Dell Inspirion 1300 doesn't wake up
Chen Xu
I searched but could not fine enough information. Here is my problem:
zzz or acpiconf -s 3 both seems working, i.e. put the laptop into
standby mode. However, it doesn't wake up -- open the lid or press on
the power button seem to have some disk activity, but nothing is on
the display.
Hardware: Dell 1300, everything works except sound card and resume.
FreeBSD: 6.2-prerelease
Anyone can point me a direction what to check?
Thanks,
-Chen
thecheekymonkey
> _______________________________________________
> freebsd...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobil...@freebsd.org"
>
>
I HAVE JUST HAD THE SAME PROBLEM, SIMLY DOWNLOAD THE LATEST BIOS UPDATE FOR
THE LAPTOP FROM DELL (A09) AND UPDATE, PROBLEM SOLVED!!!!!!!!!!!!!!!!!!!!
REGARDS AND HAPPY CHRISTMAS
--
View this message in context: http://www.nabble.com/Dell-Inspirion-1300-doesn%27t-wake-up-tf2640801.html#a8038238
Sent from the freebsd-mobile mailing list archive at Nabble.com.
Greg 'groggy' Lehey
> Chen Xu-3 wrote:
>>
>> Dear list,
>>
>> I searched but could not fine enough information. Here is my problem:
>> zzz or acpiconf -s 3 both seems working, i.e. put the laptop into
>> standby mode. However, it doesn't wake up -- open the lid or press on
>> the power button seem to have some disk activity, but nothing is on
>> the display.
>>
>> Hardware: Dell 1300, everything works except sound card and resume.
>> FreeBSD: 6.2-prerelease
>>
>> Anyone can point me a direction what to check?
>
> THE LAPTOP FROM DELL (A09) AND UPDATE, PROBLEM SOLVED!!!!!!!!!!!!!!!!!!!!
Is that the update that forces the CapsLock key on?
Greg
--
See complete headers for address and phone numbers.
Dennis Melentyev
http://people.freebsd.org/~ariff/lowlatency/
For resume - yes, it never wakes up.
2006/11/16, Chen Xu <xuch...@gmail.com>:
> _______________________________________________
> freebsd...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobil...@freebsd.org"
>
--
Dennis Melentyev
Dennis Melentyev
2006/12/24, Dennis Melentyev <dennis.m...@gmail.com>:
--
Dennis Melentyev
Chen Xu
as recently around Dec. 25, 2006, the suspension works
most of times.
For sound, I did what the link says, but got so sound coming
out the speaker, the pcm0 seems fine though.
Any more advices?
-Chen
--
Chen Xu
Brandeis University
Rosenstiel Center, MS029
Waltham, MA 02454
(Office)781-736-2469
(Fax)781-736-2419
Dennis Melentyev
Happy everything, guys'n'girls!
Suspend was working good, but does the text below mean that resume is
working also?
Let's see what do I have:
dennis@dennis > cat /boot/loader.conf
# that's for ndis driver
bcmwl5_sys_load="YES"
# this for 915resolution
#/etc/rc.local:/usr/local/bin/915resolution 34 1280 800
linux_load="YES"
# sound driver
snd_hda_load="YES"
# this for video on/off
acpi_video_load="YES"
# this is for bluetooth
ng_ubt_load="YES"
Mixer could need ajustments:
dennis@dennis > mixer
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
Mixer speaker is currently set to 75:75
Mixer line is currently set to 75:75
Mixer rec is currently set to 0:0
Recording source: mic
dennis@dennis > cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit)
Installed devices:
pcm0: <Intel 82801F High Definition Audio Controller> at memory
0xdfebc000 irq 16 kld snd_hda [20061017_0033] (1p/1r/0v channels
duplex default)
dennis@dennis > ll /dev/pcm*
ls: No match.
But sound is working (output only, no input yet)...
2006/12/31, Chen Xu <xuch...@gmail.com>:
--
Dennis Melentyev
Dennis Melentyev
Installed yesterday's RC2 - suspension/resuming work Ok. With 2
seconds delay and sysctl hw.acpi.video.lcd0.active=1 in rc.restore.
Great!
With binary sound driver from URL below (as of Dec, 23rd) - it does
not survive S3 suspension/resuming, writting series of these string
into xconsole:
pcm0: timeout in reset
pcm0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
pcm0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
pcm0: timeout in reset
pcm0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
pcm0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0
So, Chen, you could try not to mix sound with S3 suspension.
2007/1/7, Dennis Melentyev <dennis.m...@gmail.com>:
--
Dennis Melentyev
Chen Xu
> Kind of status update:
>
> Installed yesterday's RC2 - suspension/resuming work Ok. With 2
> seconds delay and sysctl hw.acpi.video.lcd0.active=1 in rc.restore.
That sound good. However, I got kernel panic with recent RC2 after Dec 29th.
I reverse back to 24th src. I have now ~90% is suspension/resume.
In the other 10% times, there was no spin down sound from HDD.
>
> With binary sound driver from URL below (as of Dec, 23rd) - it does
> not survive S3 suspension/resuming, writting series of these string
> into xconsole:
I have found similar thing, after suspension/resume, I have to kldunload
and kldload snd_hda.ko to have sound back.
Chen