Shelly Plus Plug S (gen2) integration Loxone

[Kris Van den Brempt (Privé)]

Hi all,

I've bought some Shelly Plus Plug S that I want to integrated in my Loxone system (Energy Monitor).

But can't figure it out, I found documentation for Shelly gen1 devices using http://192.168.x.x/status but this no longer works with Shelly gen2.

But using http://192.168.x.x/rpc/shelly.GetStatus does not seem to work with loxone.

Can someone help me out please with a nice tutorial or advice?

I would prefer to integrate without MQTT.

Thanks a lot!

[Duncan]

have you tried the loxwiki article?

https://loxwiki.atlassian.net/wiki/spaces/LOX/pages/1851523073/Shelly+Plus+Scripte

[Kris Van den Brempt (Privé)]

I think my Loxone does not see my Shelly because they are in different IP ranges.

Loxone is  http://192.168.0.x  (wired)
Shelly has http://192.168.68.x  (wireless)

Is it possible that they can't communicate?

[Duncan]

yes - they need to be in the same subnet so you can either change the ip address of the shelly or use a netmask for both devices of 255.255.128.0 instead of 255.255.255.0 to enable the 2 ip ranges to see each other