Advice on high hourglass energy during SPH impact on Lagrangian elements.

23 views
Skip to first unread message

Wong Ming Hao

unread,
Oct 21, 2026, 4:17:58 AMOct 21
to LS-DYNA2

Dear all,

We are simulating combined fragmentation and blast loading on a concrete plate, with the explosive modelled using Lagrangian elements and the steel casing represented by SPH particles. The contact between the concrete and the SPH particles is defined using TIED_NODES_TO_SURFACE.

We have observed very high hourglass energy when the SPH particles impact the concrete plate. We would appreciate your advice on the possible causes of this behaviour and how to address it.

Thanks and BR,
Ming Hao

WhatsApp Image 2026-10-21 at 16.09.352.jpeg
Screenshot 2026-10-21 161145.png
WhatsApp Image 2026-10-21 at 16.09.35.jpeg

l...@schwer.net

unread,
Oct 21, 2026, 10:39:03 AMOct 21
to Wong Ming Hao, LS-DYNA2

Point loads, e.g. SPH particles, are the primary cause of hourglassing for solid elements.

 

My suggestion would be to decrease the time step as the particles approach the target.

 

You might also consider not using the TIED contact for the particle to solid interaction.

                                --len

--
You received this message because you are subscribed to the Google Groups "LS-DYNA2" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ls-dyna2+u...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ls-dyna2/ab452a11-9de4-4595-b379-5265cbb861d2n%40googlegroups.com.

Reply all
Reply to author
Forward
0 new messages