Shelly working with Loxone part 2

[Techdoctor]

Since I am unable to post in the original thread, I am setting up a new thread.

To get a Shelly plug s to communicate with Loxone I did this:

In the I/O actions of the plug enable the Output On URL

Then Write 

http://user:password@LoxoneMiniserverIP:Port/dev/sps/io/Shelly_Plug/on

Shelly_Plug is the name of the virtual input. I have set this input type to switch. So now when I use Alexa Loxone will also update.

Then for the Output Off URL just change the on to off

I will be updating the tutorial I did, but this won't happen until the new year.

[Techdoctor]

I have also been working on a ventilation/exhaust fan control using Shelly. This is basically a Shelly 2.5 using output 1 to switch on the bathroom lights via sw1. Output 2 is connected to an extractor fan. Loxone deals with all the timing etc. So when the bathroom lights are on for more than three minutes the fan will come on and then when the lights are switched off the fan will switch off five minutes later. The reason for using a Shelly device is that I have a client who needs 7 extractor fans and using the Loxone nano air gets expensive.  I will also be adding this to my Shelly/Loxone tutorial.