Multiple LoadGenerators for single script in Controller

[jaganred...@gmail.com]

Hi All,

Any one have idea about how to add Multiple LoadGenerators for single
script in Controller

Thanks,

Jagadishwar

[Shane (HP)]

Simply add the script to the scenario multiple times, and select a
different Load Generator each time. Divide your load among them how
ever you like.

Cheers,

Shane Evans

On Aug 4, 7:43 pm, "jaganreddykom...@gmail.com"

[Ashwin]

Are u using Performance center ? If yes select n number LG's in LG's selection
Ashwin Maddi

Hi All,

Thanks,

Jagadishwar

--
You received this message because you are subscribed to the Google "LoadRunner" group.
To post to this group, send email to LR-Loa...@googlegroups.com
To unsubscribe from this group, send email to
LR-LoadRunne...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/LR-LoadRunner?hl=en

[Sagar Aggarwal]

Simple, Add same script two times in controller and allocate two LG's for each script.

[syed zuber]

Jagan,


there is an option of adding multiple load generators in contoller.....do that..

or browse the same script multiple times  andadd diferentlgs.

Syed Zuber

[kantharaja t]

if you are using the Controller go to run tab and add vuser in groups and select the controller from drop down and add vusers

 

Thanks,

Kantha

Thanks and Regards

 Kantharaja

[Vidya Elluru]

Hi,

Use the below steps to add generators to the scenario morethan one ....

Step1: Select Scenario option >> click run/stop users
Step2: 
 Click on drop down list under Load Generators column and click on “All Generators “button to assign load generators to specific group name in the Group Name column

Step3: Click ok button to view the following screen to reflect the load generators to the particular group name 
Step4: Click Run button

Thanks,

Vidya elluru

Sent from my iPhone

[raja sekhar]

After adding the script to scenario, go to load generator drop down
list section,meanwhile in seperate notepad note down your LG system
ips as here 10.x.x.x;10.x.x.x and copy these and paste in that LG
section of the script directly . Now you can see your LG ips seperated
by semi colon

--
Sent from my mobile device