000000000 -0400
+++ dev/usb/storage/umass.c 2010-01-24 15:29:29.000000000 -0500
@@ -497,6 +497,10 @@
UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
WRONG_CSWSIG
},
+ {USB_VENDOR_GOOGLE, USB_PRODUCT_GOOGLE_NEXUSONE, RID_WILDCARD,
+ UMASS_PROTO_DEFAULT,
+ NO_QUIRKS
+ },
{USB_VENDOR_HAGIWARA, USB_PRODUCT_HAGIWARA_FG, RID_WILDCARD,
UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
NO_QUIRKS
@@ -741,6 +745,10 @@
UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
IGNORE_RESIDUE | NO_START_STOP
},
+ {USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_USB20CRW, RID_WILDCARD,
+ UMASS_PROTO_DEFAULT,
+ NO_QUIRKS
+ },
{USB_VENDOR_SAMSUNG, USB_PRODUCT_SAMSUNG_YP_U2, RID_WILDCARD,
UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
SHUTTLE_INIT | NO_GETMAXLUN
--- dev/usb/usbdevs.orig 2009-10-24 21:10:29.000000000 -0400
+++ dev/usb/usbdevs 2010-01-24 15:27:55.000000000 -0500
@@ -621,6 +621,7 @@
vendor SENAO 0x1740 Senao
vendor METAGEEK 0x1781 MetaGeek
vendor AMIT 0x18c5 AMIT
+vendor GOOGLE 0x18d1 Google
vendor QCOM 0x18e8 Qcom
vendor LINKSYS3 0x1915 Linksys
vendor QUALCOMMINC 0x19d2 Qualcomm, Incorporated
@@ -1383,6 +1384,9 @@
product GOODWAY GWUSB2E 0x6200 GWUSB2E
product GOODWAY RT2573 0xc019 RT2573

+/* Google products */
+product GOOGLE NEXUSONE 0x4e11 Nexus One
+
/* Gravis products */
product GRAVIS GAMEPADPRO 0x4001 GamePad Pro

@@ -2078,6 +2082,7 @@
product RALINK RT2573_2 0x9021 RT2501USB Wireless Adapter

/* ReakTek products */
+product REALTEK USB20CRW 0x0158 USB20CRW Card Reader
/* Green House and CompUSA OEM this part */
product REALTEK USBKR100 0x8150 USBKR100 USB Ethernet
product REALTEK RTL8187 0x8187 RTL8187 Wireless Adapter
>Release-Note:
>Audit-Trail:
>Unformatted:

------------------------------

Message: 13
Date: Mon, 25 Jan 2010 14:57:21 +1100
From: Andrew Reilly <are...@bigpond.net.au>
Subject: Re: SANE vs USB scanner on 8.0
To: Warren Block <wbl...@wonkity.com>
Cc: freeb...@freebsd.org
Message-ID: <20100125035...@duncan.reilly.home>
Content-Type: text/plain; charset=us-ascii

On Sun, Jan 24, 2010 at 09:32:43AM -0700, Warren Block wrote:
> On Sun, 24 Jan 2010, Torfinn Ingolfsen wrote:
> >
> >This is already in snapscan.conf:
> ># Agfa 1212U
> >usb 0x06bd 0x0001
> >usb 0x06bd 0x2061
> >
> >The last one is the id; why there are two lines I don't know.
>
> There are two versions of the Agfa 1212U.
>
> >>Just to add: due to the popularity of all-in-one inkjet/scanner/coffee
> >>machine/clock radio units, flatbed scanners are getting really cheap at
> >>thrift stores. I bought an HP 2300C for the princely sum of $2 last
> >>week. It's not much of a scanner, but it works fine with FreeBSD and
> >>doesn't need a firmware download. The Epsons are better (IMO), but not
> >>as common.
> >
> >I agree; flatbed scanners are cheap. However; I have this unit already
> >taking up some space here,
> >it works with earlier versions of FreeBSD, so I would prefer that I could
> >get it working
> >with FreeBSD 8 as well.
>
> Understood. It looks like it's going to take some work on the backend
> for that to happen. As Hans said, best to file a bug report at
> http://www.sane-project.org/bugs.html.

For what it's worth, I appear to be in exactly the same
situation as Torfinn, with my snapscan-e20. I've now run the
back-end with the SANE_DEBUG_SNAPSCAN env set to 255, and it is
clear that it is running into the same device string parsing
issue:

[sanei_debug] Setting debug level of snapscan to 255.
[snapscan] sane_snapscan_init
[snapscan] sane_snapscan_init: Snapscan backend version 1.4.53
[snapscan] add_usb_device(libusb:/dev/usb:/dev/ugen0.3)
[snapscan] add_usb_device: Detected (kind of) an USB device
[snapscan] snapscani_usb_open(libusb:/dev/usb:/dev/ugen0.3)
[snapscan] snapscani_mutex_open: could not parse device string: Invalid argument
[snapscan] snapscani_usb_open: Can't get semaphore
[snapscan] add_usb_device: error opening device libusb:/dev/usb:/dev/ugen0.3: Invalid argument
[snapscan] sane_snapscan_get_devices (0x7fffffffcbe0, 0)
[snapscan] sane_snapscan_exit

I'll see if I can help with the bug reportage. I know scanners
are inexpensive (this one was), but it used to work very nicely
for my purposes, so I'd like to un-break the software, by
preference.

Cheers,

--
Andrew

------------------------------

Message: 14
Date: Mon, 25 Jan 2010 15:57:20 +1100
From: Andrew Reilly <are...@bigpond.net.au>
Subject: Re: SANE vs USB scanner on 8.0
To: Warren Block <wbl...@wonkity.com>
Cc: freeb...@freebsd.org
Message-ID: <2010012504...@duncan.reilly.home>
Content-Type: text/plain; charset=us-ascii

On Mon, Jan 25, 2010 at 02:57:21PM +1100, Andrew Reilly wrote:
> On Sun, Jan 24, 2010 at 09:32:43AM -0700, Warren Block wrote:
> > Understood. It looks like it's going to take some work on the backend
> > for that to happen. As Hans said, best to file a bug report at
> > http://www.sane-project.org/bugs.html.
>
> For what it's worth, I appear to be in exactly the same
> situation as Torfinn, with my snapscan-e20. I've now run the
> back-end with the SANE_DEBUG_SNAPSCAN env set to 255, and it is
> clear that it is running into the same device string parsing
> issue:

OK, I've "fixed" my copy of the snapscan backend, to behave
nicely with FreeBSD's new libusb. Here's my patch, to be
applied in /usr/ports/graphics/sane-backends/work/sane-backends-1.0.20/backend:

--- snapscan-mutex.c.orig 2008-03-29 07:39:02.000000000 +1100
+++ snapscan-mutex.c 2010-01-25 15:36:47.000000000 +1100
@@ -130,7 +130,7 @@
return 0;
}

- if (sscanf(dev, "libusb:%d:%d", &busnum, &devnum) != 2)
+ if (sscanf(dev, "libusb:/dev/usb:/dev/ugen%d.%d", &busnum, &devnum) != 2)
{
DBG (DL_MAJOR_ERROR, "%s: could not parse device string: %s\n", me, strerror(errno));
return 0;

As you can see, this is pretty stupid: it looks as though the
snapscan driver was trying to extract the bus number and device
number from the libusb device string, so that it could use it to
uniquify the SysV-IPC semaphore key it is about to generate. I
suspect that anything that caused this test to not fail would
have worked just as well.

I don't have a login on the sane-project.org bug list mentioned
above, so if someone who does wouldn't mind adding this info to
the aforementioned bug, I'm sure someone would appreciate it.

In the mean-time, I'll submit a pr on the FreeBSD ports list, in
the hope that a ports patch might work in lieu of an up-stream
fix.

Cheers,

--
Andrew

------------------------------

Message: 15
Date: Mon, 25 Jan 2010 09:31:25 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader
To: freeb...@freebsd.org, "J.R. Oldroyd" <fb...@opal.com>
Cc: FreeBSD-gn...@freebsd.org
Message-ID: <201001250931....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Sunday 24 January 2010 22:21:44 J.R. Oldroyd wrote:
> >Number: 143186
> >Category: usb
> >Synopsis: add USB device IDs for Google Nexus One and for RealTek
> > Card Reader Confidential: no
> >Severity: non-critical
> >Priority: low
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: change-request
> >Submitter-Id: current-users
> >Arrival-Date: Sun Jan 24 21:30:06 UTC 2010
> >Closed-Date:
> >Last-Modified:
> >Originator: J.R. Oldroyd
> >Release: FreeBSD 8.0-RELEASE-p1 amd64
> >Organization:
> >Environment:
>
> System: FreeBSD xx.opal.com 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Sun
> Jan 24 12:28:02 EST 2010 x...@xx.opal.com:/usr/src/sys/amd64/compile/XX
> amd64
>
> >Description:
>
> Adds USB device IDs for Google Nexus One and for RealTek Card Reader
>
> Note: The initial USB probe will fail (NOT READY) when attaching an
> Android device. This is because attaching an Android device does not
> automatically make the SD card available to the computer. The SD card
> must be unmounted from the phone in order to make it available to the
> computer - an operation that requires manual intervention on the phone
> (you must "mount" the card).
>
> Once that is done, the phone's SD card can be mounted using a mount
> command. HAL, however, does not see the device once it is available,
> so HAL does not auto-mount it. I've not found a quirk or other
> work-around for this. Feel free to add one if you know of something.
>
> Note: The RealTek Card Reader has nothing to do with the Nexus One.
> I'm just adding its ID at the same time. It is a PCCARD/ExpressCard
> reader on my laptop.
>
> >How-To-Repeat:
>
> n/a
>
> >Fix:
>
> --- dev/usb/storage/umass.c.orig 2009-10-24 21:10:29.000000000 -0400
> +++ dev/usb/storage/umass.c 2010-01-24 15:29:29.000000000 -0500
> @@ -497,6 +497,10 @@
> UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
> WRONG_CSWSIG
> },
> + {USB_VENDOR_GOOGLE, USB_PRODUCT_GOOGLE_NEXUSONE, RID_WILDCARD,
> + UMASS_PROTO_DEFAULT,
> + NO_QUIRKS
> + },
> {USB_VENDOR_HAGIWARA, USB_PRODUCT_HAGIWARA_FG, RID_WILDCARD,
> UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
> NO_QUIRKS
> @@ -741,6 +745,10 @@
> UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
> IGNORE_RESIDUE | NO_START_STOP
> },
> + {USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_USB20CRW, RID_WILDCARD,
> + UMASS_PROTO_DEFAULT,
> + NO_QUIRKS
> + },
> {USB_VENDOR_SAMSUNG, USB_PRODUCT_SAMSUNG_YP_U2, RID_WILDCARD,
> UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
> SHUTTLE_INIT | NO_GETMAXLUN
> --- dev/usb/usbdevs.orig 2009-10-24 21:10:29.000000000 -0400
> +++ dev/usb/usbdevs 2010-01-24 15:27:55.000000000 -0500
> @@ -621,6 +621,7 @@
> vendor SENAO 0x1740 Senao
> vendor METAGEEK 0x1781 MetaGeek
> vendor AMIT 0x18c5 AMIT
> +vendor GOOGLE 0x18d1 Google
> vendor QCOM 0x18e8 Qcom
> vendor LINKSYS3 0x1915 Linksys
> vendor QUALCOMMINC 0x19d2 Qualcomm, Incorporated
> @@ -1383,6 +1384,9 @@
> product GOODWAY GWUSB2E 0x6200 GWUSB2E
> product GOODWAY RT2573 0xc019 RT2573
>
> +/* Google products */
> +product GOOGLE NEXUSONE 0x4e11 Nexus One
> +
> /* Gravis products */
> product GRAVIS GAMEPADPRO 0x4001 GamePad Pro
>
> @@ -2078,6 +2082,7 @@
> product RALINK RT2573_2 0x9021 RT2501USB Wireless Adapter
>
> /* ReakTek products */
> +product REALTEK USB20CRW 0x0158 USB20CRW Card Reader
> /* Green House and CompUSA OEM this part */
> product REALTEK USBKR100 0x8150 USBKR100 USB Ethernet
> product REALTEK RTL8187 0x8187 RTL8187 Wireless Adapter
>
> >Release-Note:
> >Audit-Trail:
> >Unformatted:

Can you send output from usbconfig -u X -a Y dump_device_desc
dump_curr_config_desc

--HPS

------------------------------

Message: 16
Date: Mon, 25 Jan 2010 08:40:02 GMT
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader
To: freeb...@FreeBSD.org
Message-ID: <201001250840....@freefall.freebsd.org>

The following reply was made to PR usb/143186; it has been noted by GNATS.

From: Hans Petter Selasky <hsel...@c2i.net>
To: freeb...@freebsd.org,
"J.R. Oldroyd" <fb...@opal.com>
Cc: FreeBSD-gn...@freebsd.org
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and for RealTek Card Reader
Date: Mon, 25 Jan 2010 09:31:25 +0100

------------------------------

Message: 17
Date: Mon, 25 Jan 2010 11:07:11 GMT
From: FreeBSD bugmaster <bugm...@FreeBSD.org>
Subject: Current problem reports assigned to freeb...@FreeBSD.org
To: freeb...@FreeBSD.org
Message-ID: <201001251107....@freefall.freebsd.org>

Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker Resp. Description
--------------------------------------------------------------------------------
o usb/143186 usb add USB device IDs for Google Nexus One and for RealTe
o usb/143139 usb Quirk for Century EX35SW4_SB4 JBOD
o usb/143045 usb [umass] [patch] mounting Fujitsu 2600Z camera doesn't
o usb/142991 usb Patch to add Crystalfontz 533 USB LCD
o usb/142989 usb canon eos 50D attaches but detaches after few seconds
o usb/142957 usb patch for USB disk SYNCHRONIZE CACHE problem
o usb/142876 usb sysinstall abort:: usb stick as source media & usb sti
o usb/142719 usb [urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fa
o usb/142713 usb [panic] Kernel Panik when connecting an IPhone 3GS.
o usb/142427 usb EDIMAX EW7318USG should be added to usbdevs
o usb/142387 usb Netgear WPN111 not recognised by uath(4) after uathloa
o usb/142276 usb Cache Synchronization Error with Olympus FE210 Camera
o usb/142229 usb [ums] [hang] connecting a USB mouse to a Dell PE750 lo
o usb/141936 usb [usbdevs] [patch] add support for Advanced W-ZERO3[ES]
o usb/141918 usb ehci_interrupt: unrecoverable error, controller halted
o usb/141680 usb [uath] Netgear WG111T not working with uath driver
o usb/141664 usb [pcm] Logitech USB microphone failure [regression]
o usb/141474 usb [boot] FreeBSD 8.0 can not install from USB CDROM driv
o usb/141467 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter
o usb/141327 usb [ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM
o usb/141313 usb [usb8] nvidia USB 2.0 controller - stops copying on US
o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER
o kern/141011 usb [usb] Encrypted root, geli password at boot; enter key
o usb/140928 usb [u3g] [usb8] [patch] ZTE CDMA2000 1X EV-DO (MG478/AC87
o usb/140920 usb [install] USB based install fails on 8.0-RELEASE [regr
o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b
f usb/140883 usb [axe] [usb8] USB gigabit ethernet hangs after short pe
o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0-
a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl
f usb/140714 usb [hang] [usb8] system freeze when disconect my flash us
o kern/140614 usb [uplcom] [patch] adding support for Radio Shack Gigwar
o usb/140590 usb [bluetooth] [usb8] ng_ubt(4) ng_l2cap_process_cmd_rej
o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d
o usb/140259 usb [libusb] [patch] [usb8] libusb-1.0 portability/compati
o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US
o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A
a usb/139990 usb [panic] [patch] [usb67] Kernel frequently panics after
a usb/139598 usb [umass] [usb8] CAM reports "xptioctl: put "device pass
o usb/139243 usb [uhci] [usb67] unplug prolific USB serial -> uhci_abor
o usb/139142 usb [ehci] [usb8] [patch] ehci drivers (NVIDIA nForce4 USB
o usb/138915 usb [patch] [usb8] [usb67] add support for SheevaPlug seri
a usb/138904 usb [rum] [panic] [usb67] unpluging USB wifi card panics s
f usb/138882 usb [ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t
a usb/138879 usb [uftdi] [patch] Patch to add support for CTI USB-Mini
o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv
o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT
o usb/138570 usb [usb] [panic] USB mass device panics current 7.2-STABL
o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit
o usb/138172 usb [u3g] [patch] [usb67] Additional dev id for u3g (Optio
o usb/138138 usb [u3g] [patch] [usb67] Novatel U760 for u3g (Verizon an
o usb/138124 usb [usbaudio] [usb8] Axed uaudio functionality in the usb
o usb/138119 usb [usb67] [usb8] MultiBay CDROM (probably on USB bus) is
o usb/137872 usb [usb67] [boot] slow booting on usb flash drive
f usb/137848 usb [panic] [usb67] Page fault when using an USB bluetooth
o usb/137806 usb [ukbd] [usb67] USB keyboard doesn't work until it's un
o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no
o usb/137616 usb [usb67][usb8][usbdevs] [patch]: usbdevs update: Please
o usb/137377 usb [usb8] Support for Huawei E180
o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro
p usb/137226 usb [usb67][patch] quirk for Philips extern USB disk
o usb/137190 usb [usb8][patch] inhibit spurious button releases for som
o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo
p usb/137188 usb [usb8][patch] correctly handle USB report descriptors
f bin/137180 usb [build] [patch] building world for 8.0-BETA2 fails on
o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att
p usb/136761 usb [usbdevs][usb67][patch] Teach usbdevs / u3g(4) about H
o usb/135938 usb [aue] [usb67] aue driver only passes traffic in promis
f usb/135857 usb [urtw] [usb67] RTL8187 Wireless Adapter
o usb/135575 usb [usbdevs] [patch] [usb67] Add HTC Wizard phone vid/pid
o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa
p usb/135372 usb [usb67][umass] Quirk report for Teclast TL-C300 usb me
o usb/135348 usb [umass] USB Drive Hangs with ZFS (JMicron USB2/eSata)
o usb/135206 usb machine reboots when inserted USB device
o usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu
o usb/135182 usb UMASS quirk - Olympus FE20 camera
o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible
o usb/134633 usb Add support for WILLCOM03(SHARP smart phone)
o usb/134631 usb [usbdevs] [patch] WiSPY DBx support requires usb tweak
o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g
o usb/134193 usb System freeze on usb MP3 player insertion
o usb/134117 usb [Patch] Add support for 'Option GlobeTrotter HSDPA Mod
o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive
o usb/133989 usb [newusb] [ukbd] USB keyboard dead at mountroot> prompt
o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa
o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache
o usb/133296 usb [rum] driver not working properly in hostap mode
p usb/132799 usb [usb][patch]GENESYS USB2IDE requires NO_SYNCHRONIZE_CA
o usb/132785 usb [usb] [patch] Gemtech remote powersocket is classed as
o usb/132594 usb USB subsystem causes page fault and crashes
o usb/132312 usb Xorg 7.4 halts USB controller
o usb/132080 usb [patch] [usb] [rum] Kernel panic after NOMEM caused by
o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760
o usb/132036 usb [panic] page fault when connecting Olympus C740 camera
o usb/131912 usb [uslcom] [patch] New devices using Silicon Labs chips
o usb/131900 usb [usbdevs] [patch] Additional product identification co
o usb/131583 usb [umass] Failure when detaching umass Device
o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data
o usb/131521 usb Registering Belkin UPS to usb_quirks.c
o usb/131123 usb [patch] re-add UQ_ASSUME_CM_OVER_DATA USB quirk
o usb/131074 usb no run-time detection of usb devices plugged into exte
o usb/130736 usb Page fault unplugging USB stick
o usb/130230 usb Samsung Electronics YP-U3 does not attach in 7.1-RELEA
o usb/130208 usb Boot process severely hampered by umass0 error
o usb/130122 usb [newusb] DVD drive detects as 'da' device
o usb/129945 usb [usbdevs] [patch] add u3g support for Longcheer WM66 U
o usb/129766 usb [usb] plugging in usb modem HUAWEI E226 panics system
o usb/129758 usb [uftdi] [patch] add Pyramid LCD usb support
o usb/129673 usb [uhci] uhci (uhub) confused on replugging USB 1.1 scan
o usb/129522 usb [ubsa] [patch] add support for ZTE AC8700 modem
o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis
o usb/129311 usb [usb] [panic] Instant crash with an USB card reader
o usb/129251 usb [usbdevs] [patch] Liebert UPS being assigned uhid and
o usb/129173 usb [uplcom] [patch] Add support for Corega CG-USBRS232R a
s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa
o usb/128977 usb [usb] [patch] uaudio is not full duplex
o usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2
o usb/128485 usb [umodem] [patch] Nokia N80 modem support
o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive
o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like
o usb/128324 usb [uplcom] [patch] remove baud rate restriction for PL23
o usb/127980 usb [umass] [patch] Fix Samsung YP U2 MP3 player on 7.x an
o usb/127926 usb [boot] USB Timeout during bootup
p usb/127549 usb [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requi
s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should
o usb/127423 usb [boot] BTX halted on Gigabyte GA-MA69VM-S2 / AMD Sempr
o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support
o usb/127248 usb [ucom] panic while uplcom devices attaach and detach
o usb/127222 usb [ohci] Regression in 7.0 usb storage generic driver
o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c
o usb/126848 usb [usb]: USB Keyboard hangs during Installation
o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be
o usb/126519 usb [usb] [panic] panic when plugging in an iphone
o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device
o usb/125736 usb [ukbd] [hang] system hangs after AT keyboard detect if
o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite
o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d
o usb/125450 usb [panic] Removing USB flash card while being accessed c
o usb/125238 usb [ums] Habu Mouse turns off in X
o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U
o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi
o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe
o usb/124758 usb [rum] [panic] rum panics SMP kernel
o usb/124708 usb [panic] Kernel panic on USB KVM reattach
o usb/124604 usb [ums] Microsoft combo wireless mouse doesn't work
o kern/124130 usb [usb] gmirror fails to start usb devices that were pre
o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile
o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with
o usb/123691 usb usbd(8): usbd hangs
o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l
o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U
o usb/123509 usb [umass] continuous reset Samsung SGH-G600 phone
o usb/123352 usb [usbdevs] [patch] Add Option GTMAX3.6/7.2 and Quallcom
o usb/123351 usb [usbdevs] [patch] Add Reiner SCT cyberJack, Omnikey [2
o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um
o usb/122956 usb [ubsa] [patch] add support for Novatel Wireless XU870
o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt
o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa
o usb/122819 usb [usb] [patch] Patch to provide dynamic additions to th
o usb/122813 usb [udbp] [request] udbp driver should be removed in favo
o usb/122621 usb [new driver] [patch] New driver for Sierra Wireless 3G
o usb/122547 usb [ehci] USB Printer not being recognized after reboot
o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci
o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE
o usb/122119 usb [umass] umass device causes creation of daX but not da
o usb/122025 usb [uscanner] [patch] uscanner does not attach to Epson R
o usb/121755 usb [ohci] [patch] Fix panic after ohci/uhub cardbus devic
o usb/121734 usb [ugen] ugen HP1022 printer device not working since up
o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k
o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard
o usb/121426 usb [patch] [uscanner] add HP ScanJet 3570C
o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s
o usb/121232 usb [usb] [panic] USB CardBus card removal causes reboot s
p usb/121184 usb [uipaq] [patch] add ids from linux ipaq driver (plus a
o usb/121169 usb [umass] Issues with usb mp3 player
o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS
o usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det
o usb/120729 usb [panic] fault while in kernel mode with connecting USB
o usb/120572 usb [umass] [patch] quirk to support ASUS P535 as umass (a
o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo
o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou
o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5
o usb/119981 usb [axe] [patch] add support for LOGITEC LAN-GTJ/U2 gigab
o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou
o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch
o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression]
o usb/119513 usb [irq] inserting dlink dwl-g630 wireless card results i
o usb/119509 usb [usb] USB flaky on Dell Optiplex 755
o usb/119481 usb [hang] FreeBSD not responding after connecting USB-Mas
o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress
o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun
o usb/119201 usb [cam] [patch] Quirks for Olympus FE-210 camera, LG and
o usb/118485 usb [usbdevs] [patch] Logitech Headset Workaround
o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer
o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se
o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread
o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi
o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin
o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS
o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE
o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS
o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work
o usb/117893 usb [umass] Lacie USB DVD writing failing
o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory
o usb/117598 usb [uaudio] [patch] Not possible to record with Plantroni
o usb/117313 usb [umass] [panic] panic on usb camera insertion
o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach
o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a
o usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th
o usb/116699 usb [usbhid] USB HID devices do not initialize at system b
o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee
o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300
o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches
o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter
o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI
o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel
o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui
o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco
o usb/114682 usb [umass] generic USB media-card reader unusable
o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker
o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection
o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff
o usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in
o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated
s usb/108344 usb [usb67] [atausb] [panic] kernel with atausb panics whe
o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found
o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device
o usb/107243 usb [usb67] [cam] [quirk] [patch] Apacer USB Flash Drive q
o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu
o usb/105361 usb [usb67] [panic] Kernel panic during unmounting mass st
s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never
o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil
o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele
o usb/101775 usb [usb67] [usb8] [libusbhid] [patch] possible error in r
o usb/101761 usb [usb67] [patch] [request] usb.h: increase maximal size
o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar
o usb/99538 usb [keyboard] while using USB keyboard default params of
o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar
o kern/99200 usb [bluetooth] SMP-Kernel crashes reliably when Bluetooth
o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3
o usb/97472 usb [cam] [patch] add support for Olympus C150,D390
s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2.
o usb/97175 usb [umass] [hang] USB cardreader hangs system
o usb/96457 usb [umass] [panic] fatback on umass = reboot
o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram
o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync
s usb/96120 usb [ums] [request] USB mouse not always detected
s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620
o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb
s usb/95348 usb [keyboard] USB keyboard unplug causes noise on screen
o usb/95037 usb [umass] USB disk not recognized on hot-plug.
o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk
o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI
o usb/94384 usb [panic] kernel panic with usb2 hardware
o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB
o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion
o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work
o usb/93155 usb [ulpt] /dev/ulpt0: device busy, USB printer does not w
o usb/92852 usb [ums] [patch] Vertical scroll not working properly on
o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS
o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb
o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE
o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand
o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg
o usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n
o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return "
o usb/91629 usb [usb] usbd_abort_pipe() may result in infinite loop
o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work
o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500
o usb/91283 usb [boot] [regression] booting very slow with usb devices
o usb/91238 usb [umass] USB tape unit fails to write a second tape fil
o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas
o usb/89954 usb [umass] [panic] USB Disk driver race condition?
s usb/89003 usb [request] LaCie Firewire drive not properly supported
o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg
o usb/88408 usb [axe] axe0 read PHY failed
o usb/87648 usb [mouse] Logitech USB-optical mouse problem.
o usb/87224 usb [usb] Cannot mount USB Zip750
o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the
o usb/86298 usb [mouse] Known good USB mouse won't work with correct s
s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device
f usb/84750 usb [hang] 6-BETA2 reboot/shutdown with root_fs on externa
s usb/84336 usb [usb] [reboot] instant system reboot when unmounting a
o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN
o usb/83863 usb [ugen] Communication problem between opensc/openct via
o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe
o usb/83563 usb [umass] [panic] Page Fault while detaching Mpman Usb d
o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent
o usb/82660 usb [ehci] [panic] EHCI: I/O stuck in state 'physrd'/panic
s usb/82569 usb [umass] [panic] USB mass storage plug/unplug causes sy
o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected
o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack
o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci
o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55.
o usb/80862 usb [patch] USB locking issues: missing some Giant calls
o usb/80854 usb [patch] [request] suggestion for new iface-no-probe me
o usb/80829 usb [modules] [panic] possible panic when loading USB-modu
s usb/80777 usb [request] usb_rem_task() should wait for callback to c
s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_
o usb/80774 usb [patch] have "usbd_find_desc" in line with the other "
o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails
o usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze
o usb/79723 usb [usb] [request] prepare for high speed isochronous tra
o usb/79722 usb [ehci] wrong alignments in ehci.h
a usb/79656 usb [ehci] RHSC interrupts lost
o usb/79524 usb [ulpt] printing to Minolta PagePro 1[23]xxW via USB fa
o usb/79287 usb [uhci] [hang] UHCI hang after interrupt transfer
o usb/79269 usb [ohci] USB ohci da0 plug/unplug causes crashes and loc
o usb/78984 usb [umass] [patch] Creative MUVO umass failure
o usb/77294 usb [ucom] [panic] ucom + ulpcom panic
o usb/77184 usb [umass] [panic] kernel panic on USB device disconnect,
o usb/76732 usb [ums] Mouse problems with USB KVM Switch
o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device
o usb/76461 usb [umass] disklabel of umass(4)-CAM(4)-da(4) not used by
o usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0
s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade
o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn
o usb/75797 usb [sound] [regression] 5.3-STABLE(2005 1/4) detect USB h
o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for
o usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace)
o usb/74771 usb [umass] [hang] mounting write-protected umass device a
s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL
o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R
o usb/73307 usb [panic] Kernel panics on USB disconnect
s usb/72733 usb [ucom] [request] Kyocera 7135 Palm OS connection probl
o usb/71455 usb [umass] Slow USB umass performance of 5.3
o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati
o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n
o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1
o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes
o usb/70523 usb [umct] [patch] umct sending/receiving wrong characters
o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports
o usb/68232 usb [ugen] [patch] ugen(4) isochronous handling correction
o usb/67301 usb [uftdi] [panic] RTS and system panic
o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct
o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes
s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s
o usb/59698 usb [keyboard] [patch] Rework of ukbd HID to AT code trans
s bin/57255 usb [patch] usbd(8) and multi-function devices
s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2
s usb/51958 usb [urio] [patch] update for urio driver
o i386/46371 usb USB controller cannot be initialized on IBM Netfinity
o usb/40948 usb [umass] [request] USB HP CDW8200 does not work
o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem

343 problems total.

------------------------------

Message: 18
Date: Mon, 25 Jan 2010 12:19:23 +0100
From: Torfinn Ingolfsen <torfinn....@broadpark.no>
Subject: Re: SANE vs USB scanner on 8.0
To: freeb...@FreeBSD.org
Message-ID: <20100125121923.9bdf5...@broadpark.no>
Content-Type: text/plain; charset=US-ASCII

On Mon, 25 Jan 2010 15:57:20 +1100
Andrew Reilly <are...@bigpond.net.au> wrote:

> OK, I've "fixed" my copy of the snapscan backend, to behave
> nicely with FreeBSD's new libusb. Here's my patch, to be
> applied in /usr/ports/graphics/sane-backends/work/sane-backends-1.0.20/backend:

This patch fixes my problem too. Thanks!
--
Torfinn

------------------------------

Message: 19
Date: Mon, 25 Jan 2010 18:30:08 GMT
From: "J.R. Oldroyd" <fb...@opal.com>
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader
To: freeb...@FreeBSD.org
Message-ID: <201001251830....@freefall.freebsd.org>

The following reply was made to PR usb/143186; it has been noted by GNATS.

From: "J.R. Oldroyd" <fb...@opal.com>
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freeb...@freebsd.org, FreeBSD-gn...@freebsd.org
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and for
RealTek Card Reader
Date: Mon, 25 Jan 2010 13:23:09 -0500

--Sig_/zI4akFpfQk2kL7icetzw4jz
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

On Mon, 25 Jan 2010 09:31:25 +0100, Hans Petter Selasky <hsel...@c2i.net> =
wrote:
>
> Can you send output from usbconfig -u X -a Y dump_device_desc=20
> dump_curr_config_desc=20
>=20

Sure...

ugen4.2: <Nexus One Google, Inc.> at usbus4, cfg=3D0 md=3DHOST spd=3DHIGH (=
480Mbps) pwr=3DON

bLength =3D 0x0012=20
bDescriptorType =3D 0x0001=20
bcdUSB =3D 0x0102=20
bDeviceClass =3D 0x0000=20
bDeviceSubClass =3D 0x0000=20
bDeviceProtocol =3D 0x0000=20
bMaxPacketSize0 =3D 0x0040=20
idVendor =3D 0x18d1=20
idProduct =3D 0x4e12=20
bcdDevice =3D 0x0100=20
iManufacturer =3D 0x0003 <Google, Inc.>
iProduct =3D 0x0002 <Nexus One>
iSerialNumber =3D 0x0001 <xxxxxxxxxxxxxx>
bNumConfigurations =3D 0x0001=20

Configuration index 0

bLength =3D 0x0009=20
bDescriptorType =3D 0x0002=20
wTotalLength =3D 0x0037=20
bNumInterfaces =3D 0x0002=20
bConfigurationValue =3D 0x0001=20
iConfiguration =3D 0x0000 <no string>
bmAttributes =3D 0x0080=20
bMaxPower =3D 0x0080=20

Interface 0
bLength =3D 0x0009=20
bDescriptorType =3D 0x0004=20
bInterfaceNumber =3D 0x0000=20
bAlternateSetting =3D 0x0000=20
bNumEndpoints =3D 0x0002=20
bInterfaceClass =3D 0x0008=20
bInterfaceSubClass =3D 0x0006=20
bInterfaceProtocol =3D 0x0050=20
iInterface =3D 0x0000 <no string>

Endpoint 0
bLength =3D 0x0007=20
bDescriptorType =3D 0x0005=20
bEndpointAddress =3D 0x0001=20
bmAttributes =3D 0x0002=20
wMaxPacketSize =3D 0x0200=20
bInterval =3D 0x0000=20
bRefresh =3D 0x0000=20
bSynchAddress =3D 0x0000=20

Endpoint 1
bLength =3D 0x0007=20
bDescriptorType =3D 0x0005=20
bEndpointAddress =3D 0x0081=20
bmAttributes =3D 0x0002=20
wMaxPacketSize =3D 0x0200=20
bInterval =3D 0x0000=20
bRefresh =3D 0x0000=20
bSynchAddress =3D 0x0000=20

Interface 1
bLength =3D 0x0009=20
bDescriptorType =3D 0x0004=20
bInterfaceNumber =3D 0x0001=20
bAlternateSetting =3D 0x0000=20
bNumEndpoints =3D 0x0002=20
bInterfaceClass =3D 0x00ff=20
bInterfaceSubClass =3D 0x0042=20
bInterfaceProtocol =3D 0x0001=20
iInterface =3D 0x0000 <no string>

Endpoint 0
bLength =3D 0x0007=20
bDescriptorType =3D 0x0005=20
bEndpointAddress =3D 0x0002=20
bmAttributes =3D 0x0002=20
wMaxPacketSize =3D 0x0200=20
bInterval =3D 0x0000=20
bRefresh =3D 0x0000=20
bSynchAddress =3D 0x0000=20

Endpoint 1
bLength =3D 0x0007=20
bDescriptorType =3D 0x0005=20
bEndpointAddress =3D 0x0082=20
bmAttributes =3D 0x0002=20
wMaxPacketSize =3D 0x0200=20
bInterval =3D 0x0000=20
bRefresh =3D 0x0000=20
bSynchAddress =3D 0x0000=20

--Sig_/zI4akFpfQk2kL7icetzw4jz
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (FreeBSD)

iEYEARECAAYFAktd4Y0ACgkQls33urr0k4lgqQCcCTn3iyAEDsiBQMrVoSqJuoKD
hDUAniZ0lR8Wda5/NOh6YcMzTiWVgK4S
=RDM5
-----END PGP SIGNATURE-----

--Sig_/zI4akFpfQk2kL7icetzw4jz--

------------------------------

Message: 20
Date: Mon, 25 Jan 2010 13:23:09 -0500
From: "J.R. Oldroyd" <fb...@opal.com>
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: FreeBSD-gn...@freebsd.org, freeb...@freebsd.org
Message-ID: <20100125132...@shibato.opal.com>
Content-Type: text/plain; charset="us-ascii"

On Mon, 25 Jan 2010 09:31:25 +0100, Hans Petter Selasky <hsel...@c2i.net> wrote:
>
> Can you send output from usbconfig -u X -a Y dump_device_desc
> dump_curr_config_desc
>

Sure...

ugen4.2: <Nexus One Google, Inc.> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0102
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x18d1
idProduct = 0x4e12
bcdDevice = 0x0100
iManufacturer = 0x0003 <Google, Inc.>
iProduct = 0x0002 <Nexus One>
iSerialNumber = 0x0001 <xxxxxxxxxxxxxx>
bNumConfigurations = 0x0001

Configuration index 0

bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0037
bNumInterfaces = 0x0002
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x0080
bMaxPower = 0x0080

Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x0008
bInterfaceSubClass = 0x0006
bInterfaceProtocol = 0x0050
iInterface = 0x0000 <no string>

Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0001
bmAttributes = 0x0002
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000

Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081
bmAttributes = 0x0002
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000

Interface 1
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0001
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x00ff
bInterfaceSubClass = 0x0042
bInterfaceProtocol = 0x0001
iInterface = 0x0000 <no string>

Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0002
bmAttributes = 0x0002
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000

Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0082
bmAttributes = 0x0002
wMaxPacketSize = 0x0200
bInterval = 0x0000
bRefresh = 0x0000
bSynchAddress = 0x0000

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20100125/2bdf2d61/signature-0001.pgp

------------------------------

Message: 21
Date: Mon, 25 Jan 2010 20:09:34 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader
To: "J.R. Oldroyd" <fb...@opal.com>
Cc: FreeBSD-gn...@freebsd.org, freeb...@freebsd.org
Message-ID: <201001252009....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Monday 25 January 2010 19:23:09 J.R. Oldroyd wrote:
> On Mon, 25 Jan 2010 09:31:25 +0100, Hans Petter Selasky <hsel...@c2i.net>
wrote:
> > Can you send output from usbconfig -u X -a Y dump_device_desc
> > dump_curr_config_desc
>
> Sure...

Is interface 1 the SD-card interface?

--HPS

------------------------------

Message: 22
Date: Mon, 25 Jan 2010 19:20:08 GMT
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and
for RealTek Card Reader
To: freeb...@FreeBSD.org
Message-ID: <201001251920....@freefall.freebsd.org>

The following reply was made to PR usb/143186; it has been noted by GNATS.

From: Hans Petter Selasky <hsel...@c2i.net>
To: "J.R. Oldroyd" <fb...@opal.com>
Cc: freeb...@freebsd.org,
FreeBSD-gn...@freebsd.org
Subject: Re: usb/143186: add USB device IDs for Google Nexus One and for RealTek Card Reader
Date: Mon, 25 Jan 2010 20:09:34 +0100

------------------------------

Message: 23
Date: Tue, 26 Jan 2010 19:33:56 +0200
From: Andriy Gapon <a...@icyb.net.ua>
Subject: Re: [FreeBSD 8/9] USB webcamd and video4bsd: Call for testing
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freebsd-m...@freebsd.org, freeb...@freebsd.org
Message-ID: <4B5F2784...@icyb.net.ua>
Content-Type: text/plain; charset=UTF-8

Hans,

is this setup (video4bsd+webcamd+etc) supposed to work with USB Video Class (UVC)
devices?
Namely, I have a webcam built into Dell SP2208WFP monitor:
$ usbconfig
...
ugen3.2: <product 0x2512 vendor 0x0424> at usbus3, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE
ugen3.3: <Monitor Webcam (SP2208WFP) Mic-OmniVision Technologies,
Inc.538-2640-07.08.09.6> at u, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen3.4: <product 0x2514 vendor 0x0424> at usbus3, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE

BTW, 'at u,' above is not a typo or copy/paste error, it's how it actually appears
on the screen.

--
Andriy Gapon

------------------------------

Message: 24
Date: Tue, 26 Jan 2010 18:37:08 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: [FreeBSD 8/9] USB webcamd and video4bsd: Call for testing
To: Andriy Gapon <a...@icyb.net.ua>
Cc: freebsd-m...@freebsd.org, freeb...@freebsd.org
Message-ID: <201001261837....@c2i.net>
Content-Type: Text/Plain; charset="utf-8"

On Tuesday 26 January 2010 18:33:56 Andriy Gapon wrote:
> Hans,
>
> is this setup (video4bsd+webcamd+etc) supposed to work with USB Video Class
> (UVC) devices?
> Namely, I have a webcam built into Dell SP2208WFP monitor:
> $ usbconfig
> ...
> ugen3.2: <product 0x2512 vendor 0x0424> at usbus3, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=SAVE
> ugen3.3: <Monitor Webcam (SP2208WFP) Mic-OmniVision Technologies,
> Inc.538-2640-07.08.09.6> at u, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
> ugen3.4: <product 0x2514 vendor 0x0424> at usbus3, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=SAVE
>
> BTW, 'at u,' above is not a typo or copy/paste error, it's how it actually
> appears on the screen.
>

Hi,

The string is just too big, so it gets truncated. Send me a dump of the config
descriptor for the webcamera. If it says 0x0e for interface class, it's most
likely supported.

--HPS

------------------------------

End of freebsd-usb Digest, Vol 273, Issue 1
*******************************************

0 new messages