Help with live view / problem solving..

[Chris Bartlett]

Hi All,

I have a curious problem I’m trying to solve. I made a change a little while back to add a triple-click to my (1-wire) backdoor switch to turn off all the lights in the house. Not sure what else I did, but I have noticed now that normal cycling through the modes with a single click will have it turn off the lights, and then immediately turn them back on. More worryingly, we are often seeing the lights flicker in one room and I think (although it’s hard to verify) that the relay is firing (and a dimmer Chanel or two) to do this.

So.. I’m trying to debug in config, but it’s a while since I’ve been in there. I’ve turned on Liveview and I’m pretty sure I used to be able to activate buttons and see the results live in the config, however I don’t seem able to click my switches? Docs say to click the green pin and make manual adjustments, but mine just looks like this and doesn’t do anything:

[Simon Still]

What version of config are you using?  I've just looked at mine and the appearance is different- rounded corners etc.  (this is 16.6.10)

Liveview not usable for me either - i don't this being a problem before but it looks like there is now a setting for each switch to determine how it appears in live view (push NO/switch etc).  If I change these from the default to push button it works and I can click to simulate a physical press (otherwise it behaves as a switch).  But I need to spend some time working through them all.