Can't reach Glued on Beagle Bone Black

[Onur GUZEL]

Hello,

I have some problems accessing Beagle Bone Black after installing Glued on Sd Card. Before this I was able to reach 192.168.7.2 BBB ip and ttyACM0  with minicom. BBB had the default Debian Image on it.

I installed Glued according to https://github.com/LSTS/glued

• cd ~/lsts/glued
  
• ./mkconfig.bash lauv-seacon-1-aux
  
• ./mksystem.bash lctr-b2xx/lauv-seacon-1-aux.bash 
  
• ./pktoolchain.bash lctr-b2xx/lauv-seacon-1-aux.bash
  
• ./pkrootfs.bash lctr-b2xx/lauv-seacon-1-aux.
• sudo ./mkdisk.bash lctr-b2xx/lauv-seacon-1-aux.bash /dev/sdb1

Then when I press Boot button for five seconds, leds begin to flash and after all that D2 flashes continuosly. 

But I cannot find any new usb device or a new network interface on my Ubuntu. 

When I check udevadm monitor log I dont see any logs after removing or adding BBB via USB cable.

I can also see logs on Glued installed Sd Card under /lsts/glued folder, after connecting SdCard to my Notebook PC Ubuntu.

P.s. Dune was succesfully running on Debian installed BeagleBone Black.

/lsts/glued/system.log

Jan  1 00:02:32 lauv-seacon-1-aux syslog.info syslogd started: BusyBox v1.24.1

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: klogd started: BusyBox v1.24.1 (2016-11-13 02:56:23 +03)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Booting Linux on physical CPU 0x0

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Initializing cgroup subsys cpu

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Initializing cgroup subsys cpuacct

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000] Linux version 3.14.63 (onur@OnurSamsungNotebook) (gcc version 4.9.3 (GCC) ) #1 PREEMPT Sun Nov 13 03:00:11 +03 2016

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Machine model: TI AM335x BeagleBone

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Memory policy: Data cache writeback

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000] On node 0 totalpages: 130816

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c0577188, node_mem_map dfafa000

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000]   Normal zone: 1024 pages used for memmap

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000]   Normal zone: 130816 pages, LIFO batch:31

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] CPU: All CPU(s) started in SVC mode.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] AM335X ES2.1 (sgx neon )

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.000000] pcpu-alloc: [0] 0 

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129792

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro quiet

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] allocated 1048576 bytes of page_cgroup

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.000000] Memory: 511716K/523264K available (3694K kernel code, 343K rwdata, 1332K rodata, 194K init, 295K bss, 11548K reserved, 0K highmem)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000] Virtual kernel memory layout:

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]       .text : 0xc0008000 - 0xc04f0d8c   (5028 kB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]       .init : 0xc04f1000 - 0xc0521970   ( 195 kB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]       .data : 0xc0522000 - 0xc0577da0   ( 344 kB)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.000000]        .bss : 0xc0577dac - 0xc05c1b54   ( 296 kB)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Preemptible hierarchical RCU implementation.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] NR_IRQS:16 nr_irqs:16 16

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] Total of 128 interrupts on 1 active controller

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000000] OMAP clockevent source: timer2 at 24000000 Hz

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000010] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000028] OMAP clocksource: timer1 at 24000000 Hz

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000233] Console: colour dummy device 80x30

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.000267] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.019474] pid_max: default: 32768 minimum: 301

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.019598] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.019610] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.026625] Initializing cgroup subsys memory

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.026675] Initializing cgroup subsys devices

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.026688] Initializing cgroup subsys freezer

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.026698] Initializing cgroup subsys blkio

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.026778] CPU: Testing write buffer coherency: ok

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.027117] Setting up static identity map for 0x8037f8d0 - 0x8037f928

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.028465] devtmpfs: initialized

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.030436] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.040167] omap_hwmod: tptc0 using broken dt data from edma

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.040279] omap_hwmod: tptc1 using broken dt data from edma

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.040381] omap_hwmod: tptc2 using broken dt data from edma

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.044763] omap_hwmod: debugss: _wait_target_disable failed

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.098143] pinctrl core: initialized pinctrl subsystem

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.098529] regulator-dummy: no parameters

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.098805] NET: Registered protocol family 16

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.099266] DMA: preallocated 256 KiB pool for atomic coherent allocations

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.099743] cpuidle: using governor ladder

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.099755] cpuidle: using governor menu

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.105190] platform 49000000.edma: alias fck already exists

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.105215] platform 49000000.edma: alias fck already exists

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.105228] platform 49000000.edma: alias fck already exists

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.105646] gpiochip_add: registered GPIOs 0 to 31 on device: gpio

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.105985] OMAP GPIO hardware version 0.1

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.106570] gpiochip_add: registered GPIOs 32 to 63 on device: gpio

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.107263] gpiochip_add: registered GPIOs 64 to 95 on device: gpio

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.108058] gpiochip_add: registered GPIOs 96 to 127 on device: gpio

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.118275] bio: create slab <bio-0> at 0

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.125309] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.125635] of_get_named_gpiod_flags: can't parse gpios property of node '/fixedregulator@0[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.125795] vmmcsd_fixed: 3300 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.127001] SCSI subsystem initialized

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.127324] usbcore: registered new interface driver usbfs

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.127397] usbcore: registered new interface driver hub

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.127643] usbcore: registered new device driver usb

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.127930] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.127955] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.128062] pps_core: LinuxPPS API ver. 1 registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.128071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giom...@linux.it>

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.128097] PTP clock support registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.129104] Switched to clocksource timer1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.139000] NET: Registered protocol family 2

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.139875] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.139937] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140035] TCP: Hash tables configured (established 4096 bind 4096)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140112] TCP: reno registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140127] UDP hash table entries: 256 (order: 1, 12288 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140152] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140390] NET: Registered protocol family 1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140762] RPC: Registered named UNIX socket transport module.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140777] RPC: Registered udp transport module.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140784] RPC: Registered tcp transport module.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.140791] RPC: Registered tcp NFSv4.1 backchannel transport module.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.142461] futex hash table entries: 256 (order: 0, 7168 bytes)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.143996] msgmni has been set to 999

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.145785] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.145805] io scheduler noop registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.145813] io scheduler deadline registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.145852] io scheduler cfq registered (default)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.146471] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.147159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.148410] omap_uart 44e09000.serial: no wakeirq for uart0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.148431] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.148774] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.149266] console [ttyO0] enabled

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.149692] omap_uart 48022000.serial: no wakeirq for uart0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.149711] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48022000[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.149914] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.150301] omap_uart 48024000.serial: no wakeirq for uart0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.150317] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/serial@48024000[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.150480] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90, base_baud = 3000000) is a OMAP UART2

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.154866] loop: module loaded

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.155845] PPP generic driver version 2.4.2

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156071] PPP BSD Compression module registered

Jan  1 00:02:32 lauv-seacon--1aux user.info kernel: [    0.156081] PPP Deflate Compression module registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156110] PPP MPPE Compression module registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156206] usbcore: registered new interface driver cdc_acm

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156215] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156292] usbcore: registered new interface driver usb-storage

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156449] usbcore: registered new interface driver usbserial

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156497] usbcore: registered new interface driver ftdi_sio

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156548] usbserial: USB Serial support registered for FTDI USB Serial Device

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156592] usbcore: registered new interface driver option

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.156639] usbserial: USB Serial support registered for GSM modem (1-port)

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.157956] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/usb@47400000/usb-phy@47401300[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.158017] 47401300.usb-phy supply vcc not found, using dummy regulator

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.159854] musb-hdrc musb-hdrc.0.auto: Failed to request rx1.

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.166113] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.174297] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.174665] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.174700] 47401b00.usb-phy supply vcc not found, using dummy regulator

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.176416] musb-hdrc musb-hdrc.1.auto: Failed to request rx1.

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.182607] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.190755] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.197658] couldn't find an available UDC

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.198376] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.198501] i2c /dev entries driver

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.198729] pps_ldisc: PPS line discipline registered

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.198903] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.199209] pps pps0: new PPS source pps.6.-1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.199322] pps pps0: Registered IRQ 221 as PPS source

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.199381] Driver for 1-wire Dallas network protocol.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.200488] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.200893] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.200906] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.204784] 48060000.mmc supply vmmc_aux not found, using dummy regulator

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.237387] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.237403] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.237688] 481d8000.mmc supply vmmc_aux not found, using dummy regulator

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.268506] mmc0: host does not support reading read-only switch. assuming write-enable.

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269477] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269494] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269506] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269516] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269537] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269729] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269858] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.269980] of_get_named_gpiod_flags exited with status 0

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.270536] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.270838] mmc0: new high speed SDHC card at address 1234

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.271450] mmcblk0: mmc0:1234 SA08G 7.28 GiB 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.272840] omap-sham 53100000.sham: hw accel on OMAP rev 4.3

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.272868] omap-sham 53100000.sham: initialization failed.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.278894]  mmcblk0: p1 p2 p3

Jan  1 00:02:32 lauv-seacon-1-aux user.warn kernel: [    0.280069] omap-sham: probe of 53100000.sham failed with error -22

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.280570] TCP: cubic registered

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.280581] Initializing XFRM netlink socket

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.280617] NET: Registered protocol family 17

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.281816] NET: Registered protocol family 15

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.284330] ThumbEE CPU extension supported.

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.284366] Registering SWP/SWPB emulation handler

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.284969] registered taskstats version 1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.285083] regulator-dummy: disabling

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.288009] DCDC1: at 1500 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.288901] vdd_mpu: 925 <--> 1325 mV at 1325 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.292841] vdd_core: 925 <--> 1150 mV at 1125 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.293678] LDO1: at 1800 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.294475] LDO2: at 3300 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.295789] LDO3: 1800 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.296574] LDO4: at 3300 mV 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.297199] tps65217 0-0024: TPS65217 ID 0xe version 1.2

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.297235] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.300351] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.300366] musb-hdrc: MHDRC RTL version 2.0 

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.300375] musb-hdrc: setup fifo_mode 4

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.300389] musb-hdrc: 28/31 max ep, 16384/16384 memory

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.303652] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.303666] musb-hdrc: MHDRC RTL version 2.0 

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.303674] musb-hdrc: setup fifo_mode 4

Jan  1 00:02:32 lauv-seacon-1-aux user.debug kernel: [    0.303686] musb-hdrc: 28/31 max ep, 16384/16384 memory

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.303736] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.303777] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.303986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.304000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.304010] usb usb1: Product: MUSB HDRC host driver

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.304020] usb usb1: Manufacturer: Linux 3.14.63 musb-hcd

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.304030] usb usb1: SerialNumber: musb-hdrc.1.auto

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.304733] hub 1-0:1.0: USB hub found

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.304779] hub 1-0:1.0: 1 port detected

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.347765] mmc1: BKOPS_EN bit is not set

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.353123] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.353138] davinci_mdio 4a101000.mdio: detected phy mask fffffffb

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.354237] libphy: 4a101000.mdio: probed

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.354260] davinci_mdio 4a101000.mdio: phy[2]: device 4a101000.mdio:02, driver SMSC LAN8710/LAN8720

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.354744] Random MACID = ea:dc:f6:5e:8c:56

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.355828] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.356855] mmc1: new high speed MMC card at address 0001

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.361297] mmcblk1: mmc1:0001 S10004 3.56 GiB 

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.361563] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.361917] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.363185]  mmcblk1: p1 p2

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.366099]  mmcblk1boot1: unknown partition table

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.368614]  mmcblk1boot0: unknown partition table

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.376123] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.376199] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.387501] devtmpfs: mounted

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.387789] Freeing unused kernel memory: 192K (c04f1000 - c0521000)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.725668] net eth0: initializing cpsw version 1.12 (0)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.789890] net eth0: phy found : id is : 0x7c0f1

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.789955] libphy: PHY 4a101000.mdio:03 not found

Jan  1 00:02:32 lauv-seacon-1-aux user.err kernel: [    0.794999] net eth0: phy 4a101000.mdio:03 not found on slave 1

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [    0.844415] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [    0.946976] random: dropbearkey urandom read with 58 bits of entropy available

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [   19.246203] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [   19.257980] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Jan  1 00:02:32 lauv-seacon-1-aux user.notice kernel: [   20.126514] random: nonblocking pool is initialized

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [   21.272424] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Jan  1 00:02:32 lauv-seacon-1-aux user.info kernel: [   22.237713] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2: 

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2: Starting ptpd2 daemon with parameters:      /usr/bin/ptpd2 -g -b eth0 

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   Info:    Going to check lock /var/run/kernel_clock

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   Info:    No ptpd daemons detected in parallel (as expected)

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   Info:    No ntpd daemons detected in parallel (as expected)

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   Info:    Now running as a daemon

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   Info:    Going to check lock /var/run/kernel_clock

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   Info:    Startup finished sucessfully

Jan  1 00:02:32 lauv-seacon-1-aux authpriv.warn dropbear[377]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key

Jan  1 00:02:32 lauv-seacon-1-aux authpriv.info dropbear[377]: Not backgrounding

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2: refreshed IGMP multicast memberships

Jan  1 00:02:32 lauv-seacon-1-aux daemon.info ptpd2:   now in state PTP_LISTENING

Jan  1 00:02:44 lauv-seacon-1-aux daemon.info ptpd2: refreshed IGMP multicast memberships

Jan  1 00:02:44 lauv-seacon-1-aux daemon.info ptpd2:   now in state PTP_LISTENING

Jan  1 00:02:56 lauv-seacon-1-aux daemon.info ptpd2: refreshed IGMP multicast memberships

Jan  1 00:02:56 lauv-seacon-1-aux daemon.info ptpd2:   now in state PTP_LISTENING

Regards

[João Fortuna]

Hi,

GLUED does not have the USB network interface enabled, you should connect to it via ethernet or serial (through the debug port).

Also, depending on the configuration you choose, the IP will be set and fixed.

You can see it here for your case:

https://github.com/LSTS/glued/blob/master/systems/lctr-b2xx/lauv-seacon-1-aux.cfg

cfg_eth_ext_ip='10.0.10.13'

cfg_eth_ext_mk='255.255.0.0'

cfg_eth_ext_gw='10.0.0.1'

Regards,

João

--
You received this message because you are subscribed to the Google Groups "LSTS Toolchain" group.
To unsubscribe from this group and stop receiving emails from it, send an email to lsts-toolchain+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/lsts-toolchain.
To view this discussion on the web visit https://groups.google.com/d/msgid/lsts-toolchain/2e255e6b-7763-4df1-806b-b58d73e483d9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Onur GUZEL]

Hello João,

Thanks for your answer, I sucessfully installed Glued and Dune together on Beagle Bone. I can also reach Beagle Bone via cross cable and make ssh to the board.  Now I am trying to configure /opt/lsts/dune/etc/lauv-seacon-1-aux.ini, because I want to integrate Neptus and Dune together. Neptus gives java.net.ConnectException: Connection refused: 10.0.10.13/10.0.10.13:9999 (TCPTransport.java:363) {TCPTransport: Sender Thread 1715187306} {Neptus.Pub} error. I also send Neptus vehicle properties screenshot.

After changing configuration file I restart dune by "services dune restart".

/opt/lsts/dune/etc/lauv-seacon-1-aux.ini ( I just send the networking related configurations, the above lines of this configuration file are same with the github version )

[Transports.TCP.Client]                                                     

Enabled                                 = Always                            

Entity Label                            = TCP to Master                     

Server - Address                        = 10.0.10.13                        

Server - Port                           = 9999                              

Transports                              = Heartbeat,                        

                                          LoggingControl,                   

                                          PowerChannelControl,              

                                          PowerChannelState,                

                                          EntityActivationState,            

                                          EntityState,                      

                                          EntityInfo                        

                                                                            

[Transports.FTP]                                                            

Enabled                                 = Always                            

Entity Label                            = FTP Server 

[Transports.HTTP]                                                           

Enabled                                 = Always                            

Port                                    = 8080                              

Threads                                 = 5                                 

Entity Label                            = HTTP Server                       

Transports                              = CpuUsage,                         

                                          Current,                          

                                          EntityState,                      

                                          FuelLevel,                        

                                          GpsFix,                           

                                          Heartbeat,                        

                                          LinkLevel,                        

                                          PowerChannelState,                

                                          RSSI,                             

                                          StorageUsage,                     

                                          Temperature,                      

                                          Voltage

                                  

[Transports.UDP/PTU]

Enabled                                    = Always        

Entity Label                               = PTUTransport

Local Port                                 = 6020

Static Destinations                        = 10.0.10.13:6002

Transports                                 = EstimatedState

Regards

1 Aralık 2016 Perşembe 02:13:44 UTC+3 tarihinde João Fortuna yazdı:

To unsubscribe from this group and stop receiving emails from it, send an email to lsts-toolchai...@googlegroups.com.

[José Pinto]

Hi Onur,

If you want to connect to the beaglebone from Neptus you should have either a tcp server (instead of client) or a udp transport (recommended). The configuration you're using is for a secondary cpu which connects to the main one using a tcp client much like Neptus does. Instead look at lauv-seacon-1.ini file.

Regards,
José

...

[Onur GUZEL]

Hello Jose,

Thanks, I checked lauv-seacon-1.ini but I did not find any TCP.Server, I changed my transports according to your suggestion, still I cant connect to beagle Bone Dune from Neptus on my notebook pc.

[Transports.TCP.Server]                                                     

Enabled                                 = Always                                

Entity Label                            = Dune TCP Server                          

Server - Address                        = 10.0.10.13                        

Server - Port                           = 9999                              

Transports                              = Heartbeat,                        

                                          LoggingControl,                   

                                          PowerChannelControl,                  

                                          PowerChannelState,                       

                                          EntityActivationState,            

                                          EntityState,                      

                                          EntityInfo  

[Transports.UDP]                                                 

Enabled                                    = Always           

Entity Label                               = Dune UDP Server

Local Port                                 = 6002               

Server - Address                           = 10.0.10.13  

Server - Port                              = 6002           

Static Destinations                        = 10.0.10.13:6002

Transports                                 = EstimatedState 

Regards

2 Aralık 2016 Cuma 03:36:31 UTC+3 tarihinde José Pinto yazdı:

[Onur GUZEL]

Hello,

My previous email has the wrong configuration. Configuration looks like 

[Transports.TCP.Server]                                                     

Enabled                                 = Always                                

Entity Label                            = Dune TCP Server                          

Local Port                              = 9999                              

Announce Service                        = true                              

Transports                              = Heartbeat,                        

                                          LoggingControl,                   

                                          PowerChannelControl,                  

                                          PowerChannelState,                       

                                          EntityActivationState,     

                                          EntityState,           

                                          EntityInfo 

[Transports.UDP]                                                     

Enabled                                    = Always              

Entity Label                               = Dune UDP Server  

Local Port                                 = 6002           

AnnounceService                            = true               

Transports                                 = EstimatedState,

                                             CpuUsage,      

                                             Temperature,

                                             Voltage  

Regards

2 Aralık 2016 Cuma 04:18:29 UTC+3 tarihinde Onur GUZEL yazdı: