Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Toshiba U405-S2833 does not resume from S3 suspend FreeBSD-8.0-STABLE-201004

7 views
Skip to first unread message

Aravind K. Mikkilineni

unread,
Apr 11, 2010, 12:23:58 PM4/11/10
to freebs...@freebsd.org
I have a Toshiba U405-S2833 laptop which does not resume from S3 suspend
running FreeBSD-8.0-STABLE-201004 with the following patch to get the msk
ethernet device to work (ACPI related).

http://forums.freebsd.org/showpost.php?p=59431&postcount=54

The console output from a suspend/resume session is as follows:

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
>>>>> These are comments <<<<<
# sync
# sync
# sync
# acpiconf -s 3
# fwohci0: fwohci_pci_suspend
>>>>> SYSTEM GOES TO SLEEP AT THIS POINT <<<<<
>>>>> Press key on keyboard to wake up <<<<<
>>>>> or close lid/screen and open lid/screen <<<<<
acpi0: suspend request ignored (not ready yet)
acpi0: request to enter state S5 failed (err 6)
battery0: battery initialization start
ugen3.2: <vendor 0x08ff> at usbus3 (disconnected)
battery0: battery initialization done, tried 1 times
acpi_ec0: wait timed out (response), forcing polled mode
>>>>> Keyboard is unresponsive at this point <<<<<
>>>>> Every few minutes afterward the following two appear <<<<<
acd0: WARNING -TEST_UNIT_READY taskqueue timeout - completing request directly
acd0: WARNING - PREVENT_ALLOW taskqueue timeout - completing request directly
>>>>> The only button that generates a response is the power button <<<<<
>>>>> Press power button <<<<<
request to enter state S5 failed (err 6)
>>>>> Hold down power button to shutdown computer and bring back up <<<<<
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I am able to suspend/resume without the patch, however I have no ethernet.
Console output below running unpatched GENERIC kernel

vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
>>>>> These are comments <<<<<
# sync
# sync
# sync
# acpiconf -s 3
# fwohci0: fwohci_pci_suspend
>>>>> SYSTEM GOES TO SLEEP AT THIS POINT <<<<<
>>>>> Press key on keyboard to wake up <<<<<
>>>>> or close lid/screen and open lid/screen <<<<<
acpi0: suspend request ignored (not ready yet)
acpi0: request to enter state S5 failed (err 6)
battery0: battery initialization start
ugen3.2: <vendor 0x08ff> at usbus3 (disconnected)
battery0: battery initialization done, tried 1 times
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000,SelfID Count=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus managet 0
fwohci0: unrecoverable error
>>>>> Press Enter <<<<<
#
>>>>> Back to normal operation <<<<<
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have gathered all relevent information and placed it at the following
address so as not to create a super long post. (The link below ~90k)

http://cobweb.ecn.purdue.edu/~amikkili/private/Toshiba_U405-S2833.tar.gz

Included are the following
.
|-- INDEX "This file"
|-- S3_console_output "Transcribed console output after resume"
|-- asl.gz "acpidump -dt"
|-- dmesg.GENERIC "dmesg from unpatched GENERIC kernel"
|-- dmesg.PATCHED_GENERIC "dmesg from patched GENERIC kernel"
|-- dmesg.linux "dmesg from linux on same laptop"
|-- pcib_pci.patch "PATCH used to get msk ethernet working"
|-- sysctl.output "sysctl -a"
`-- other_info_from_linux "Other information from linux on same laptop"
|-- dsdt
|-- iomem
|-- ioports
|-- lsmod.log
|-- lspci.log
`-- lsusb.log

I included some information from Linux as well since the machine works under
linux (including ACPI). Hopefully that is helpful is correcting the behavior
in FreeBSD.

Any assistance is appreciated. Please let me know if more information is
needed.

Thanks!

-akm

Aravind K. Mikkilineni

unread,
Apr 11, 2010, 8:53:18 PM4/11/10
to freebs...@freebsd.org
One other thing I should have pulled out of the dmesg and pointed out in the
e-mail I get the following ACPI Error messages at the beginning of boot. This
is true for both the patched and unpatched kernel.

ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error: No handler for Region [ERAM] (0xffffff0002697980)
[EmbeddedControl] (20100121/evregion-487)
ACPI Error: Region EmbeddedControl(3) has no handler (20100121/exfldio-383)
ACPI Error (psparse-0633): Method parse/execution failed
[\\_SB_.PCI0.LPCB.CIR_._STA] (Node 0xffffff00026a2be0), AE_NOT_EXIST
ACPI Error (uteval-0318): Method execution failed [\\_SB_.PCI0.LPCB.CIR_._STA]
(Node 0xffffff00026a2be0), AE_NOT_EXIST
acpi0: reservation of ff80000, 10000 (3) failed

-akm


0 new messages