i386/145621: BGE watchdog timeout --resetting -> crash
Roar Pettersen
>Number: 145621
>Category: i386
>Synopsis: BGE watchdog timeout --resetting -> crash
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Apr 10 23:20:01 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Roar Pettersen
>Release: FreeBSD 8.0-STABLE
>Organization:
University of Bergen
>Environment:
FreeBSD hib-vpn-gw.hib.no 8.0-STABLE FreeBSD 8.0-STABLE #3: Sat Apr 10 23:38:27 CEST 2010
ro...@hib-vpn-gw.hib.no:/usr/obj/usr/src/sys/HIB-VPN-GW i386
>Description:
bge0@pci0:3:6:0: class=0x020000 card=0x01211028 chip=0x164514e4 rev=0x15 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'broadtcomBCM5701 Gigabit Ethernet (BCM5701)'
class = network
subclass = ethernet
bge1@pci0:3:8:0: class=0x020000 card=0x01211028 chip=0x164514e4 rev=0x15 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'broadtcomBCM5701 Gigabit Ethernet (BCM5701)'
class = network
# devinfo -rv | grep phy
brgphy0 pnpinfo oui=0x818 model=0x11 rev=0x0 at phyno=1
brgphy1 pnpinfo oui=0x818 model=0x11 rev=0x0 at phyno=1
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
I don't get a crash file in /var/crash, strange because I have this in my rc.conf :
# Add swap
tmpmfs="YES"
tmpsize="512m"
#
dumpdev="AUTO"
#
fsck_y_enable="YES"
#
background_fsck="NO"
>How-To-Repeat:
Every 15-20 minuttes I get a BGE watchdog timeout --resetting on the console, then the system reboots.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Roar Pettersen
edprp pts/0 10.0.0.1 Sun Apr 11 08:57 - crash (00:22)
reboot ~ Sun Apr 11 08:29
edprp pts/1 10.0.0.1 Sun Apr 11 07:31 - crash (00:58)
edprp pts/0 10.0.0.1 Sun Apr 11 07:30 - crash (00:58)
reboot ~ Sun Apr 11 00:59
edprp pts/1 10.0.0.1 Sun Apr 11 00:13 - crash (00:45)
edprp pts/0 10.0.0.1 Sun Apr 11 00:13 - crash (00:46)
edprp pts/1 10.0.0.1 Sat Apr 10 22:55 - crash (00:07)
edprp pts/0 10.0.0.1 Sat Apr 10 22:49 - crash (00:13)
reboot ~ Sat Apr 10 22:49
edprp pts/1 10.0.0.1 Sat Apr 10 22:37 - crash (00:12)
edprp pts/0 10.0.0.1 Sat Apr 10 22:35 - crash (00:13)
reboot ~ Sat Apr 10 22:34
edprp pts/1 10.0.0.1 Sat Apr 10 21:51 - crash (00:43)
edprp pts/0 10.0.0.1 Sat Apr 10 21:48 - crash (00:46)
reboot ~ Sat Apr 10 21:04
reboot ~ Sat Apr 10 20:45
reboot ~ Sat Apr 10 20:25
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Sun Apr 11 03:20:07 CEST 2010
ro...@hib-vpn-gw.hib.no:/usr/obj/usr/src/sys/HIB-VPN-GW i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2389.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Family = f Model = 2 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
real memory = 1073741824 (1024 MB)
avail memory = 1040519168 (992 MB)
ACPI APIC Table: <DELL PE2650 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP/HT): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE2650> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 4.0 (no driver attached)
uart2: <Non-standard ns8250 class UART with FIFOs> port 0xec80-0xecbf mem
0xfe102000-0xfe102fff,0xfeb00000-0xfeb7ffff irq 23 at device 4.1 on pci0
uart2: [FILTER]
pci0: <unknown> at device 4.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0xe800-0xe8ff mem
0xfd000000-0xfdffffff,0xfe101000-0xfe101fff at device 14.0 on pci0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8b0-0x8bf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at
device 15.2 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 8.0 on pci4
pci5: <ACPI PCI bus> on pcib2
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 30 at device 8.1 on
pci4
aac0: [FILTER]
aac0: Adaptec RAID controller, aac driver 2.1.9-1
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x000105>
mem 0xfcf10000-0xfcf1ffff irq 28 at device 6.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:06:5b:f1:c6:51
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x000105>
mem 0xfcf00000-0xfcf0ffff irq 29 at device 8.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5701 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:06:5b:f1:c6:52
bge1: [ITHREAD]
pcib4: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib5
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xec000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.953 msec
usbus0: 12Mbps Full Speed USB v1.0
acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 34712MB (71091456 sectors)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
ugen0.1: <(0x1166)> at usbus0
uhub0: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus0
uhub0: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/aacd0s1a
WARNING: / was not properly dismounted
Setting hostuuid: 44454c4c-3000-1034-8044-b8c04f52304a.
Setting hostid: 0xce7a2875.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
Starting file system checks:
/dev/aacd0s1a: 11872 files, 300053 used, 2744994 free (882 frags, 343014
blocks, 0.0% fragmentation)
/dev/aacd0s1f: 100 files, 70473 used, 4952704 free (56 frags, 619081
blocks, 0.0% fragmentation)
/dev/aacd0s1d: 296534 files, 1757907 used, 2303156 free (79628 frags,
277941 blocks, 2.0% fragmentation)
/dev/aacd0s1e: UNREF FILE I=188431 OWNER=root MODE=140666
/dev/aacd0s1e: SIZE=0 MTIME=Apr 11 09:20 2010 (CLEARED)
/dev/aacd0s1e: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/aacd0s1e: SUMMARY INFORMATION BAD (SALVAGED)
/dev/aacd0s1e: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/aacd0s1e: 1291 files, 290418 used, 3770645 free (733 frags, 471239
blocks, 0.0% fragmentation)
Mounting local file systems:
.
Setting hostname: hib-vpn-gw.hib.no
.
Starting Network: bge0 bge1 lo0.
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:06:5b:f1:c6:51
inet 158.37.73.2 netmask 0xffffff00 broadcast 158.37.73.255
media: Ethernet autoselect (none)
status: no carrier
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:06:5b:f1:c6:52
inet 10.192.1.1 netmask 0xffffff00 broadcast 10.192.1.255
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
Enabling pf
pf enabled
.
add net default: gateway 158.37.73.1
Additional routing options:
IP gateway=YES
.
Starting devd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
/usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
No core dumps found.
Starting named.
Setting date via ntp.
11 Apr 11:28:10
ntpdate[851]: sendto(158.37.73.1): Unknown error: 0
bge0: link state changed to UP
bge1: link state changed to UP
11 Apr 11:28:12
ntpdate[851]: sendto(158.37.73.1): Host is down
11 Apr 11:28:13
ntpdate[851]: sendto(158.37.73.1): Host is down
11 Apr 11:28:14
ntpdate[851]: no server suitable for synchronization found
NFS access cache time=60
Clearing /tmp (X related).
Starting mpd5.
Starting snmpd.
Starting radiusd.
Sun Apr 11 11:28:15 2010 : Info: Starting - reading configuration files
...
Starting dhcpd.
Starting local daemons:
add net 10.160.0.0: gateway 10.192.1.254
add net 10.0.0.0: gateway 10.192.1.254
add net 172.16.0.0: gateway 10.192.1.254
add net 10.192.0.0: gateway 10.192.1.253
.
Updating motd:
.
Starting ntpd.
Starting exim.
Configuring syscons:
keymap
keyrate
font8x16
font8x14
font8x8
blanktime
screensaver
.
Starting sshd.
Starting cron.
--
Med vennlig hilsen / Regards;
Roar Pettersen
Universitetet i Bergen - The University of Bergen
Nygardsgt. 5 - N-5020 BERGEN - Norway
Tlf: +47 55 58 40 55 fax: +47 55 58 40 70
roar.pe...@it.uib.no - IT-Avd, UiB - http://www.uib.no