DMX Relay

[Nick Barton-Wells]

Hi all
I have the WhiteWing DMX 16-Relay controller. 
Having a play, i am only able to trigger a relay on or off by using a Light Controller.  Is there a better function block to use?

Thanks

Nick

[Jonathan Dixon]

In the output DMX Settings you probably have Actuator type set to the default "Smart" (SMA) output mode, which indeed is a magic protocol within Config that can only be created by the outputs of Lighting Controller block.

Change them to "standard" mode. And while there set Fade Rate to "Jump", and map input value of 1 to output 100 in correction.

You should then be able to drive it from any digital (or analog) signal.

 

--
You received this message because you are subscribed to the Google Groups "Loxone English" group.
To unsubscribe from this group and stop receiving emails from it, send an email to loxone-englis...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/loxone-english/f5b4e465-09f6-4c49-b818-c1fc52b64c2cn%40googlegroups.com.

[Nick Barton-Wells]

Amazing, thank you very much