2N Helios IP Gate Phone

[Nick D]

Hi

I am trying to get a 2N Helios IP device gate phone to send a command to my Loxone Miniserver when a DTMF code is sent over the phone 

So far the SIP client is working fine and the 2N helios accepts the DTMF code OK

The manual says that it sends as follows

• Command sent upon activation – set the command to be sent to the external device (WEB relay, e.g.) upon switch activation. The command is sent via the HTTP (GET request) and must be as follows: http://ip_address/path. E.g.: http://192.168.1.50/relay1=on.

I am trying to set up a virtual input (UDP or HTTP ?) to listen for this output but not having any success

I have set the IP address to be the same as my Loxone Miniserver and my path syntax is relay1=open

Any thoughts?

Thanks

Nick