Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

freebsd-usb Digest, Vol 269, Issue 2

17 views

Skip to first unread message

freebsd-u...@freebsd.org

unread,

Jan 2, 2010, 12:25:42 PM1/2/10

to freeb...@freebsd.org

Send freebsd-usb mailing list submissions to
freeb...@freebsd.org

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
or, via email, send a message with subject or body 'help' to
freebsd-u...@freebsd.org

You can reach the person managing the list at
freebsd-...@freebsd.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of freebsd-usb digest..."

Today's Topics:

1. HASP SRM USB key (Serg Z)
2. usb/141867: ygurftob (ygurftob)
3. Re: junk /141867: ygurftob (bru...@FreeBSD.org)
4. Re: usb/138570: [usb] [panic] USB mass device panics current
7.2-STABLE (lin...@FreeBSD.org)
5. usb/141918: ehci_interrupt: unrecoverable error, controller
halted (sparc64) (Andrew Belashov)
6. Re: usb/141918: ehci_interrupt: unrecoverable error,
controller halted (sparc64) (Hans Petter Selasky)
7. Re: usb/141918: ehci_interrupt: unrecoverable error,
controller halted (sparc64) (Hans Petter Selasky)
8. Re: usb/141936: [usbdevs] [patch] add support for Advanced
W-ZERO3[ES] (WS011SH) (lin...@FreeBSD.org)
9. Re: usb/141936: [usbdevs] [patch] add support for Advanced
W-ZERO3[ES] (WS011SH) (Hans Petter Selasky)
10. libusb-config missing? (Daniel O'Connor)
11. Re: libusb-config missing? (Hans Petter Selasky)
12. Re: libusb-config missing? (Daniel O'Connor)
13. Re: libusb-config missing? (Hans Petter Selasky)
14. Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs
update: Please add JMicron's entry (plasmaball)
15. Re: RELENG_8 + UPS USB Interface + NUT (Vinicius Abrahao)
16. Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs
update: Please add JMicron's entry (Hans Petter Selasky)
17. Re: usb thermometer - TEMPer - FreeBSD (Torfinn Ingolfsen)
18. Current problem reports assigned to freeb...@FreeBSD.org
(FreeBSD bugmaster)
19. Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs
update: Please add JMicron's entry (plasmaball)
20. Re: usb thermometer - TEMPer - FreeBSD (Hans Petter Selasky)
21. Fwd: My first question (???????? ????????)
22. Re: usb/141936: commit references a PR (dfilter service)
23. Re: usb thermometer - TEMPer - FreeBSD (Stefan Bethke)
24. Re: Fwd: My first question (Peter Jeremy)
25. usb/142225: [patch] Patch to add Quirk for Western Digital
Mybook (Thomas Ward)
26. Re: usb/142225: [patch] Patch to add Quirk for Western
Digital Mybook (Hans Petter Selasky)
27. Re: usb/142225: [patch] Patch to add Quirk for Western
Digital Mybook (Hans Petter Selasky)
28. Re: usb/142228: [usbdevs] [patch] add a USB-HDD to
usb_quirk.c and usbdevs (lin...@FreeBSD.org)

----------------------------------------------------------------------

Message: 1
Date: Tue, 22 Dec 2009 09:55:18 +0300
From: Serg Z <z_ser...@mail.ru>
Subject: HASP SRM USB key
To: freeb...@freebsd.org
Message-ID: <E1NMyeM-0002WG-00....@f3.mail.ru>
Content-Type: text/plain; charset=koi8-r

Hello!

I have HASP SRM USB key and some time for test patches for it.
Where I can find it?

ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen0.1.0: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen1.1.0: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen2.1.0: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen3.1.0: uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.1.0: uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen5.1.0: uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
ugen6.1: <UHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen6.1.0: uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
ugen7.1: <EHCI root HUB Intel> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen7.1.0: uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
ugen7.2: <MF4100 Canon Inc.> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen7.2.1: ulpt0: <Canon Inc. MF4100, class 0/0, rev 2.00/1.00, addr 2>
ugen4.2: <HP LaserJet 1200 HewLett Packard> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.2.0: ulpt1: <HewLett Packard HP LaserJet 1200, class 0/0, rev 1.10/1.00, addr 2>
ugen0.2: <HASP HL 3.21 AKS> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON

Thanks
Bye. Serg

------------------------------

Message: 2
Date: Tue, 22 Dec 2009 08:34:10 GMT
From: ygurftob <kqyx...@aadlxufy.com>
Subject: usb/141867: ygurftob
To: freebsd-gn...@FreeBSD.org
Message-ID: <200912220834....@www.freebsd.org>

>Number: 141867
>Category: usb
>Synopsis: ygurftob
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: update
>Submitter-Id: current-users
>Arrival-Date: Tue Dec 22 08:40:09 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: ygurftob
>Release: ygurftob
>Organization:
ygurftob
>Environment:
ygurftob
>Description:
mxrofpot http://gyjhfgdt.com paxrckzx ihgzkjzx <a href="http://gkmrgebz.com">utltcbux</a> [URL=http://zrnzmnbf.com]lgtrzxgu[/URL]
>How-To-Repeat:
ygurftob
>Fix:
ygurftob

>Release-Note:
>Audit-Trail:
>Unformatted:

------------------------------

Message: 3
Date: Tue, 22 Dec 2009 09:05:05 GMT
From: bru...@FreeBSD.org
Subject: Re: junk /141867: ygurftob
To: kqyx...@aadlxufy.com, bru...@FreeBSD.org, freeb...@FreeBSD.org
Message-ID: <200912220905....@freefall.freebsd.org>

Synopsis: ygurftob

State-Changed-From-To: open->closed
State-Changed-By: brucec
State-Changed-When: Tue Dec 22 09:04:43 UTC 2009
State-Changed-Why:
spam

http://www.freebsd.org/cgi/query-pr.cgi?pr=141867

------------------------------

Message: 4
Date: Tue, 22 Dec 2009 09:47:55 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/138570: [usb] [panic] USB mass device panics current
7.2-STABLE
To: lin...@FreeBSD.org, freebs...@FreeBSD.org,
freeb...@FreeBSD.org
Message-ID: <200912220947....@freefall.freebsd.org>

Old Synopsis: USB mass device panics current 7.2-STABLE
New Synopsis: [usb] [panic] USB mass device panics current 7.2-STABLE

Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
Responsible-Changed-By: linimon
Responsible-Changed-When: Tue Dec 22 09:47:22 UTC 2009
Responsible-Changed-Why:
Reassign to usb.

http://www.freebsd.org/cgi/query-pr.cgi?pr=138570

------------------------------

Message: 5
Date: Wed, 23 Dec 2009 14:15:42 +0300 (MSK)
From: Andrew Belashov <b...@orel.ru>
Subject: usb/141918: ehci_interrupt: unrecoverable error, controller
halted (sparc64)
To: FreeBSD-gn...@FreeBSD.org
Message-ID: <200912231115....@relay.orel.ru>

>Number: 141918
>Category: usb
>Synopsis: ehci_interrupt: unrecoverable error, controller halted (sparc64)
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Dec 23 11:40:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Andrew Belashov
>Release: FreeBSD 8.0-RELEASE sparc64
>Organization:
CT
>Environment:
System: FreeBSD bel.localdomain 8.0-RELEASE FreeBSD 8.0-RELEASE #3: Wed Dec 2
00:54:28 MSK 2009 b...@bel.localdomain:/usr/obj/usr/src/sys/SUNC3D sparc64

Hardware: Sun Microsystems ULTRA 60
>Description:
After upgrading from FreeBSD 7.2-RELEASE to 8.0-RELEASE there were
problems with USB. Attempt to mount flash drive leads to an error in USB
EHCI driver. Here are the kernel messages:

ehci_interrupt: unrecoverable error, controller halted
cmd=0x00010020
EHCI_CMD_ITC_1
EHCI_CMD_ASE
sts=0x0000b000
EHCI_STS_ASS
EHCI_STS_REC
EHCI_STS_HCH
ien=0x00000037
frindex=0x0000169e ctrdsegm=0x00000000 periodic=0xfee30000 async=0xfee35600
port 1 status=0x00001000
port 2 status=0x00001000
port 3 status=0x00001005
port 4 status=0x00003400
ehci_dump_isoc: isochronous dump from frame 0x053:
ITD(0xfffff800813a3900) at 0xff185900
next=0xff384204
status[0]=0x00000000; <>
status[1]=0x00000000; <>
status[2]=0x00000000; <>
status[3]=0x00000000; <>
status[4]=0x00000000; <>
status[5]=0x00000000; <>
status[6]=0x00000000; <>
status[7]=0x00000000; <>
bp[0]=0x00000000
addr=0x00; endpt=0x0
bp[1]=0x00000000
dir=out; mpl=0x00
bp[2..6]=0x00000000,0x00000000,0x00000000,0x00000000,0x00000000
bp_hi=0x00000000,0x00000000,0x00000000,0x00000000,
0x00000000,0x00000000,0x00000000
SITD(0xfffff800813b4200) at 0xff384200
next=0xfef85502
portaddr=0x00000000 dir=out addr=0 endpt=0x0 port=0x0 huba=0x0
mask=0x00000000
status=0x00000000 <> len=0x0
back=0x00000001, bp=0x00000000,0x00000000,0x00000000,0x00000000
ehci_interrupt: blocking interrupts 0x10

Full dmesg:
http://orel.ru/~bel/usb/dmesg.txt

Kernel config:
http://orel.ru/~bel/usb/SUNC3D.txt

>How-To-Repeat:
Insert USB Flash drive and try to mount it for read-write.
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted:

------------------------------

Message: 6
Date: Wed, 23 Dec 2009 16:25:53 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/141918: ehci_interrupt: unrecoverable error,
controller halted (sparc64)
To: freeb...@freebsd.org, Andrew Belashov <b...@orel.ru>
Cc: FreeBSD-gn...@freebsd.org
Message-ID: <200912231625....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Wednesday 23 December 2009 12:15:42 Andrew Belashov wrote:
> >Number: 141918
> >Category: usb
> >Synopsis: ehci_interrupt: unrecoverable error, controller halted
> > (sparc64) Confidential: no
> >Severity: serious
> >Priority: medium
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Wed Dec 23 11:40:01 UTC 2009
> >Closed-Date:
> >Last-Modified:
> >Originator: Andrew Belashov
> >Release: FreeBSD 8.0-RELEASE sparc64
> >Organization:
>
> CT
>
> >Environment:
>
> System: FreeBSD bel.localdomain 8.0-RELEASE FreeBSD 8.0-RELEASE #3: Wed Dec
> 2 00:54:28 MSK 2009 b...@bel.localdomain:/usr/obj/usr/src/sys/SUNC3D sparc64
>
> Hardware: Sun Microsystems ULTRA 60
>
> >Description:
>
> After upgrading from FreeBSD 7.2-RELEASE to 8.0-RELEASE there were
> problems with USB. Attempt to mount flash drive leads to an error in USB
> EHCI driver. Here are the kernel messages:
>
> ehci_interrupt: unrecoverable error, controller halted
> cmd=0x00010020
> EHCI_CMD_ITC_1
> EHCI_CMD_ASE
> sts=0x0000b000
> EHCI_STS_ASS
> EHCI_STS_REC
> EHCI_STS_HCH
> ien=0x00000037
> frindex=0x0000169e ctrdsegm=0x00000000 periodic=0xfee30000 async=0xfee35600
> port 1 status=0x00001000
> port 2 status=0x00001000
> port 3 status=0x00001005
> port 4 status=0x00003400
> ehci_dump_isoc: isochronous dump from frame 0x053:
> ITD(0xfffff800813a3900) at 0xff185900
> next=0xff384204
> status[0]=0x00000000; <>
> status[1]=0x00000000; <>
> status[2]=0x00000000; <>
> status[3]=0x00000000; <>
> status[4]=0x00000000; <>
> status[5]=0x00000000; <>
> status[6]=0x00000000; <>
> status[7]=0x00000000; <>
> bp[0]=0x00000000
> addr=0x00; endpt=0x0
> bp[1]=0x00000000
> dir=out; mpl=0x00
> bp[2..6]=0x00000000,0x00000000,0x00000000,0x00000000,0x00000000
> bp_hi=0x00000000,0x00000000,0x00000000,0x00000000,
> 0x00000000,0x00000000,0x00000000
> SITD(0xfffff800813b4200) at 0xff384200
> next=0xfef85502
> portaddr=0x00000000 dir=out addr=0 endpt=0x0 port=0x0 huba=0x0
> mask=0x00000000
> status=0x00000000 <> len=0x0
> back=0x00000001, bp=0x00000000,0x00000000,0x00000000,0x00000000
> ehci_interrupt: blocking interrupts 0x10
>
> Full dmesg:
> http://orel.ru/~bel/usb/dmesg.txt
>
> Kernel config:
> http://orel.ru/~bel/usb/SUNC3D.txt
>
> >How-To-Repeat:
>
> Insert USB Flash drive and try to mount it for read-write.
>

Hi,

My guess for this issue is that the cache invalidate and cache flush
instructions are not properly implemented by busdma on your platform. Please
check that first.

--HPS

------------------------------

Message: 7
Date: Wed, 23 Dec 2009 15:30:04 GMT
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/141918: ehci_interrupt: unrecoverable error,
controller halted (sparc64)
To: freeb...@FreeBSD.org
Message-ID: <200912231530....@freefall.freebsd.org>

The following reply was made to PR usb/141918; it has been noted by GNATS.

From: Hans Petter Selasky <hsel...@c2i.net>
To: freeb...@freebsd.org,
Andrew Belashov <b...@orel.ru>
Cc: FreeBSD-gn...@freebsd.org
Subject: Re: usb/141918: ehci_interrupt: unrecoverable error, controller halted (sparc64)
Date: Wed, 23 Dec 2009 16:25:53 +0100

------------------------------

Message: 8
Date: Thu, 24 Dec 2009 13:05:58 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/141936: [usbdevs] [patch] add support for Advanced
W-ZERO3[ES] (WS011SH)
To: lin...@FreeBSD.org, freebs...@FreeBSD.org,
freeb...@FreeBSD.org
Message-ID: <200912241305....@freefall.freebsd.org>

Old Synopsis: [PATCH] add support for Advanced W-ZERO3[ES] (WS011SH)
New Synopsis: [usbdevs] [patch] add support for Advanced W-ZERO3[ES] (WS011SH)

Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
Responsible-Changed-By: linimon
Responsible-Changed-When: Thu Dec 24 13:05:20 UTC 2009
Responsible-Changed-Why:
Over to maintainer(s).

http://www.freebsd.org/cgi/query-pr.cgi?pr=141936

------------------------------

Message: 9
Date: Thu, 24 Dec 2009 14:35:52 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/141936: [usbdevs] [patch] add support for Advanced
W-ZERO3[ES] (WS011SH)
To: freeb...@freebsd.org
Cc: freebs...@freebsd.org, lin...@freebsd.org
Message-ID: <200912241435....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Thursday 24 December 2009 14:05:58 lin...@freebsd.org wrote:
> Old Synopsis: [PATCH] add support for Advanced W-ZERO3[ES] (WS011SH)
> New Synopsis: [usbdevs] [patch] add support for Advanced W-ZERO3[ES]
> (WS011SH)
>
> Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
> Responsible-Changed-By: linimon
> Responsible-Changed-When: Thu Dec 24 13:05:20 UTC 2009
> Responsible-Changed-Why:
> Over to maintainer(s).
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=141936

Committed to USB P4.

http://p4web.freebsd.org/chv.cgi?CH=172191

--HPS

------------------------------

Message: 10
Date: Fri, 25 Dec 2009 11:37:42 +1030
From: "Daniel O'Connor" <doco...@gsoft.com.au>
Subject: libusb-config missing?
To: freeb...@freebsd.org
Message-ID: <200912251137....@gsoft.com.au>
Content-Type: text/plain; charset="utf-8"

Would it be possible to create a libusb-config shell script and install
it in /usr/bin?

libusb from ports installed such a script and it is the standard way to
find libusb and know how to call it.

I suspect that adding it would also reduce patches for a lot of ports
(and this makes it easier when you are trying stuff direct from the
maintainer as you don't need a local patch)

--
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
-- Andrew Tanenbaum
GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 188 bytes
Desc: This is a digitally signed message part.
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20091225/ae28e093/attachment-0001.pgp

------------------------------

Message: 11
Date: Fri, 25 Dec 2009 10:06:26 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: libusb-config missing?
To: freeb...@freebsd.org
Cc: Daniel O'Connor <doco...@gsoft.com.au>
Message-ID: <200912251006....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Friday 25 December 2009 02:07:42 Daniel O'Connor wrote:
> Would it be possible to create a libusb-config shell script and install
> it in /usr/bin?

I guess if other generic FreeBSD libraries don't do this, it will be hard I
guess.

You mean that we create a .pc file for libusb ?

--HPS

------------------------------

Message: 12
Date: Fri, 25 Dec 2009 20:58:51 +1030
From: "Daniel O'Connor" <doco...@gsoft.com.au>
Subject: Re: libusb-config missing?
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freeb...@freebsd.org
Message-ID: <200912252058....@gsoft.com.au>
Content-Type: text/plain; charset="iso-8859-15"

On Fri, 25 Dec 2009, Hans Petter Selasky wrote:
> On Friday 25 December 2009 02:07:42 Daniel O'Connor wrote:
> > Would it be possible to create a libusb-config shell script and
> > install it in /usr/bin?
>
> I guess if other generic FreeBSD libraries don't do this, it will be
> hard I guess.

That is true but I think this is a special case as libusb is widely
regarded as an external library by software devs.

> You mean that we create a .pc file for libusb ?

Hmm, I meant the libusb-config shell script but I guess the .pc file
would be necessary too :(

------------------------------

Message: 13
Date: Fri, 25 Dec 2009 12:44:45 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: libusb-config missing?
To: "Daniel O'Connor" <doco...@gsoft.com.au>
Cc: freeb...@freebsd.org
Message-ID: <200912251244....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Friday 25 December 2009 11:28:51 Daniel O'Connor wrote:
> On Fri, 25 Dec 2009, Hans Petter Selasky wrote:
> > On Friday 25 December 2009 02:07:42 Daniel O'Connor wrote:
> > > Would it be possible to create a libusb-config shell script and
> > > install it in /usr/bin?
> >

Can you provide a pseudo-libusb port patch for this?

--HPS

------------------------------

Message: 14
Date: Sun, 27 Dec 2009 14:40:03 GMT
From: plasmaball <plasm...@gmail.com>
Subject: Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs
update: Please add JMicron's entry
To: freeb...@FreeBSD.org
Message-ID: <200912271440....@freefall.freebsd.org>

The following reply was made to PR usb/137616; it has been noted by GNATS.

From: plasmaball <plasm...@gmail.com>
To: bug-fo...@FreeBSD.org, go...@on-link.jp
Cc:
Subject: Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs update:
Please add JMicron's entry
Date: Sun, 27 Dec 2009 22:08:28 +0800

I second on this patch. I have a usb2sata transmission line, which
uses the same chip. Before applying the patch, my fbsd 8-p1 box
generated a lot of the following errors:

kernel: g_vfs_done():da0s1d[READ(offset=-2274851640486166528,
length=16384)]error = 5
kernel: g_vfs_done():da0s1d[READ(offset=8863643100058288128,
length=16384)]error = 5
kernel: g_vfs_done():da0s1d[READ(offset=6140769717801367552,
length=16384)]error = 5

and made the hdd inaccessible. Only newfs would make it working
again, but the error would happen again.

After applying the patch, the usb2sata line worked fine. I strongly
suggest accepting the patch!

--

plasma

------------------------------

Message: 15
Date: Sun, 27 Dec 2009 17:12:49 -0200
From: Vinicius Abrahao <vinni...@gmail.com>
Subject: Re: RELENG_8 + UPS USB Interface + NUT
To: freeb...@freebsd.org
Message-ID:
<1e31c7980912271112p5a6...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hey guys,

No one had problems with UPS/stats recently?

Thanks, and sorry for insistence!

best hollyday's regards,
vinnix

------------------------------

Message: 16
Date: Sun, 27 Dec 2009 22:00:18 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs
update: Please add JMicron's entry
To: freeb...@freebsd.org, plasmaball <plasm...@gmail.com>
Message-ID: <200912272200....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Sunday 27 December 2009 15:40:03 plasmaball wrote:
> The following reply was made to PR usb/137616; it has been noted by GNATS.
>
> From: plasmaball <plasm...@gmail.com>
> To: bug-fo...@FreeBSD.org, go...@on-link.jp
> Cc:
> Subject: Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs update:
> Please add JMicron's entry
> Date: Sun, 27 Dec 2009 22:08:28 +0800
>
> I second on this patch. I have a usb2sata transmission line, which
> uses the same chip. Before applying the patch, my fbsd 8-p1 box
> generated a lot of the following errors:
>
> kernel: g_vfs_done():da0s1d[READ(offset=-2274851640486166528,
> length=16384)]error = 5
> kernel: g_vfs_done():da0s1d[READ(offset=8863643100058288128,
> length=16384)]error = 5
> kernel: g_vfs_done():da0s1d[READ(offset=6140769717801367552,
> length=16384)]error = 5
>
> and made the hdd inaccessible. Only newfs would make it working
> again, but the error would happen again.
>
> After applying the patch, the usb2sata line worked fine. I strongly
> suggest accepting the patch!
>

Hi,

The quirks framework for USB enclosures is being reworked.

Please keep an eye on 9-current for the following patches:

http://p4web.freebsd.org/chv.cgi?CH=171910

http://p4web.freebsd.org/chv.cgi?CH=172130

--HPS

------------------------------

Message: 17
Date: Mon, 28 Dec 2009 02:00:56 +0100
From: Torfinn Ingolfsen <torfinn....@broadpark.no>
Subject: Re: usb thermometer - TEMPer - FreeBSD
To: freeb...@freebsd.org
Message-ID: <20091228020056.9d2df...@broadpark.no>
Content-Type: text/plain; charset=US-ASCII

On Tue, 03 Nov 2009 22:56:57 +0100
Hans Petter Selasky <hsel...@c2i.net> wrote:

> On Tuesday 03 November 2009 22:27:03 Torfinn Ingolfsen wrote:
> > But where is ucom0?
> > root@kg-t2# ls -l /dev/uc*
> > ls: /dev/uc*: No such file or directory
> > root@kg-t2# ls -l /dev/ucom0
> > ls: /dev/ucom0: No such file or directory
> > root@kg-t2# ls -l /dev/ucom0
>
> /dev/cuaU0

Ok, I have done some more testing with the TEMPer. I have kldloaded uchcom.
root@testhost-1# uname -a
FreeBSD testhost-1.kg4.no 8.0-STABLE FreeBSD 8.0-STABLE #0: Sat Dec 12 23:49:41 CET 2009 ro...@testhost-1.kg4.no:/usr/obj/usr/src/sys/GENERIC amd64
In /var/log/messages:
Dec 27 23:07:43 testhost-1 kernel: ugen1.2: <vendor 0x4348> at usbus1
Dec 27 23:07:43 testhost-1 kernel: ucom0: <vendor 0x4348 USB-SER!, rev 1.10/2.50, addr 2> on usbus1
Dec 27 23:07:43 testhost-1 kernel: ucom0: CH340 detected
I took TEMPer.c[1] from Tollef Fog Heen's site, changed the device from /dev/ttyUSB0 to /dev/ttyU0 and compiled with

gcc -lm -o TEMPer2 TEMPer2.c

and tested it:
root@testhost-1# ./TEMPer2
Init starting
Init done
^Croot@testhost-1#
It hangs after "Init done" until I break out of it with Ctrl-C. This is strange, the same code works fine un Linux:
tingo@kg-home:~$ uname -a
Linux kg-home 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 i686 GNU/Linux
tingo@kg-home:~$ ~/work/temper/TEMPer
Init starting
Init done
Getting temperature done 0001100010000000. 24.500000
Getting temperature done 0001100010000000. 24.500000
Getting temperature done 0001100010000000. 24.500000
Getting temperature done 0001100100000000. 25.000000
Getting temperature done 0001100010000000. 24.500000
Getting temperature done 0001100000000000. 24.000000
Getting temperature done 0001100000000000. 24.000000
Getting temperature done 0001100010000000. 24.500000
Getting temperature done 0001100010000000. 24.500000
Getting temperature done 0001100100000000. 25.000000
^C

I wonder if it is the driver in FreeBSD or something different in the tty initialization?
Anyway, I have made a FreeBSD[2] and a Linux[3] page with all the details.

References:
1) http://err.no/src/TEMPer.c
2) http://sites.google.com/site/tingox/temper_freebsd
3) http://sites.google.com/site/tingox/temper_xubuntu
--
Regards,
Torfinn Ingolfsen

------------------------------

Message: 18
Date: Mon, 28 Dec 2009 11:07:09 GMT
From: FreeBSD bugmaster <bugm...@FreeBSD.org>
Subject: Current problem reports assigned to freeb...@FreeBSD.org
To: freeb...@FreeBSD.org
Message-ID: <200912281107....@freefall.freebsd.org>

Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker Resp. Description
--------------------------------------------------------------------------------
o usb/141936 usb [usbdevs] [patch] add support for Advanced W-ZERO3[ES]
o usb/141918 usb ehci_interrupt: unrecoverable error, controller halted
o usb/141680 usb [uath] Netgear WG111T not working with uath driver
o usb/141664 usb [pcm] Logitech USB microphone failure [regression]
o usb/141474 usb [boot] FreeBSD 8.0 can not install from USB CDROM driv
o usb/141467 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter
o usb/141327 usb [ukbd] [usb67] USB kbd not working with 7.1+PAE on IBM
o usb/141313 usb [usb8] nvidia USB 2.0 controller - stops copying on US
o usb/141212 usb [ukbd] [usb8] ukbd_set_leds_callback:700: error=USB_ER
o usb/140928 usb [u3g] [usb8] [patch] ZTE CDMA2000 1X EV-DO (MG478/AC87
o usb/140920 usb [install] USB based install fails on 8.0-RELEASE [regr
o usb/140893 usb [urtw] [usb8] WPA2 not working on rtl8187b
f usb/140883 usb [axe] [usb8] USB gigabit ethernet hangs after short pe
o kern/140849 usb [ums] [usb8] USB mouse doesn't work under FreeBSD 8.0-
a usb/140810 usb [uftdi] [usb8] 8.X copy and paste problem / tty overfl
f usb/140714 usb [hang] [usb8] system freeze when disconect my flash us
o kern/140614 usb [uplcom] [patch] adding support for Radio Shack Gigwar
o usb/140590 usb [bluetooth] [usb8] ng_ubt(4) ng_l2cap_process_cmd_rej
o usb/140477 usb [umass] [usb8] [patch] allow boot-time attachment of d
o usb/140259 usb [libusb] [patch] [usb8] libusb-1.0 portability/compati
o usb/140236 usb [msdosfs] [usb8] Labels wiped on external Journaled US
o usb/140160 usb [usb8] [acpi] USB ports are no longer "active" after A
a usb/139990 usb [panic] [patch] [usb67] Kernel frequently panics after
a usb/139598 usb [umass] [usb8] CAM reports "xptioctl: put "device pass
o usb/139243 usb [uhci] [usb67] unplug prolific USB serial -> uhci_abor
o usb/139142 usb [ehci] [usb8] [patch] ehci drivers (NVIDIA nForce4 USB
o usb/138915 usb [patch] [usb8] [usb67] add support for SheevaPlug seri
a usb/138904 usb [rum] [panic] [usb67] unpluging USB wifi card panics s
f usb/138882 usb [ohci] [panic] [usb67] Can't install FreeBSD 7.2 due t
a usb/138879 usb [uftdi] [patch] Patch to add support for CTI USB-Mini
o usb/138798 usb [boot] [usb8] 8.0-BETA4 can't boot from USB flash driv
o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT
o usb/138570 usb [usb] [panic] USB mass device panics current 7.2-STABL
o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit
o usb/138172 usb [u3g] [patch] [usb67] Additional dev id for u3g (Optio
o usb/138138 usb [u3g] [patch] [usb67] Novatel U760 for u3g (Verizon an
o usb/138124 usb [usbaudio] [usb8] Axed uaudio functionality in the usb
o usb/138119 usb [usb67] [usb8] MultiBay CDROM (probably on USB bus) is
o usb/137872 usb [usb67] [boot] slow booting on usb flash drive
f usb/137848 usb [panic] [usb67] Page fault when using an USB bluetooth
o usb/137806 usb [ukbd] [usb67] USB keyboard doesn't work until it's un
o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no
o usb/137616 usb [usb67][usb8][usbdevs] [patch]: usbdevs update: Please
o usb/137377 usb [usb8] Support for Huawei E180
o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro
p usb/137226 usb [usb67][patch] quirk for Philips extern USB disk
o usb/137190 usb [usb8][patch] inhibit spurious button releases for som
o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo
p usb/137188 usb [usb8][patch] correctly handle USB report descriptors
o usb/137129 usb [ums] [usb8] SteelSeries Ikari USB laser mouse not att
p usb/136761 usb [usbdevs][usb67][patch] Teach usbdevs / u3g(4) about H
o usb/135938 usb [aue] [usb67] aue driver only passes traffic in promis
f usb/135857 usb [urtw] [usb67] RTL8187 Wireless Adapter
o usb/135575 usb [usbdevs] [patch] [usb67] Add HTC Wizard phone vid/pid
o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa
p usb/135372 usb [usb67][umass] Quirk report for Teclast TL-C300 usb me
o usb/135348 usb [umass] USB Drive Hangs with ZFS (JMicron USB2/eSata)
o usb/135206 usb machine reboots when inserted USB device
o usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu
o usb/135182 usb UMASS quirk - Olympus FE20 camera
o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible
o usb/134633 usb Add support for WILLCOM03(SHARP smart phone)
o usb/134631 usb [usbdevs] [patch] WiSPY DBx support requires usb tweak
o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g
o usb/134193 usb System freeze on usb MP3 player insertion
o usb/134117 usb [Patch] Add support for 'Option GlobeTrotter HSDPA Mod
o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive
o usb/133989 usb [newusb] [ukbd] USB keyboard dead at mountroot> prompt
o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa
o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache
o usb/133296 usb [rum] driver not working properly in hostap mode
p usb/132799 usb [usb][patch]GENESYS USB2IDE requires NO_SYNCHRONIZE_CA
o usb/132785 usb [usb] [patch] Gemtech remote powersocket is classed as
o usb/132594 usb USB subsystem causes page fault and crashes
o usb/132312 usb Xorg 7.4 halts USB controller
o usb/132080 usb [patch] [usb] [rum] Kernel panic after NOMEM caused by
o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760
o usb/132036 usb [panic] page fault when connecting Olympus C740 camera
o usb/131912 usb [uslcom] [patch] New devices using Silicon Labs chips
o usb/131900 usb [usbdevs] [patch] Additional product identification co
o usb/131583 usb [umass] Failure when detaching umass Device
o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data
o usb/131521 usb Registering Belkin UPS to usb_quirks.c
o usb/131123 usb [patch] re-add UQ_ASSUME_CM_OVER_DATA USB quirk
o usb/131074 usb no run-time detection of usb devices plugged into exte
o usb/130736 usb Page fault unplugging USB stick
o usb/130230 usb Samsung Electronics YP-U3 does not attach in 7.1-RELEA
o usb/130208 usb Boot process severely hampered by umass0 error
o usb/130122 usb [newusb] DVD drive detects as 'da' device
o usb/129945 usb [usbdevs] [patch] add u3g support for Longcheer WM66 U
o usb/129766 usb [usb] plugging in usb modem HUAWEI E226 panics system
o usb/129758 usb [uftdi] [patch] add Pyramid LCD usb support
o usb/129673 usb [uhci] uhci (uhub) confused on replugging USB 1.1 scan
o usb/129522 usb [ubsa] [patch] add support for ZTE AC8700 modem
o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis
o usb/129311 usb [usb] [panic] Instant crash with an USB card reader
o usb/129251 usb [usbdevs] [patch] Liebert UPS being assigned uhid and
o usb/129173 usb [uplcom] [patch] Add support for Corega CG-USBRS232R a
s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa
o usb/128977 usb [usb] [patch] uaudio is not full duplex
o usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2
o usb/128485 usb [umodem] [patch] Nokia N80 modem support
o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive
o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like
o usb/128324 usb [uplcom] [patch] remove baud rate restriction for PL23
o usb/127980 usb [umass] [patch] Fix Samsung YP U2 MP3 player on 7.x an
o usb/127926 usb [boot] USB Timeout during bootup
p usb/127549 usb [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requi
s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should
o usb/127423 usb [boot] BTX halted on Gigabyte GA-MA69VM-S2 / AMD Sempr
o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support
o usb/127248 usb [ucom] panic while uplcom devices attaach and detach
o usb/127222 usb [ohci] Regression in 7.0 usb storage generic driver
o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c
o usb/126848 usb [usb]: USB Keyboard hangs during Installation
o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be
o usb/126519 usb [usb] [panic] panic when plugging in an iphone
o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device
o usb/125736 usb [ukbd] [hang] system hangs after AT keyboard detect if
o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite
o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d
o usb/125450 usb [panic] Removing USB flash card while being accessed c
o usb/125238 usb [ums] Habu Mouse turns off in X
o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U
o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi
o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe
o usb/124758 usb [rum] [panic] rum panics SMP kernel
o usb/124708 usb [panic] Kernel panic on USB KVM reattach
o usb/124604 usb [ums] Microsoft combo wireless mouse doesn't work
o kern/124130 usb [usb] gmirror fails to start usb devices that were pre
o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile
o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with
o usb/123691 usb usbd(8): usbd hangs
o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l
o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U
o usb/123509 usb [umass] continuous reset Samsung SGH-G600 phone
o usb/123352 usb [usbdevs] [patch] Add Option GTMAX3.6/7.2 and Quallcom
o usb/123351 usb [usbdevs] [patch] Add Reiner SCT cyberJack, Omnikey [2
o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um
o usb/122956 usb [ubsa] [patch] add support for Novatel Wireless XU870
o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt
o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa
o usb/122819 usb [usb] [patch] Patch to provide dynamic additions to th
o usb/122813 usb [udbp] [request] udbp driver should be removed in favo
o usb/122621 usb [new driver] [patch] New driver for Sierra Wireless 3G
o usb/122547 usb [ehci] USB Printer not being recognized after reboot
o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci
o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE
o usb/122119 usb [umass] umass device causes creation of daX but not da
o usb/122025 usb [uscanner] [patch] uscanner does not attach to Epson R
o usb/121755 usb [ohci] [patch] Fix panic after ohci/uhub cardbus devic
o usb/121734 usb [ugen] ugen HP1022 printer device not working since up
o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k
o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard
o usb/121426 usb [patch] [uscanner] add HP ScanJet 3570C
o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s
o usb/121232 usb [usb] [panic] USB CardBus card removal causes reboot s
p usb/121184 usb [uipaq] [patch] add ids from linux ipaq driver (plus a
o usb/121169 usb [umass] Issues with usb mp3 player
o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS
o usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det
o usb/120729 usb [panic] fault while in kernel mode with connecting USB
o usb/120572 usb [umass] [patch] quirk to support ASUS P535 as umass (a
o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo
o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou
o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5
o usb/119981 usb [axe] [patch] add support for LOGITEC LAN-GTJ/U2 gigab
o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou
o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch
o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression]
o usb/119513 usb [irq] inserting dlink dwl-g630 wireless card results i
o usb/119509 usb [usb] USB flaky on Dell Optiplex 755
o usb/119481 usb [hang] FreeBSD not responding after connecting USB-Mas
o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress
o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun
o usb/119201 usb [cam] [patch] Quirks for Olympus FE-210 camera, LG and
o usb/118485 usb [usbdevs] [patch] Logitech Headset Workaround
o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer
o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se
o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread
o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi
o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin
o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS
o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE
o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS
o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work
o usb/117893 usb [umass] Lacie USB DVD writing failing
o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory
o usb/117598 usb [uaudio] [patch] Not possible to record with Plantroni
o usb/117313 usb [umass] [panic] panic on usb camera insertion
o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach
o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a
o usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th
o usb/116699 usb [usbhid] USB HID devices do not initialize at system b
o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee
o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300
o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches
o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter
o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI
o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel
o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui
o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco
o usb/114682 usb [umass] generic USB media-card reader unusable
o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker
o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection
o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff
o usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in
o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated
s usb/108344 usb [usb67] [atausb] [panic] kernel with atausb panics whe
o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found
o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device
o usb/107243 usb [usb67] [cam] [quirk] [patch] Apacer USB Flash Drive q
o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu
o usb/105361 usb [usb67] [panic] Kernel panic during unmounting mass st
s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never
o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil
o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele
o usb/101775 usb [usb67] [usb8] [libusbhid] [patch] possible error in r
o usb/101761 usb [usb67] [patch] [request] usb.h: increase maximal size
o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar
o usb/99538 usb [keyboard] while using USB keyboard default params of
o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar
o kern/99200 usb [bluetooth] SMP-Kernel crashes reliably when Bluetooth
o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3
o usb/97472 usb [cam] [patch] add support for Olympus C150,D390
s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2.
o usb/97175 usb [umass] [hang] USB cardreader hangs system
o usb/96457 usb [umass] [panic] fatback on umass = reboot
o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram
o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync
s usb/96120 usb [ums] [request] USB mouse not always detected
s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620
o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb
s usb/95348 usb [keyboard] USB keyboard unplug causes noise on screen
o usb/95037 usb [umass] USB disk not recognized on hot-plug.
o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk
o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI
o usb/94384 usb [panic] kernel panic with usb2 hardware
o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB
o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion
o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work
o usb/93155 usb [ulpt] /dev/ulpt0: device busy, USB printer does not w
o usb/92852 usb [ums] [patch] Vertical scroll not working properly on
o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS
o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb
o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE
o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand
o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg
o usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n
o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return "
o usb/91629 usb [usb] usbd_abort_pipe() may result in infinite loop
o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work
o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500
o usb/91283 usb [boot] [regression] booting very slow with usb devices
o usb/91238 usb [umass] USB tape unit fails to write a second tape fil
o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas
o usb/89954 usb [umass] [panic] USB Disk driver race condition?
s usb/89003 usb [request] LaCie Firewire drive not properly supported
o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg
o usb/88408 usb [axe] axe0 read PHY failed
o usb/87648 usb [mouse] Logitech USB-optical mouse problem.
o usb/87224 usb [usb] Cannot mount USB Zip750
o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the
o usb/86298 usb [mouse] Known good USB mouse won't work with correct s
s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device
f usb/84750 usb [hang] 6-BETA2 reboot/shutdown with root_fs on externa
s usb/84336 usb [usb] [reboot] instant system reboot when unmounting a
o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN
o usb/83863 usb [ugen] Communication problem between opensc/openct via
o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe
o usb/83563 usb [umass] [panic] Page Fault while detaching Mpman Usb d
o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent
o usb/82660 usb [ehci] [panic] EHCI: I/O stuck in state 'physrd'/panic
s usb/82569 usb [umass] [panic] USB mass storage plug/unplug causes sy
o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected
o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack
o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci
o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55.
o usb/80862 usb [patch] USB locking issues: missing some Giant calls
o usb/80854 usb [patch] [request] suggestion for new iface-no-probe me
o usb/80829 usb [modules] [panic] possible panic when loading USB-modu
s usb/80777 usb [request] usb_rem_task() should wait for callback to c
s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_
o usb/80774 usb [patch] have "usbd_find_desc" in line with the other "
o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails
o usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze
o usb/79723 usb [usb] [request] prepare for high speed isochronous tra
o usb/79722 usb [ehci] wrong alignments in ehci.h
a usb/79656 usb [ehci] RHSC interrupts lost
o usb/79524 usb [ulpt] printing to Minolta PagePro 1[23]xxW via USB fa
o usb/79287 usb [uhci] [hang] UHCI hang after interrupt transfer
o usb/79269 usb [ohci] USB ohci da0 plug/unplug causes crashes and loc
o usb/78984 usb [umass] [patch] Creative MUVO umass failure
o usb/77294 usb [ucom] [panic] ucom + ulpcom panic
o usb/77184 usb [umass] [panic] kernel panic on USB device disconnect,
o usb/76732 usb [ums] Mouse problems with USB KVM Switch
o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device
o usb/76461 usb [umass] disklabel of umass(4)-CAM(4)-da(4) not used by
o usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0
s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade
o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn
o usb/75797 usb [sound] [regression] 5.3-STABLE(2005 1/4) detect USB h
o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for
o usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace)
o usb/74771 usb [umass] [hang] mounting write-protected umass device a
s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL
o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R
o usb/73307 usb [panic] Kernel panics on USB disconnect
s usb/72733 usb [ucom] [request] Kyocera 7135 Palm OS connection probl
o usb/71455 usb [umass] Slow USB umass performance of 5.3
o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati
o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n
o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1
o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes
o usb/70523 usb [umct] [patch] umct sending/receiving wrong characters
o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports
o usb/68232 usb [ugen] [patch] ugen(4) isochronous handling correction
o usb/67301 usb [uftdi] [panic] RTS and system panic
o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct
o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes
s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s
o usb/59698 usb [keyboard] [patch] Rework of ukbd HID to AT code trans
s bin/57255 usb [patch] usbd(8) and multi-function devices
s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2
s usb/51958 usb [urio] [patch] update for urio driver
o i386/46371 usb USB controller cannot be initialized on IBM Netfinity
o usb/40948 usb [umass] [request] USB HP CDW8200 does not work
o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem

328 problems total.

------------------------------

Message: 19
Date: Mon, 28 Dec 2009 19:44:40 +0800
From: plasmaball <plasm...@gmail.com>
Subject: Re: usb/137616: [usb67][usb8][usbdevs] [patch]: usbdevs
update: Please add JMicron's entry
To: Hans Petter Selasky <hsel...@c2i.net>
Cc: freeb...@freebsd.org
Message-ID:
<88b3aaf20912280344t5ed...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

On Mon, Dec 28, 2009 at 5:00 AM, Hans Petter Selasky <hsel...@c2i.net> wrote:
> Hi,
>
> The quirks framework for USB enclosures is being reworked.
>
> Please keep an eye on 9-current for the following patches:
>
> http://p4web.freebsd.org/chv.cgi?CH=171910
>
> http://p4web.freebsd.org/chv.cgi?CH=172130

Both of the links gave me "//chv.cgi - must refer to client 'none'. "
message... Anything I need to set up first?

plasma

------------------------------

Message: 20
Date: Mon, 28 Dec 2009 19:28:28 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb thermometer - TEMPer - FreeBSD
To: freeb...@freebsd.org
Message-ID: <200912281928....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-1"

On Monday 28 December 2009 02:00:56 Torfinn Ingolfsen wrote:
> On Tue, 03 Nov 2009 22:56:57 +0100
>
> Hans Petter Selasky <hsel...@c2i.net> wrote:
> > On Tuesday 03 November 2009 22:27:03 Torfinn Ingolfsen wrote:
> > > But where is ucom0?
> > > root@kg-t2# ls -l /dev/uc*
> > > ls: /dev/uc*: No such file or directory
> > > root@kg-t2# ls -l /dev/ucom0
> > > ls: /dev/ucom0: No such file or directory
> > > root@kg-t2# ls -l /dev/ucom0
> >
> > /dev/cuaU0
>
> Ok, I have done some more testing with the TEMPer. I have kldloaded uchcom.
> root@testhost-1# uname -a
> FreeBSD testhost-1.kg4.no 8.0-STABLE FreeBSD 8.0-STABLE #0: Sat Dec 12
> 23:49:41 CET 2009 ro...@testhost-1.kg4.no:/usr/obj/usr/src/sys/GENERIC
> amd64 In /var/log/messages:
> Dec 27 23:07:43 testhost-1 kernel: ugen1.2: <vendor 0x4348> at usbus1
> Dec 27 23:07:43 testhost-1 kernel: ucom0: <vendor 0x4348 USB-SER!, rev
> 1.10/2.50, addr 2> on usbus1 Dec 27 23:07:43 testhost-1 kernel: ucom0:
> CH340 detected
> I took TEMPer.c[1] from Tollef Fog Heen's site, changed the device from
> /dev/ttyUSB0 to /dev/ttyU0 and compiled with
>
> gcc -lm -o TEMPer2 TEMPer2.c
>
> and tested it:
> root@testhost-1# ./TEMPer2
> Init starting
> Init done
> ^Croot@testhost-1#
> It hangs after "Init done" until I break out of it with Ctrl-C. This is
> strange, the same code works fine un Linux: tingo@kg-home:~$ uname -a
> Linux kg-home 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009
> i686 GNU/Linux tingo@kg-home:~$ ~/work/temper/TEMPer
> Init starting
> Init done
> Getting temperature done 0001100010000000. 24.500000
> Getting temperature done 0001100010000000. 24.500000
> Getting temperature done 0001100010000000. 24.500000
> Getting temperature done 0001100100000000. 25.000000
> Getting temperature done 0001100010000000. 24.500000
> Getting temperature done 0001100000000000. 24.000000
> Getting temperature done 0001100000000000. 24.000000
> Getting temperature done 0001100010000000. 24.500000
> Getting temperature done 0001100010000000. 24.500000
> Getting temperature done 0001100100000000. 25.000000
> ^C
>
> I wonder if it is the driver in FreeBSD or something different in the tty
> initialization? Anyway, I have made a FreeBSD[2] and a Linux[3] page with
> all the details.
>
> References:
> 1) http://err.no/src/TEMPer.c
> 2) http://sites.google.com/site/tingox/temper_freebsd
> 3) http://sites.google.com/site/tingox/temper_xubuntu

Hi,

I think you need to turn off line buffering on stdin/stdout. There should be
an ioctl somewhere.

--HPS

------------------------------

Message: 21
Date: Wed, 30 Dec 2009 22:33:08 +0200
From: ???????? ???????? <tymph...@gmail.com>
Subject: Fwd: My first question
To: freeb...@freebsd.org
Message-ID:
<e9ae3b290912301233j101...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-7

---------- �� ----------
��: �� <tymph...@gmail.com>
��: 30 �� 2009 9:41 �.�.
��: My first question
��: freeb...@freebsd.org

Hello!

Please, i need help to know if i can connect my new FreeBSD 8 to the
internet, using usb modem zte 636. Thank you.

kind regards
George

------------------------------

Message: 22
Date: Thu, 31 Dec 2009 01:00:12 GMT
From: dfi...@FreeBSD.ORG (dfilter service)
Subject: Re: usb/141936: commit references a PR
To: freeb...@FreeBSD.org
Message-ID: <200912310100....@freefall.freebsd.org>

The following reply was made to PR usb/141936; it has been noted by GNATS.

From: dfi...@FreeBSD.ORG (dfilter service)
To: bug-fo...@FreeBSD.org
Cc:
Subject: Re: usb/141936: commit references a PR
Date: Thu, 31 Dec 2009 00:56:05 +0000 (UTC)

Author: thompsa
Date: Thu Dec 31 00:55:50 2009
New Revision: 201318
URL: http://svn.freebsd.org/changeset/base/201318

Log:
Add new device ID to uipaq driver

PR: usb/141936
Submitted by: HASHI Hiroaki

Modified:
head/sys/dev/usb/serial/uipaq.c
head/sys/dev/usb/usbdevs

Modified: head/sys/dev/usb/serial/uipaq.c
==============================================================================
--- head/sys/dev/usb/serial/uipaq.c Thu Dec 31 00:30:45 2009 (r201317)
+++ head/sys/dev/usb/serial/uipaq.c Thu Dec 31 00:55:50 2009 (r201318)
@@ -1015,6 +1015,8 @@ static const struct usb_device_id uipaq_
/**/
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WZERO3ES, 0)},
/**/
+ {USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WZERO3ADES, 0)},
+ /**/
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WILLCOM03, 0)},
/* Symbol USB Sync */
{USB_VPI(USB_VENDOR_SYMBOL, 0x2000, 0)},

Modified: head/sys/dev/usb/usbdevs
==============================================================================
--- head/sys/dev/usb/usbdevs Thu Dec 31 00:30:45 2009 (r201317)
+++ head/sys/dev/usb/usbdevs Thu Dec 31 00:55:50 2009 (r201318)
@@ -2405,6 +2405,7 @@ product SHARP SL5600 0x8006 Zaurus SL-5
product SHARP SLC700 0x8007 Zaurus SL-C700 PDA
product SHARP SLC750 0x9031 Zaurus SL-C750 PDA
product SHARP WZERO3ES 0x9123 W-ZERO3 ES Smartphone
+product SHARP WZERO3ADES 0x91ac Advanced W-ZERO3 ES Smartphone
product SHARP WILLCOM03 0x9242 WILLCOM03

/* Shuttle Technology products */
_______________________________________________
svn-s...@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all...@freebsd.org"

------------------------------

Message: 23
Date: Sat, 2 Jan 2010 02:29:28 +0100
From: Stefan Bethke <s...@lassitu.de>
Subject: Re: usb thermometer - TEMPer - FreeBSD
To: Torfinn Ingolfsen <torfinn....@broadpark.no>
Cc: freeb...@freebsd.org
Message-ID: <47AC02B2-8DC2-4F32...@lassitu.de>
Content-Type: text/plain; charset=us-ascii

Am 28.12.2009 um 02:00 schrieb Torfinn Ingolfsen:

> Ok, I have done some more testing with the TEMPer.

I get one of the TEMPers from Brando some months ago, and finally managed to put a small command line utility together: http://wiki.zs64.net/TEMPer_USB_Thermometer

I did look at the sample code in http://err.no/src/TEMPer.c, but decided to start from scratch, using the LM75 data sheet. On my 8-stable box it's working just fine, also in VMware with -current. I did have to reduce the IIC clock frequency down to 100 Hz to get it work in a stable fashion though.

Stefan

--
Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811

------------------------------

Message: 24
Date: Sat, 2 Jan 2010 10:27:12 +1100
From: Peter Jeremy <peter...@acm.org>
Subject: Re: Fwd: My first question
To: ???????? ???????? <tymph...@gmail.com>
Cc: freeb...@freebsd.org
Message-ID: <20100101232...@server.vk2pj.dyndns.org>
Content-Type: text/plain; charset="us-ascii"

On 2009-Dec-30 22:33:08 +0200, ???????? ???????? <tymph...@gmail.com> wrote:
>Please, i need help to know if i can connect my new FreeBSD 8 to the
>internet, using usb modem zte 636. Thank you.

I notice there don't seem to have been any responses to your question.
Whilst I can't answer it either, you might try ask in freebsd-questions.

--
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20100102/ffe56530/attachment-0001.pgp

------------------------------

Message: 25
Date: Sat, 2 Jan 2010 03:33:59 GMT
From: Thomas Ward <thoma...@fastmail.fm>
Subject: usb/142225: [patch] Patch to add Quirk for Western Digital
Mybook
To: freebsd-gn...@FreeBSD.org
Message-ID: <201001020333....@www.freebsd.org>

>Number: 142225
>Category: usb
>Synopsis: [patch] Patch to add Quirk for Western Digital Mybook
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Jan 02 03:40:02 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Thomas Ward
>Release: 8-Stable
>Organization:
>Environment:
FreeBSD daemollo 8.0-STABLE FreeBSD 8.0-STABLE #0: Fri Jan 1 20:04:41 EST 2010 thomas@daemollo:/usr/obj/usr/src/sys/USB amd64
>Description:
My western digital mybook external usb drive with idVendor=0x1058 and idProduct=0x0901 did work when a zpool was added to the drive due to it not having a synchronize cache. Adding the quirk 0x4000, UQ_MSC_NO_SYNC_CACHE, to usb_quirk.c and recompiling the kernel fixes the issue and ZFS works flawlessly. I've attached a patch that adds the quirk.
>How-To-Repeat:
Create a zpool on Western Digital Mybook external harddrive.
>Fix:
Apply patch to add UQ_MSC_NO_SYNC_CACHE quirk and recompile kernel.

Patch attached with submission follows:

Index: sys/dev/usb/quirk/usb_quirk.c
===================================================================
--- sys/dev/usb/quirk/usb_quirk.c (revision 201317)
+++ sys/dev/usb/quirk/usb_quirk.c (working copy)
@@ -413,7 +413,8 @@ static struct usb_quirk_entry usb_quirks
UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_FORCE_SHORT_INQ,
UQ_MSC_NO_START_STOP, UQ_MSC_IGNORE_RESIDUE),
USB_QUIRK(WESTERN, MYBOOK, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
- UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_INQUIRY_EVPD),
+ UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_INQUIRY_EVPD,
+ UQ_MSC_NO_SYNC_CACHE),
USB_QUIRK(WESTERN, MYPASSWORD, 0x0000, 0xffff, UQ_MSC_FORCE_SHORT_INQ),
USB_QUIRK(WINMAXGROUP, FLASH64MC, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_INQUIRY),

>Release-Note:
>Audit-Trail:
>Unformatted:

------------------------------

Message: 26
Date: Sat, 2 Jan 2010 18:00:48 +0100
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/142225: [patch] Patch to add Quirk for Western
Digital Mybook
To: freeb...@freebsd.org
Cc: Thomas Ward <thoma...@fastmail.fm>,
freebsd-gn...@freebsd.org
Message-ID: <201001021800....@c2i.net>
Content-Type: Text/Plain; charset="iso-8859-15"

On Saturday 02 January 2010 04:33:59 Thomas Ward wrote:
> >Number: 142225
> >Category: usb
> >Synopsis: [patch] Patch to add Quirk for Western Digital Mybook
> >Confidential: no
> >Severity: serious
> >Priority: medium
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Sat Jan 02 03:40:02 UTC 2010
> >Closed-Date:
> >Last-Modified:
> >Originator: Thomas Ward
> >Release: 8-Stable
> >Organization:
> >Environment:
>
> FreeBSD daemollo 8.0-STABLE FreeBSD 8.0-STABLE #0: Fri Jan 1 20:04:41 EST
> 2010 thomas@daemollo:/usr/obj/usr/src/sys/USB amd64
>
> >Description:
>
> My western digital mybook external usb drive with idVendor=0x1058 and
> idProduct=0x0901 did work when a zpool was added to the drive due to it not
> having a synchronize cache. Adding the quirk 0x4000, UQ_MSC_NO_SYNC_CACHE,
> to usb_quirk.c and recompiling the kernel fixes the issue and ZFS works
> flawlessly. I've attached a patch that adds the quirk.
>
> >How-To-Repeat:
>
> Create a zpool on Western Digital Mybook external harddrive.
>
> >Fix:
>
> Apply patch to add UQ_MSC_NO_SYNC_CACHE quirk and recompile kernel.
>
> Patch attached with submission follows:
>
> Index: sys/dev/usb/quirk/usb_quirk.c
> ===================================================================
> --- sys/dev/usb/quirk/usb_quirk.c (revision 201317)
> +++ sys/dev/usb/quirk/usb_quirk.c (working copy)
> @@ -413,7 +413,8 @@ static struct usb_quirk_entry usb_quirks
> UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_FORCE_SHORT_INQ,
> UQ_MSC_NO_START_STOP, UQ_MSC_IGNORE_RESIDUE),
> USB_QUIRK(WESTERN, MYBOOK, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
> - UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_INQUIRY_EVPD),
> + UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_INQUIRY_EVPD,
> + UQ_MSC_NO_SYNC_CACHE),
> USB_QUIRK(WESTERN, MYPASSWORD, 0x0000, 0xffff, UQ_MSC_FORCE_SHORT_INQ),
> USB_QUIRK(WINMAXGROUP, FLASH64MC, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
> UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_NO_INQUIRY),
>
> >Release-Note:

Committed to USB P4, See change #172479.

--HPS

------------------------------

Message: 27
Date: Sat, 2 Jan 2010 17:00:11 GMT
From: Hans Petter Selasky <hsel...@c2i.net>
Subject: Re: usb/142225: [patch] Patch to add Quirk for Western
Digital Mybook
To: freeb...@FreeBSD.org
Message-ID: <201001021700....@freefall.freebsd.org>

The following reply was made to PR usb/142225; it has been noted by GNATS.

From: Hans Petter Selasky <hsel...@c2i.net>
To: freeb...@freebsd.org
Cc: Thomas Ward <thoma...@fastmail.fm>,
freebsd-gn...@freebsd.org
Subject: Re: usb/142225: [patch] Patch to add Quirk for Western Digital Mybook
Date: Sat, 2 Jan 2010 18:00:48 +0100

------------------------------

Message: 28
Date: Sat, 2 Jan 2010 17:25:29 GMT
From: lin...@FreeBSD.org
Subject: Re: usb/142228: [usbdevs] [patch] add a USB-HDD to
usb_quirk.c and usbdevs
To: lin...@FreeBSD.org, freebs...@FreeBSD.org,
freeb...@FreeBSD.org
Message-ID: <201001021725....@freefall.freebsd.org>

Old Synopsis: [PATCH] add a USB-HDD to usb_quirk.c and usbdevs
New Synopsis: [usbdevs] [patch] add a USB-HDD to usb_quirk.c and usbdevs

Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
Responsible-Changed-By: linimon
Responsible-Changed-When: Sat Jan 2 17:24:52 UTC 2010
Responsible-Changed-Why:
Over to maintainer(s).

http://www.freebsd.org/cgi/query-pr.cgi?pr=142228

------------------------------

End of freebsd-usb Digest, Vol 269, Issue 2
*******************************************

0 new messages