Removing rubberising

[Taun Bewsher]

Hi guys.

The rubberising on the back of my 130 is really starting to look bad. What is the easiest way to remove this stuff? I am not planning to redo the rubberising, but rather want to paint the bin with a thick coat of stonechip.

Regards,
Taun

Sent from my iPhone

[JANSEN VAN RENSBURG, HANNES (AG/6216)]

Hi Guys
A very prosperous 2013 for everyone.

On the 31st of December I had to go and recover a fool that got stuck in a vlei. At one spot the water was very deep. The Little Black Box on my V8 Disco know gives a alarm on the "Wat/Alt" light. Where do I start looking for the problem? The alt light of the Disco does not go on when the motor is running but the "Wat/Alt" light on the Little Black Box stays on.

Thanks for any feedback

Hannes
This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled
to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and
all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited.

All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto, including its
subsidiaries. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware".
Monsanto, along with its subsidiaries, accepts no liability for any damage caused by any such code transmitted by or accompanying
this e-mail or any attachment.


The information contained in this email may be subject to the export control laws and regulations of the United States, potentially
including but not limited to the Export Administration Regulations (EAR) and sanctions regulations issued by the U.S. Department of
Treasury, Office of Foreign Asset Controls (OFAC). As a recipient of this information you are obligated to comply with all
applicable U.S. export laws and regulations.

[Peter Levey]

From the manual:

Wat/Alt (Yellow) - Indicates low coolant level – LED on Alternator
(fan belt) – LED blink


Peter Levey
http://www.flickr.com/photos/leveypa/

> --
> Follow us on Twitter twitter.com/LROCSouthAfrica
>
> You received this message because you are subscribed to the "LROC Techtorque Discussion Forum" group.
> To post to this group, send email to lroc-te...@googlegroups.com
> To unsubscribe from this group, send email to lroc-techtorq...@googlegroups.com
> Or visit http://groups.google.com/group/lroc-techtorque

[JANSEN VAN RENSBURG, HANNES (AG/6216)]

Thanks Peter. I checked the coolant level on Monday after the alarm came on and everything seemed fine. I checked it again now and it needed coolant.
Where can I get a copy of the manual?

Regards

-----Original Message-----
From: lroc-te...@googlegroups.com [mailto:lroc-te...@googlegroups.com] On Behalf Of Peter Levey
Sent: Wednesday, January 02, 2013 2:09 PM
To: lroc-te...@googlegroups.com
Subject: Re: [LROC Techtorque] Little Black Box question

From the manual:

Wat/Alt (Yellow) - Indicates low coolant level - LED on Alternator
(fan belt) - LED blink

[Peter Levey]

Hannes there is one on the website http://www.littleblackbox.co.za/

Specifically at http://www.littleblackbox.co.za/html/owner_s_manual.html

Peter Levey
http://www.flickr.com/photos/leveypa/


On Wed, Jan 2, 2013 at 2:35 PM, JANSEN VAN RENSBURG, HANNES (AG/6216)

[JANSEN VAN RENSBURG, HANNES (AG/6216)]

Thanks Peter
Hannes J Rensburg

[Joe Gordon]

http://www.littleblackbox.co.za/html/owner_s_manual.html

On Wed, Jan 2, 2013 at 1:51 PM, JANSEN VAN RENSBURG, HANNES (AG/6216) <hannes.jansen...@monsanto.com> wrote:

[Taun Bewsher]

Sent from my iPad

Begin forwarded message: