DMX Dimmer Channel as On/Off Switch

[Aaron]

If think this has been answered before but I've struggled to find the answer.

I'm using DMX dimmers for my lighting circuits which work well for dimmable bulbs, however, I would also on the odd occasion like to use a dimmer circuit to control non-dimmable LEDS. Using the default 'smart actuator' settings, a fade up / down is applied but I need an 'all or nothing' instantly.

I've tried changing to standard actuator and the circuit type to 'Switch' but neither have worked. Any ideas what I need to do please?

Just to note, I have been using Lighting Controller V2.

Thanks in advance! 

[Duncan]

change the output type to normal  from smart

in the dmx device, set the fade rate to jump

set the input value 2 to 1 and the target value 2 to 100 - then any input (even a 1 for logical 1 or on) will drive the dmx output to 100% on just like a switch

[Aaron]

I was rather hoping you were online today Duncan!

Works like a charm so as always, many thanks!