Motion / Presence Setup

[Chris Pitman]

I have a few rooms like bathroom and kitchen with motion sensors so they do different moods depending on time of day. I have a presence sensor new loxone ones just fitted in lounge I want to use it just to detect presence no automatic light I want to switch the lights on then it to just monitor for presence and if I've left the room for say 20min switch lights off. Can't seem to get lighting controller to stop turning lights on.

[Jonathan Dixon]

Several ways you can do this.

Invert  the "DisP" input on the Lighting Controller so it is always "true" and thus disabled; set Brt to 0 lux; or edit the "Automatic" tab so it only has one entry, that corresponds to a operating mode that's never used.

On Thu, 31 Jul 2025 at 13:44, 'Chris Pitman' via Loxone English <loxone-...@googlegroups.com> wrote:

I have a few rooms like bathroom and kitchen with motion sensors so they do different moods depending on time of day. I have a presence sensor new loxone ones just fitted in lounge I want to use it just to detect presence no automatic light I want to switch the lights on then it to just monitor for presence and if I've left the room for say 20min switch lights off. Can't seem to get lighting controller to stop turning lights on.

--
You received this message because you are subscribed to the Google Groups "Loxone English" group.
To unsubscribe from this group and stop receiving emails from it, send an email to loxone-englis...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/loxone-english/ce2408b3-bbad-4fa0-92a0-b52b17815714n%40googlegroups.com.

[Chris Pitman]

Thanks for quick response a great help