virtual usb drive mounting error

[Pavel Sukhoy]

Hi All,

I hope it's a right place to ask, if no, please advice right mailing list.

I'm trying to install freebsd remotely by "Intel remote management module
2".

My server is based on intel S5000PAL motherboard and have dedicated remote
management module.

If I try to boot from remotely mounted drive/iso it goes fine until I
choose installation media - in messages I see a read error.

If I try to mount remote drive on working FreeBSD - I see that virtual
device recognized fine, but gets error when trying to mount:

Remotely connecting iso:

12:53:33 kernel: umass3: <Intel(R) Multidevice, class 0/0, rev
2.00/0.01, addr 2> on usbus4
12:53:33 kernel: umass3: SCSI over Bulk-Only; quirks = 0x0000
12:53:34 kernel: umass3:3:3:-1: Attached to scbus3
12:53:35 kernel: (probe0:umass-sim3:3:0:0): TEST UNIT READY. CDB:
0 0 0 0 0 0
12:53:35 kernel: (probe0:umass-sim3:3:0:0): CAM Status: SCSI
Status Error
12:53:35 kernel: (probe0:umass-sim3:3:0:0): SCSI Status: Check
Condition
12:53:35 kernel: (probe0:umass-sim3:3:0:0): UNIT ATTENTION
asc:29,0
12:53:35 kernel: (probe0:umass-sim3:3:0:0): Power on, reset, or
bus device reset occurred
12:53:35 kernel: (probe0:umass-sim3:3:0:0): Retrying Command (per
Sense Data)
12:53:35 kernel: cd3 at umass-sim3 bus 3 target 0 lun 0
12:53:35 kernel: cd3: <Intel(R) RMM2 VDrive 4 0.01> Removable CD-
ROM SCSI-3 device
12:53:35 kernel: cd3: 40.000MB/s transfers
12:53:35 kernel: cd3: cd present [1058112 x 2048 byte records]

And now I trying to mount it:

12:54:20 kernel: g_vfs_done():cd3[READ(offset=32768,
length=2048)]error = 5

Has anyone else seen similar problems?

Thanks in advance for any help.

--
With best regards,
Pavel Sukhoy.