Group order?
1 view
Skip to first unread message
Shift
Sep 9, 2009, 6:54:11 PM9/9/09
to Longboard-Atlanta
I might be able to shuffle some things around financially and I could
be ordering my Killswitch this weekend. I'll be ordering 2 packs of
Vicious, some hardware, the Killswitch and I would like a freeride
wheel that's grippier than my Flashbacks and Omar's Obombers (I was
thinking 78a Gumballs? Other [cheap] suggestions?), but I doubt I
could pay for them this week.
Chadd mentioned Sunday how he could hook us up with some killer deals
from Stoked, plus it would give me another excuse to get out to
Gwinnett again.
be ordering my Killswitch this weekend. I'll be ordering 2 packs of
Vicious, some hardware, the Killswitch and I would like a freeride
wheel that's grippier than my Flashbacks and Omar's Obombers (I was
thinking 78a Gumballs? Other [cheap] suggestions?), but I doubt I
could pay for them this week.
Chadd mentioned Sunday how he could hook us up with some killer deals
from Stoked, plus it would give me another excuse to get out to
Gwinnett again.
John (illiterate)
Sep 9, 2009, 7:38:49 PM9/9/09
to Longboard-Atlanta
i wish i needed stuff.
G. Kosiba
Sep 9, 2009, 8:35:05 PM9/9/09
to Longboard-Atlanta
I could use some bearing spacers. Forgot to get those last time.
Graham
Graham
AlG
Sep 9, 2009, 9:10:28 PM9/9/09
to Longboard-Atlanta
In-heats
Hello Kitty - depending on price
Hello Kitty - depending on price
John (illiterate)
Sep 9, 2009, 9:17:01 PM9/9/09
to Longboard-Atlanta
in heats, you say?
next week, week #29.
http://www.daddiesboardshop.com/weekly-wheel-special.aspx
and freeeeeeeeee bearings + oil.
sweet timing.
next week, week #29.
http://www.daddiesboardshop.com/weekly-wheel-special.aspx
and freeeeeeeeee bearings + oil.
sweet timing.
AlG
Sep 9, 2009, 9:23:02 PM9/9/09
to Longboard-Atlanta
wtf? that's jsut dumb.
> next week, week #29.http://www.daddiesboardshop.com/weekly-wheel-special.aspx
> next week, week #29.http://www.daddiesboardshop.com/weekly-wheel-special.aspx
John (illiterate)
Sep 9, 2009, 10:19:21 PM9/9/09
to Longboard-Atlanta
fine. fuck you then. see if i come to your birthday party.
Ian Kalway
Sep 9, 2009, 10:24:43 PM9/9/09
to longboar...@googlegroups.com
al's in heat??? i need builtins
Chadd Hall
Sep 9, 2009, 10:28:04 PM9/9/09
to longboar...@googlegroups.com
Stoked is about to do a blowout on 80a InHeats. 20% off.
C
C
AlG
Sep 10, 2009, 7:43:34 AM9/10/09
to Longboard-Atlanta
$60 for In Heats is just dumb and you don't get nay pie, cake or ice
cream...
On Sep 9, 10:28 pm, Chadd Hall <chaddh...@gmail.com> wrote:
> Stoked is about to do a blowout on 80a InHeats. 20% off.
>
> C
>
cream...
On Sep 9, 10:28 pm, Chadd Hall <chaddh...@gmail.com> wrote:
> Stoked is about to do a blowout on 80a InHeats. 20% off.
>
> C
>
> On Wed, Sep 9, 2009 at 10:24 PM, Ian Kalway <ian.kal...@gmail.com> wrote:
>
> > al's in heat??? i need builtins
>
> > On Wed, Sep 9, 2009 at 10:19 PM, John (illiterate) <mental...@aol.com>
>
> > al's in heat??? i need builtins
>
John (illiterate)
Sep 10, 2009, 10:26:07 AM9/10/09
to Longboard-Atlanta
free shipping, free bearings, free oil. and those wheels are going to
be stupid expensive everywhere. they're from loaded. at least if you
get them from DBS you won't have to snipe bearings from other wheels.
a set from stoked is 54$.
> > > >> > > > > > Gwinnett again.- Hide quoted text -
>
> - Show quoted text -
be stupid expensive everywhere. they're from loaded. at least if you
get them from DBS you won't have to snipe bearings from other wheels.
a set from stoked is 54$.
>
> - Show quoted text -
AlG
Sep 10, 2009, 11:21:58 AM9/10/09
to Longboard-Atlanta
I'm a Biltin guy and I've got Powell Speed Cream.
20% off will make them $43.
and it's a want not a need.
> > - Show quoted text -- Hide quoted text -
20% off will make them $43.
and it's a want not a need.
John (illiterate)
Sep 10, 2009, 11:49:30 AM9/10/09
to Longboard-Atlanta
there's no such thing as "want" when it comes to longboard stuff.
everything is need. immediately.
everything is need. immediately.
Ian Kalway
Sep 10, 2009, 3:38:16 PM9/10/09
to longboar...@googlegroups.com
^^TRUTH^^
Shift
Sep 10, 2009, 7:29:00 PM9/10/09
to Longboard-Atlanta
Right now it looks like the order is sitting at:
1x Rayne Killswitch
2x Vicious griptape
1x 1" trusshead hardware
1x 1.25" trusshead hardware
1x set of 10mm bearings (possibly)
2x sets of bearing spacers
1x set of orange In-Heats
1x Rayne Killswitch
2x Vicious griptape
1x 1" trusshead hardware
1x 1.25" trusshead hardware
1x set of 10mm bearings (possibly)
2x sets of bearing spacers
1x set of orange In-Heats
Shift
Sep 10, 2009, 7:53:17 PM9/10/09
to Longboard-Atlanta
Oh and 2x 2.75" kingpins and one set of those spacers needs to be for
10mm axles.
10mm axles.
AlG
Sep 10, 2009, 10:01:53 PM9/10/09
to Longboard-Atlanta
add 4 more 2.75 kingpins.
Shift
Sep 10, 2009, 10:14:22 PM9/10/09
to Longboard-Atlanta
1x Rayne Killswitch
2x Vicious griptape
1x 1" trusshead hardware
1x 1.25" trusshead hardware
1x set of bearing spacers for 8mm axles
2x Vicious griptape
1x 1" trusshead hardware
1x 1.25" trusshead hardware
1x set of orange In-Heats
6x 2.75" kingpins
(I knocked the bearings and spacers off because I need to pay for some
axle extensions I'm getting from Surf Rodz [I mean, who doesn't like
250mm Randals?])
Colonel Forbin
Sep 10, 2009, 10:28:33 PM9/10/09
to Longboard-Atlanta
for me add: 1 vicious grip tape pack, two sets of speed rings, and two
sets of bearing spacers
I want to order some bushings to start experimenting with my randal
180's but I don;t even know where to start..
advice?
sets of bearing spacers
I want to order some bushings to start experimenting with my randal
180's but I don;t even know where to start..
advice?
AlG
Sep 10, 2009, 10:32:03 PM9/10/09
to Longboard-Atlanta
what board and what do you want them to do?
Extremely useful info here to start with:
http://www.silverfishlongboarding.com/forum/longboard-skateboarding-trucks/106618-bushings-different-types-how-set-them-up.html
I personally like the feel of Venom Barrels.
For DH I like Elims and Barrels.
Playing with you bushing set-up is fun and can really make your board
your own.
On Sep 10, 10:28 pm, Colonel Forbin <ale...@students.kennesaw.edu>
wrote:
Extremely useful info here to start with:
http://www.silverfishlongboarding.com/forum/longboard-skateboarding-trucks/106618-bushings-different-types-how-set-them-up.html
I personally like the feel of Venom Barrels.
For DH I like Elims and Barrels.
Playing with you bushing set-up is fun and can really make your board
your own.
On Sep 10, 10:28 pm, Colonel Forbin <ale...@students.kennesaw.edu>
wrote:
Chadd Hall
Sep 10, 2009, 10:44:15 PM9/10/09
to longboar...@googlegroups.com
Guys, as you add to the list, please put names beside the items or separate it into sections by person.
That will make this easier for me.
Thx,
Chadd
Colonel Forbin
Sep 10, 2009, 11:22:33 PM9/10/09
to Longboard-Atlanta
its for my dervish. it wont be for extreme downhill. and i want to
have a range of durometers to experiment with. i guess what im really
asking is what companies different people like so i can order several
different hardnesses of the same bushing. i was thinkin i was gonna go
with a couple sets of barrel shaped to start. will i need to order
washers for bearing set up?
On Sep 10, 10:32 pm, AlG <algarcia_...@hotmail.com> wrote:
> what board and what do you want them to do?
>
> Extremely useful info here to start with:http://www.silverfishlongboarding.com/forum/longboard-skateboarding-t...
> > > - Show quoted text -- Hide quoted text -
have a range of durometers to experiment with. i guess what im really
asking is what companies different people like so i can order several
different hardnesses of the same bushing. i was thinkin i was gonna go
with a couple sets of barrel shaped to start. will i need to order
washers for bearing set up?
On Sep 10, 10:32 pm, AlG <algarcia_...@hotmail.com> wrote:
> what board and what do you want them to do?
>
Ian Kalway
Sep 10, 2009, 11:52:41 PM9/10/09
to longboar...@googlegroups.com
i need builtin bearings for randals..... - IAN
AlG
Sep 11, 2009, 5:58:00 AM9/11/09
to Longboard-Atlanta
Alex-
I get flat washers for all my bushings or if I get a good fitting
cupped washer I'll use it. You can get washers for pennies at Home
Depot compared to what on-line skate shops will charge. Woody's has
always hooked me when I go in there for bushings.
I like Venoms as they feel really smooth. Reflex feel good but have
tons of rebound, IMO. Paris felt like hard pieces of plastic. Keep the
stock cone bushings to play around with Barrel/Cone combos. I threw
85a Venom barrel/cone combo on my bro's R-180's and it felt awesome
for carving and still felt pretty stable.
I get flat washers for all my bushings or if I get a good fitting
cupped washer I'll use it. You can get washers for pennies at Home
Depot compared to what on-line skate shops will charge. Woody's has
always hooked me when I go in there for bushings.
I like Venoms as they feel really smooth. Reflex feel good but have
tons of rebound, IMO. Paris felt like hard pieces of plastic. Keep the
stock cone bushings to play around with Barrel/Cone combos. I threw
85a Venom barrel/cone combo on my bro's R-180's and it felt awesome
for carving and still felt pretty stable.
Shift
Sep 11, 2009, 7:23:12 AM9/11/09
to Longboard-Atlanta
Personally, I love Sabre bushings, but unfortuneatly Stoked doesn't
carry them. I have Sabre barrels in all of my trucks. Venom is my
second choice, though and for carving low duro double barrels are my
favorite. They have plenty of rebound while still having a ton of
lean.
As for the order:
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x pack of Vicious
2x sets of speed rings
Ian-
1x set of Biltins
carry them. I have Sabre barrels in all of my trucks. Venom is my
second choice, though and for carving low duro double barrels are my
favorite. They have plenty of rebound while still having a ton of
lean.
As for the order:
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
aldrian80
Sep 11, 2009, 9:42:43 AM9/11/09
to Longboard-Atlanta
Venom 90a barrel with 85a cone is great and stable for my weight,180-
ish.
I tried 85a double cones and it's nice but not as stable as
barrels.
Billy,
Can you add these to your list?
2x 1.25" trusshead hardware
And
ish.
I tried 85a double cones and it's nice but not as stable as
barrels.
Billy,
Can you add these to your list?
2x 1.25" trusshead hardware
And
Shift
Sep 11, 2009, 3:45:21 PM9/11/09
to Longboard-Atlanta
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
Aldrian-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
2x 1.25" trusshead hardware
Ian Kalway
Sep 11, 2009, 4:36:02 PM9/11/09
to longboar...@googlegroups.com
I need to know what a good stable bushing combo might be for the FSM..
i love the way it feels right now with a softer venom bottom barrel
with a 93a top khiro... but over 25-30 it scares me a bit.. .
i love the way it feels right now with a softer venom bottom barrel
with a 93a top khiro... but over 25-30 it scares me a bit.. .
Chadd Hall
Sep 11, 2009, 6:09:28 PM9/11/09
to longboar...@googlegroups.com
If you want stability out of those Randals for more DH'y kind of riding. White JimZ bushings with special bottom washers. (I will make those for you.) They are worth the money. Every cent...
C
C
Shift
Sep 11, 2009, 6:14:43 PM9/11/09
to Longboard-Atlanta
I'm loving my white Jimz tops/purple Sabre combo in my Prandals. The
Jimz top is huge and completely fills the Paris bushing seat, but it's
soft so it still turns.
Elims are also a good choice for DH'y bushings. They're not quite as
big as Jimz, but they come in other duros and fit regular cup
washers. I have at least one pair of every duro of Elim.
On Sep 11, 6:09 pm, Chadd Hall <chaddh...@gmail.com> wrote:
> If you want stability out of those Randals for more DH'y kind of riding.
> White JimZ bushings with special bottom washers. (I will make those for
> you.) They are worth the money. Every cent...
>
> C
>
>
>
> On Fri, Sep 11, 2009 at 4:36 PM, Ian Kalway <ian.kal...@gmail.com> wrote:
>
> > I need to know what a good stable bushing combo might be for the FSM..
> > i love the way it feels right now with a softer venom bottom barrel
> > with a 93a top khiro... but over 25-30 it scares me a bit.. .
>
Jimz top is huge and completely fills the Paris bushing seat, but it's
soft so it still turns.
Elims are also a good choice for DH'y bushings. They're not quite as
big as Jimz, but they come in other duros and fit regular cup
washers. I have at least one pair of every duro of Elim.
On Sep 11, 6:09 pm, Chadd Hall <chaddh...@gmail.com> wrote:
> If you want stability out of those Randals for more DH'y kind of riding.
> White JimZ bushings with special bottom washers. (I will make those for
> you.) They are worth the money. Every cent...
>
> C
>
>
>
> On Fri, Sep 11, 2009 at 4:36 PM, Ian Kalway <ian.kal...@gmail.com> wrote:
>
> > I need to know what a good stable bushing combo might be for the FSM..
> > i love the way it feels right now with a softer venom bottom barrel
> > with a 93a top khiro... but over 25-30 it scares me a bit.. .
>
Shift
Sep 11, 2009, 6:33:50 PM9/11/09
to Longboard-Atlanta
Any word on pricing, yet, Chadd? I kinda want to hold off ordering
'til Wednesday or so (when Woody's should have their Killswitch in so
I can stand on one), but if everyone else is ready to pony up by the
end of the weekend I may just go ahead and do it.
'til Wednesday or so (when Woody's should have their Killswitch in so
I can stand on one), but if everyone else is ready to pony up by the
end of the weekend I may just go ahead and do it.
chad...@gmail.com
Sep 11, 2009, 6:54:36 PM9/11/09
to LBA
I will fixup the pricing in a private email to only the parties involved, AFTER the order is deemed complete by all involved.
Cool?
C
-----Original Message-----
From: Shift <warb...@gmail.com>
Date: Fri, 11 Sep 2009 15:33:50
To: Longboard-Atlanta<longboar...@googlegroups.com>
Subject: [Longboard-Atlanta] Re: Group order?
Cool?
C
-----Original Message-----
From: Shift <warb...@gmail.com>
Date: Fri, 11 Sep 2009 15:33:50
To: Longboard-Atlanta<longboar...@googlegroups.com>
Subject: [Longboard-Atlanta] Re: Group order?
Ian Kalway
Sep 11, 2009, 7:19:31 PM9/11/09
to longboar...@googlegroups.com
CHad- would that combo still allow for a lot of freeriding??
this FSM is the sickest ride i have ever had... just a shred fest
this FSM is the sickest ride i have ever had... just a shred fest
chad...@gmail.com
Sep 11, 2009, 7:43:53 PM9/11/09
to LBA
Yes, it just takes away the slop and leaves the lean. Its a great combo. You have to trim the top bushing just a hair to make it fit perfectly.
C
-----Original Message-----
From: Ian Kalway <ian.k...@gmail.com>
Date: Fri, 11 Sep 2009 19:19:31
To: <longboar...@googlegroups.com>
C
-----Original Message-----
From: Ian Kalway <ian.k...@gmail.com>
Date: Fri, 11 Sep 2009 19:19:31
To: <longboar...@googlegroups.com>
KcL
Sep 13, 2009, 12:08:58 PM9/13/09
to Longboard-Atlanta
chad...@gmail.com
Sep 13, 2009, 12:38:18 PM9/13/09
to LBA
Nope, still churning.
C
-----Original Message-----
From: KcL <kevin...@gmail.com>
Date: Sun, 13 Sep 2009 09:08:58
C
-----Original Message-----
From: KcL <kevin...@gmail.com>
Date: Sun, 13 Sep 2009 09:08:58
KcL
Sep 13, 2009, 12:48:35 PM9/13/09
to Longboard-Atlanta
well i would like to get
x1 Precision bones swiss bearings
x2 venom DH pack bushings 93a
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
if thats cool...
x1 Precision bones swiss bearings
x2 venom DH pack bushings 93a
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
if thats cool...
Ross S
Sep 13, 2009, 1:14:58 PM9/13/09
to Longboard-Atlanta
what are prandals? and what is the special washer needed for the jimz
bushings?
bushings?
chad...@gmail.com
Sep 13, 2009, 1:43:53 PM9/13/09
to LBA
Paris hangers/randal plates.
Special washer is one of my tuning tricks for max rebound.
C
-----Original Message-----
From: Ross S <elix...@hotmail.com>
Date: Sun, 13 Sep 2009 10:14:58
Special washer is one of my tuning tricks for max rebound.
C
-----Original Message-----
From: Ross S <elix...@hotmail.com>
Date: Sun, 13 Sep 2009 10:14:58
Shift
Sep 13, 2009, 2:22:21 PM9/13/09
to Longboard-Atlanta
If anyone in the Marietta area wants to try some bushings I have a
very large collection of Reflex, Venom, Sabre, and Jimz bushings
including at least one pair of every duro of Elim and most duros of
barrels down to lemon Reflex. I have a few cones, too.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
bushings
Aldrian-
2x 1.25" trusshead hardware
KCL-
very large collection of Reflex, Venom, Sabre, and Jimz bushings
including at least one pair of every duro of Elim and most duros of
barrels down to lemon Reflex. I have a few cones, too.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
Aldrian-
2x 1.25" trusshead hardware
x1 Precision bones swiss bearings
x2 venom DH pack bushings 93a
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
x2 venom DH pack bushings 93a
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
Chadd Hall
Sep 13, 2009, 3:52:46 PM9/13/09
to longboar...@googlegroups.com
Ian and Alex - What bushings?
C
C
KcL
Sep 13, 2009, 4:04:35 PM9/13/09
to Longboard-Atlanta
hey shift you got a number i can reach you at? i live in marietta and
would like to try some of the venom elim bushings you got....
would like to try some of the venom elim bushings you got....
Shift
Sep 13, 2009, 4:17:05 PM9/13/09
to Longboard-Atlanta
Sure, hit me up at 404-889-7601. If you want to today I'll be around
til 7 or so or any time after 3 during the week. I also bring all my
bushings when I go skate so if you come to one of the sessions I'll
have 'em.
til 7 or so or any time after 3 during the week. I also bring all my
bushings when I go skate so if you come to one of the sessions I'll
have 'em.
Ian Kalway
Sep 13, 2009, 4:31:12 PM9/13/09
to longboar...@googlegroups.com
Chad- i need you to set me up with the Jimz's you recommend for the
FSM.... you said you knew what i would need..
FSM.... you said you knew what i would need..
chad...@gmail.com
Sep 13, 2009, 4:43:37 PM9/13/09
to LBA
aldrian80
Sep 13, 2009, 7:50:33 PM9/13/09
to Longboard-Atlanta
uh...can I add a pair of Indy 169mm truck?
Thanks.
Thanks.
Shift
Sep 13, 2009, 8:57:47 PM9/13/09
to Longboard-Atlanta
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
1x pack of white Jimz bushings
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
Aldrian-
2x 1.25" trusshead hardware
KCL-
x1 Precision bones swiss bearings
x2 venom DH pack bushings 93a
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
All we're waiting on now is Alex to decide which bushings he'd like, I
think.
Ross S
Sep 13, 2009, 9:07:10 PM9/13/09
to Longboard-Atlanta
put me down for some JimZ white bushings, please.
Shift
Sep 13, 2009, 10:04:46 PM9/13/09
to Longboard-Atlanta
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
1x pack of white Jimz bushings
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
bushings
Ian-
1x set of Biltins
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL-
x1 Precision bones swiss bearings
x1 Precision bones swiss bearings
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
x4 (4 foot) insanley grippy griptape
bushings for Grizzly 852s (Chadd [and anyone else running grizzlies]
we'd like some input on bushings for a 150lb rider. I was thinking
white Jimz or 85-90a Elims)
Ross-
1x pack of white Jimz
KcL
Sep 13, 2009, 11:24:57 PM9/13/09
to Longboard-Atlanta
thanks shift
Chadd Hall
Sep 14, 2009, 10:54:03 AM9/14/09
to longboar...@googlegroups.com
Alex needs to step up and identify his bushings. I am about to start working on the pricing.
C
C
Colonel Forbin
Sep 14, 2009, 11:02:21 AM9/14/09
to Longboard-Atlanta
hahah chadd, gimme 10 mins
Shift
Sep 14, 2009, 11:07:52 AM9/14/09
to Longboard-Atlanta
Chadd, KCL still needs help picking bushings for his Grizzlies. He'll
be riding with me this afternoon to try to figure it out, but any
input you have would be great. He weighs 150lbs.
be riding with me this afternoon to try to figure it out, but any
input you have would be great. He weighs 150lbs.
Ha Nguyen
Sep 14, 2009, 11:09:47 AM9/14/09
to longboar...@googlegroups.com
Put me down for a set of jimz
Ha: 1 set of white JimZ bushings
On Sep 14, 2009 11:07 AM, "Shift" <warb...@gmail.com> wrote:
Chadd, KCL still needs help picking bushings for his Grizzlies. He'll
be riding with me this afternoon to try to figure it out, but any
input you have would be great. He weighs 150lbs.
On Sep 14, 10:54 am, Chadd Hall <chaddh...@gmail.com> wrote:
> Alex needs to step up and identify his bushings. I am about to start working > on the pricing. > >...
> On Sun, Sep 13, 2009 at 11:24 PM, KcL <kevincao...@gmail.com> wrote: > > > thanks shift > > > On S...
Chadd Hall
Sep 14, 2009, 11:11:01 AM9/14/09
to longboar...@googlegroups.com
150lbs on flat mounted 852's?
Carving with some speed, start with Venom standard with the cups. Orange Front, Yellow rear. That is assuming a top mount (not dropped or thru).
That what you were looking for?
Chadd
Carving with some speed, start with Venom standard with the cups. Orange Front, Yellow rear. That is assuming a top mount (not dropped or thru).
That what you were looking for?
Chadd
Chadd Hall
Sep 14, 2009, 11:11:31 AM9/14/09
to longboar...@googlegroups.com
How much do you weigh Ha?
AlG
Sep 14, 2009, 11:12:44 AM9/14/09
to Longboard-Atlanta
I'll take a 5-pack of Roger Bros. Soles, too.
> ...
>
> read more »- Hide quoted text -
>
> read more »- Hide quoted text -
Ha Nguyen
Sep 14, 2009, 11:14:36 AM9/14/09
to longboar...@googlegroups.com
Around 190lbs
On Sep 14, 2009 11:12 AM, "AlG" <algarc...@hotmail.com> wrote:
I'll take a 5-pack of Roger Bros. Soles, too.
On Sep 14, 11:07 am, Shift <warbud...@gmail.com> wrote: > Chadd, KCL still needs help picking bush...
> ...
>
> read more »- Hide quoted text -
> > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this mes...
Colonel Forbin
Sep 14, 2009, 11:18:41 AM9/14/09
to Longboard-Atlanta
so when I went to stoked just now to narrow down my bushing selection
the home page photo was... ....just wait
team rider Chadd Hall!
We've got a celebrity in our midst
haha just playin w ya chadd, congrats on the picture though, it looks
cool.
get me 2 orders of the 85a blue Khiro bitch (buy 2 for 1 complete set
up)
1 order Venom standard 85a barrell + cone
1 order Venom elims 85a
just wondering chadd on the evo setup you put a lime green set up
front and a neon orange set in back.
is lime 80a reflex?
neon orange 81a venom?
originally it was 2 sets lime but the board was biting the ground and
we made the back a little bit harder.
if you remember it'd be sweet but if not i think what i guessed makes
the most sense when looking at color and durometer
> ...
>
> read more »- Hide quoted text -
the home page photo was... ....just wait
team rider Chadd Hall!
We've got a celebrity in our midst
haha just playin w ya chadd, congrats on the picture though, it looks
cool.
get me 2 orders of the 85a blue Khiro bitch (buy 2 for 1 complete set
up)
1 order Venom standard 85a barrell + cone
1 order Venom elims 85a
just wondering chadd on the evo setup you put a lime green set up
front and a neon orange set in back.
is lime 80a reflex?
neon orange 81a venom?
originally it was 2 sets lime but the board was biting the ground and
we made the back a little bit harder.
if you remember it'd be sweet but if not i think what i guessed makes
the most sense when looking at color and durometer
>
> read more »- Hide quoted text -
Shift
Sep 14, 2009, 11:32:09 AM9/14/09
to Longboard-Atlanta
I'll update the list when I get home and I'll ask everyone to go over
it one last time before we agree it's final.
On Sep 14, 11:18 am, Colonel Forbin <ale...@students.kennesaw.edu>
wrote:
> ...
>
> read more »
it one last time before we agree it's final.
On Sep 14, 11:18 am, Colonel Forbin <ale...@students.kennesaw.edu>
wrote:
>
> read more »
John (illiterate)
Sep 14, 2009, 11:34:28 AM9/14/09
to Longboard-Atlanta
put me down for 2 packs of those roger bro's soles.
chad...@gmail.com
Sep 14, 2009, 11:36:15 AM9/14/09
to LBA
Packs? They are sold as singles.
C
-----Original Message-----
From: "John (illiterate)" <ment...@aol.com>
Date: Mon, 14 Sep 2009 08:34:28
C
-----Original Message-----
From: "John (illiterate)" <ment...@aol.com>
Date: Mon, 14 Sep 2009 08:34:28
John (illiterate)
Sep 14, 2009, 11:51:26 AM9/14/09
to Longboard-Atlanta
oh the humanity. order me 5 large SINGLE soles, then.
> put me down for 2 packs of those roger bro's soles.- Hide quoted text -
chad...@gmail.com
Sep 14, 2009, 11:51:37 AM9/14/09
to LBA
Just don't want to screw up the order. I have tons of contact cement at the house for when everyone wants to do these soles.
C
-----Original Message-----
From: "John (illiterate)" <ment...@aol.com>
Date: Mon, 14 Sep 2009 08:51:26
C
-----Original Message-----
From: "John (illiterate)" <ment...@aol.com>
Date: Mon, 14 Sep 2009 08:51:26
Chadd Hall
Sep 14, 2009, 12:52:04 PM9/14/09
to LBA
Ha - You might want to go with black JimZ.
Ha Nguyen
Sep 14, 2009, 1:23:18 PM9/14/09
to longboar...@googlegroups.com
I shall follow your advice oh master of bushings. Scratch my order and add a set of black JimZ
On Sep 14, 2009 12:52 PM, "Chadd Hall" <chad...@gmail.com> wrote:
Ha - You might want to go with black JimZ.
On Mon, Sep 14, 2009 at 11:51 AM, <chad...@gmail.com> wrote: > > Just don't want to screw up the...
Colonel Forbin
Sep 14, 2009, 1:26:06 PM9/14/09
to Longboard-Atlanta
Chadd - what do you put in pivot cups to stop the noise?
> > > - Show quoted text -- Hide quoted text -
chad...@gmail.com
Sep 14, 2009, 1:29:54 PM9/14/09
to LBA
Ivory soap dust.
-----Original Message-----
From: Colonel Forbin <ale...@students.kennesaw.edu>
Date: Mon, 14 Sep 2009 10:26:06
-----Original Message-----
From: Colonel Forbin <ale...@students.kennesaw.edu>
Date: Mon, 14 Sep 2009 10:26:06
John (illiterate)
Sep 14, 2009, 1:50:51 PM9/14/09
to Longboard-Atlanta
graphite aka pencil
Shift
Sep 14, 2009, 3:59:38 PM9/14/09
to Longboard-Atlanta
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL-
x1 Precision bones swiss bearings
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
bushings for Grizzly 852s (last thing to be confirmed. He'll be using
my bushings to figure out what he wants this afternoon so we should be
able to finish this up)
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
John-
5x RoBros brake soles
the order finalized by tonight if everyone signs off on their part.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL-
x1 Precision bones swiss bearings
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
my bushings to figure out what he wants this afternoon so we should be
able to finish this up)
Ross-
1x pack of white Jimz
1x pack of black Jimz
John-
5x RoBros brake soles
Ha Nguyen
Sep 14, 2009, 4:09:21 PM9/14/09
to longboar...@googlegroups.com
Add 3 robro brake soles and 2 sets of trusshead 1.25' hardware to Ha's order.
On Sep 14, 2009 3:59 PM, "Shift" <warb...@gmail.com> wrote:
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Billy- 1x Killswitch 1x pack of Vicious 1x pack of 1.25" trusshead hardware 2x 2.75" kingpins Al- ...
5x RoBros brake soles
Graham- 1x set of bearing spacers Alex- 1x pack of Vicious 2x sets of speed rings 2x sets of beari...
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian- 1x set of Biltins 1x pack of white Jimz bushings Aldrian- 2x 1.25" trusshead hardware 1x set ...
bushings for Grizzly 852s (last thing to be confirmed. He'll be using
my bushings to figure out what he wants this afternoon so we should be
able to finish this up)
Ross- 1x pack of white Jimz
Ha-
1x pack of black Jimz
John-
5x RoBros brake soles
On Sep 14, 1:50 pm, "John (illiterate)" <mental...@aol.com> wrote: > graphite aka pencil > > On Sep...
Shift
Sep 14, 2009, 4:30:51 PM9/14/09
to Longboard-Atlanta
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
the order finalized by tonight if everyone signs off on their part.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL-
x1 Precision bones swiss bearings
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
KCL-
x1 Precision bones swiss bearings
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
bushings for Grizzly 852s (last thing to be confirmed. He'll be
using
my bushings to figure out what he wants this afternoon so we should
be
able to finish this up)
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
using
my bushings to figure out what he wants this afternoon so we should
be
able to finish this up)
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
3x RoBros brake soles
John-
5x RoBros brake soles
5x RoBros brake soles
On Sep 14, 4:09 pm, Ha Nguyen <hanguye...@gmail.com> wrote:
> Add 3 robro brake soles and 2 sets of trusshead 1.25' hardware to Ha's
> order.
>
> Add 3 robro brake soles and 2 sets of trusshead 1.25' hardware to Ha's
> order.
>
Message has been deleted
John (illiterate)
Sep 14, 2009, 4:39:19 PM9/14/09
to Longboard-Atlanta
John-
5x RoBros brake soles (Large. i has big feet)
Confirmed.
> > graphite aka pencil > > On Sep...- Hide quoted text -
5x RoBros brake soles (Large. i has big feet)
Confirmed.
Shift
Sep 14, 2009, 4:57:12 PM9/14/09
to Longboard-Atlanta
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Since the brake soles can be cut to size (I assume) they'll all be the
the order finalized by tonight if everyone signs off on their part.
large size to make it easier.
Billy- Confirmed
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL- Confirmed
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
x1 Precision bones swiss bearings
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
1x yellow Venom standards
x1 Khiro angled riser pads 80a
x4 (4 foot) insanley grippy griptape
2x 2.75" kingpins
1x orange Venom standards
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
5x RoBros brake soles
Ha Nguyen
Sep 14, 2009, 5:05:04 PM9/14/09
to longboar...@googlegroups.com
Confirming 3 brake soles 2 sets of 1.25 trusshead hardwat 1 set of black jimZ
On Sep 14, 2009 4:57 PM, "Shift" <warb...@gmail.com> wrote:Everyone on the list please check your order. I would like to have the order finalized by tonight ...
Since the brake soles can be cut to size (I assume) they'll all be the
large size to make it easier.
Billy- Confirmed
1x Killswitch 1x pack of Vicious 1x pack of 1.25" trusshead hardware 2x 2.75" kingpins Al- 1x set o...
KCL- Confirmed
x1 Precision bones swiss bearings x1 Khiro angled riser pads 80a x4 (4 foot) insanley grippy griptap...
1x yellow Venom standards
1x orange Venom standards
Ross- 1x pack of white Jimz Ha- 1x pack of black Jimz 2x sets of 1.25" trusshead hardware 3x RoBro...
John- Confirmed
5x RoBros brake soles
On Sep 14, 4:39 pm, "John (illiterate)" <mental...@aol.com> wrote: > John- > 5x RoBros brake soles ...
Shift
Sep 14, 2009, 5:16:49 PM9/14/09
to Longboard-Atlanta
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Since the brake soles can be cut to size (I assume) they'll all be
the
large size to make it easier.
Billy- Confirmed
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
the
large size to make it easier.
Billy- Confirmed
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL- Confirmed
1x Precision bones swiss bearings
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL- Confirmed
1x Khiro angled riser pads 80a
4x (4 foot) insanley grippy griptape
4x 2.75" kingpins
1x yellow Venom standards
1x orange Venom standards
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
1x orange Venom standards
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
Shift
Sep 14, 2009, 5:18:44 PM9/14/09
to Longboard-Atlanta
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Since the brake soles can be cut to size (I assume) they'll all be
the
large size to make it easier.
Billy- Confirmed
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
the
large size to make it easier.
Billy- Confirmed
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL- Confirmed
4x 2.75" kingpins
5x RoBros brake soles
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL- Confirmed
1x Precision bones swiss bearings
1x Khiro angled riser pads 80a
4x (4 foot) insanley grippy griptape
4x 2.75" kingpins
1x yellow Venom standards
1x orange Venom standards
Ross-
1x pack of white Jimz
Ha- Confirmed
1x orange Venom standards
Ross-
1x pack of white Jimz
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
2x sets of 1.25" trusshead hardware
AlG
Sep 14, 2009, 5:35:35 PM9/14/09
to Longboard-Atlanta
Al- confirmed
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
4x 2.75" kingpins
5x RoBros brake soles
Ross S
Sep 14, 2009, 6:25:37 PM9/14/09
to Longboard-Atlanta
yep, you got it!
aldrian80
Sep 14, 2009, 8:41:09 PM9/14/09
to Longboard-Atlanta
Aldrian- Confirmed !!!!
2x 1.25" trusshead hardware
1x set of Indy 169s
1x set of Indy 169s
Shift
Sep 14, 2009, 9:01:32 PM9/14/09
to Longboard-Atlanta
Everyone on the list please check your order. I would like to have
the order finalized by tonight if everyone signs off on their part.
Since the brake soles can be cut to size (I assume) they'll all be
the large size to make it easier.
CONFIRMED:
the order finalized by tonight if everyone signs off on their part.
Since the brake soles can be cut to size (I assume) they'll all be
the large size to make it easier.
Billy-
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al-
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Aldrian-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL-
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL-
1x Precision bones swiss bearings
1x Khiro angled riser pads 80a
4x (4 foot) insanley grippy griptape
4x 2.75" kingpins
1x yellow Venom standards
1x orange Venom standards
Ross-
1x pack of white Jimz
Ha-
1x Khiro angled riser pads 80a
4x (4 foot) insanley grippy griptape
4x 2.75" kingpins
1x yellow Venom standards
1x orange Venom standards
Ross-
1x pack of white Jimz
Ha-
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
John-
5x RoBros brake soles
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
John-
UNCOMFIRMED:
Graham-
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
1x set of bearing spacers
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
1x yellow 85a Venom standards
1x yellow 85a Venom Elims
Ian-
1x set of Biltins
1x pack of white Jimz bushings
Colonel Forbin
Sep 15, 2009, 2:47:32 PM9/15/09
to Longboard-Atlanta
that's what I want. confirmed.
> > > > > 5x RoBros brake soles- Hide quoted text -
Chadd Hall
Sep 15, 2009, 2:59:01 PM9/15/09
to longboar...@googlegroups.com
Alex - You realize that: They are each enough for ONE truck, correct?
> 1x yellow 85a Venom standards
> 1x yellow 85a Venom Elims
Everyone else - There are some out of stock items on this list, we will be waiting for them as a whole. Do you want a chance to amend the order once I find out what is in stock?
Chadd
> 1x yellow 85a Venom standards
> 1x yellow 85a Venom Elims
Chadd
AlG
Sep 15, 2009, 3:04:34 PM9/15/09
to Longboard-Atlanta
Chadd-
Can we split the order between in/out-of-stock items? I am needing the
RoBros Soles pretty bad.
> > > - Show quoted text -- Hide quoted text -
Can we split the order between in/out-of-stock items? I am needing the
RoBros Soles pretty bad.
Colonel Forbin
Sep 15, 2009, 3:06:16 PM9/15/09
to Longboard-Atlanta
no i did not realize that. thank you Chadd for lookin out. I thought
it was for 2 trucks. make that double on the venoms for me.
if anything I ordered is out of stock i'll amend my order to expediate
the process.
> > > - Show quoted text -- Hide quoted text -
it was for 2 trucks. make that double on the venoms for me.
if anything I ordered is out of stock i'll amend my order to expediate
the process.
Shift
Sep 15, 2009, 3:24:15 PM9/15/09
to Longboard-Atlanta
Alex-
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
2x yellow 85a Venom standards
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
2x yellow 85a Venom Elims
UNCOMFIRMED:
Graham-
1x set of bearing spacers
Ian-
1x set of Biltins
1x pack of white Jimz bushing
1x set of Biltins
1x pack of white Jimz bushing
Colonel Forbin
Sep 15, 2009, 5:02:26 PM9/15/09
to Longboard-Atlanta
just in case you need confirmation on the additional bushings - here
it is.
> > > > > > 5x RoBros brake soles- Hide quoted text -
it is.
Ian Kalway
Sep 15, 2009, 5:11:35 PM9/15/09
to longboar...@googlegroups.com
CONFIRM MINE PEAS
chad...@gmail.com
Sep 15, 2009, 5:13:55 PM9/15/09
to LBA
Are we done yet Billy? Its going to take me some time to put together pricing. It would help to add email addys for each name. But I am not tellin you that you have to.
C
-----Original Message-----
From: Ian Kalway <ian.k...@gmail.com>
Date: Tue, 15 Sep 2009 17:11:35
To: <longboar...@googlegroups.com>
C
-----Original Message-----
From: Ian Kalway <ian.k...@gmail.com>
Date: Tue, 15 Sep 2009 17:11:35
To: <longboar...@googlegroups.com>
Subject: [Longboard-Atlanta] Re: Group order?
Chadd Hall
Sep 15, 2009, 7:39:18 PM9/15/09
to LBA
Ian - You do know that Biltins come as an 8 pack, you'll need 16 for your rollerblades...
Ian Kalway
Sep 15, 2009, 8:17:20 PM9/15/09
to longboar...@googlegroups.com
shit..... ah well... i guess no derby this time
Shift
Sep 15, 2009, 10:47:59 PM9/15/09
to Longboard-Atlanta
Chadd, everyone except Graham has confirmed their orders. I think
I've got all of the email addresses and I'll post them next to each
person's order.
Billy- third_...@yahoo.com
5x RoBros brake soles
Alex- ale...@students.kennesaw.edu
Graham- theg...@hotmail.com
> I might be able to shuffle some things around financially and I could
> be ordering my Killswitch this weekend. I'll be ordering 2 packs of
> Vicious, some hardware, the Killswitch and I would like a freeride
> wheel that's grippier than my Flashbacks and Omar's Obombers (I was
> thinking 78a Gumballs? Other [cheap] suggestions?), but I doubt I
> could pay for them this week.
>
> Chadd mentioned Sunday how he could hook us up with some killer deals
> from Stoked, plus it would give me another excuse to get out to
> Gwinnett again.
I've got all of the email addresses and I'll post them next to each
person's order.
Billy- third_...@yahoo.com
1x Killswitch
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
Al- algarc...@hotmail.com
1x pack of Vicious
1x pack of 1.25" trusshead hardware
2x 2.75" kingpins
1x set of orange In Heatz
4x 2.75" kingpins
5x RoBros brake soles
Aldrian- ald...@gmail.com
4x 2.75" kingpins
5x RoBros brake soles
2x 1.25" trusshead hardware
1x set of Indy 169s
KCL- kevin...@gmail.com
1x set of Indy 169s
1x Precision bones swiss bearings
1x Khiro angled riser pads 80a
4x (4 foot) insanley grippy griptape
4x 2.75" kingpins
1x yellow Venom standards
1x orange Venom standards
Ross- elix...@hotmail.com
1x Khiro angled riser pads 80a
4x (4 foot) insanley grippy griptape
4x 2.75" kingpins
1x yellow Venom standards
1x orange Venom standards
1x pack of white Jimz
Ha- hangu...@gmail.com
1x pack of black Jimz
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
John- ment...@aol.com
2x sets of 1.25" trusshead hardware
3x RoBros brake soles
5x RoBros brake soles
Alex- ale...@students.kennesaw.edu
1x pack of Vicious
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
2x yellow 85a Venom standards
2x yellow 85a Venom Elims
Ian- ian.k...@gmail.com
2x sets of speed rings
2x sets of bearing spacers
2x blue 85a Khiro Bitch bushings
2x yellow 85a Venom standards
2x yellow 85a Venom Elims
1x set of Biltins
1x pack of white Jimz bushing
UNCOMFIRMED:
1x pack of white Jimz bushing
Graham- theg...@hotmail.com
1x set of bearing spacers
On Sep 9, 6:54 pm, Shift <warbud...@gmail.com> wrote:
> I might be able to shuffle some things around financially and I could
> be ordering my Killswitch this weekend. I'll be ordering 2 packs of
> Vicious, some hardware, the Killswitch and I would like a freeride
> wheel that's grippier than my Flashbacks and Omar's Obombers (I was
> thinking 78a Gumballs? Other [cheap] suggestions?), but I doubt I
> could pay for them this week.
>
> Chadd mentioned Sunday how he could hook us up with some killer deals
> from Stoked, plus it would give me another excuse to get out to
> Gwinnett again.
chad...@gmail.com
Sep 15, 2009, 10:55:45 PM9/15/09
to LBA
Ok, no more changes. I have a couple of hours worth of pricing to do.
C
-----Original Message-----
From: Shift <warb...@gmail.com>
Date: Tue, 15 Sep 2009 19:47:59
To: Longboard-Atlanta<longboar...@googlegroups.com>
C
-----Original Message-----
From: Shift <warb...@gmail.com>
Date: Tue, 15 Sep 2009 19:47:59
To: Longboard-Atlanta<longboar...@googlegroups.com>
Subject: [Longboard-Atlanta] Re: Group order?
sognarbongloard
Sep 16, 2009, 12:27:38 AM9/16/09
to Longboard-Atlanta
Add 1 pair of 187 pro knee pads size large. It's definitely an
immediate need.
On Sep 11, 4:23 am, Shift <warbud...@gmail.com> wrote:
> Personally, I love Sabre bushings, but unfortuneatly Stoked doesn't
> carry them. I have Sabre barrels in all of my trucks. Venom is my
> second choice, though and for carving low duro double barrels are my
> favorite. They have plenty of rebound while still having a ton of
> lean.
>
> As for the order:
>
> Billy-
>
> > Alex-
> > I get flat washers for all my bushings or if I get a good fitting
> > cupped washer I'll use it. You can get washers for pennies at Home
> > Depot compared to what on-line skate shops will charge. Woody's has
> > always hooked me when I go in there for bushings.
> > I like Venoms as they feel really smooth. Reflex feel good but have
> > tons of rebound, IMO. Paris felt like hard pieces of plastic. Keep the
> > stock cone bushings to play around with Barrel/Cone combos. I threw
> > 85a Venom barrel/cone combo on my bro's R-180's and it felt awesome
> > for carving and still felt pretty stable.
>
> > On Sep 10, 11:52 pm, Ian Kalway <ian.kal...@gmail.com> wrote:
>
> > > i need builtin bearings for randals..... - IAN
>
> > > On Thu, Sep 10, 2009 at 11:22 PM, Colonel Forbin
>
> > > <ale...@students.kennesaw.edu> wrote:
>
> > > > its for my dervish. it wont be for extreme downhill. and i want to
> > > > have a range of durometers to experiment with. i guess what im really
> > > > asking is what companies different people like so i can order several
> > > > different hardnesses of the same bushing. i was thinkin i was gonna go
> > > > with a couple sets of barrel shaped to start. will i need to order
> > > > washers for bearing set up?
>
> > > > On Sep 10, 10:32 pm, AlG <algarcia_...@hotmail.com> wrote:
> > > >> what board and what do you want them to do?
>
> > > >> Extremely useful info here to start with:http://www.silverfishlongboarding.com/forum/longboard-skateboarding-t...
>
> > > >> I personally like the feel of Venom Barrels.
> > > >> For DH I like Elims and Barrels.
>
> > > >> Playing with you bushing set-up is fun and can really make your board
> > > >> your own.
>
> > > >> On Sep 10, 10:28 pm, Colonel Forbin <ale...@students.kennesaw.edu>
> > > >> wrote:
>
> > > >> > for me add: 1 vicious grip tape pack, two sets of speed rings, and two
> > > >> > sets of bearing spacers
>
> > > >> > I want to order some bushings to start experimenting with my randal
> > > >> > 180's but I don;t even know where to start..
>
> > > >> > advice?
>
> > > >> > On Sep 10, 10:01 pm, AlG <algarcia_...@hotmail.com> wrote:
>
> > > >> > > add 4 more 2.75 kingpins.
>
> > > >> > > On Sep 10, 7:53 pm, Shift <warbud...@gmail.com> wrote:
>
> > > >> > > > Oh and 2x 2.75" kingpins and one set of those spacers needs to be for
> > > >> > > > 10mm axles.
>
> > > >> > > > On Sep 10, 7:29 pm, Shift <warbud...@gmail.com> wrote:
>
> > > >> > > > > Right now it looks like the order is sitting at:
>
> > > >> > > > > 1x Rayne Killswitch
> > > >> > > > > 2x Vicious griptape
> > > >> > > > > 1x 1" trusshead hardware
> > > >> > > > > 1x 1.25" trusshead hardware
> > > >> > > > > 1x set of 10mm bearings (possibly)
>
> > > >> > > - Show quoted text -- Hide quoted text -
immediate need.
On Sep 11, 4:23 am, Shift <warbud...@gmail.com> wrote:
> Personally, I love Sabre bushings, but unfortuneatly Stoked doesn't
> carry them. I have Sabre barrels in all of my trucks. Venom is my
> second choice, though and for carving low duro double barrels are my
> favorite. They have plenty of rebound while still having a ton of
> lean.
>
> As for the order:
>
> Billy-
> 1x Killswitch
> 1x pack of Vicious
> 1x pack of 1.25" trusshead hardware
> 2x 2.75" kingpins
>
> Al-
> 1x pack of Vicious
> 1x pack of 1.25" trusshead hardware
> 2x 2.75" kingpins
>
> Al-
> 1x set of orange In Heatz
> 4x 2.75" kingpins
>
> Graham-
> 4x 2.75" kingpins
>
> 1x set of bearing spacers
>
> Alex-
>
> 1x pack of Vicious
> 2x sets of speed rings
> 2x sets of bearing spacers
> bushings
> 2x sets of speed rings
> 2x sets of bearing spacers
>
> Ian-
> 1x set of Biltins
>
> On Sep 11, 5:58 am, AlG <algarcia_...@hotmail.com> wrote:
> Ian-
> 1x set of Biltins
>
>
> > Alex-
> > I get flat washers for all my bushings or if I get a good fitting
> > cupped washer I'll use it. You can get washers for pennies at Home
> > Depot compared to what on-line skate shops will charge. Woody's has
> > always hooked me when I go in there for bushings.
> > I like Venoms as they feel really smooth. Reflex feel good but have
> > tons of rebound, IMO. Paris felt like hard pieces of plastic. Keep the
> > stock cone bushings to play around with Barrel/Cone combos. I threw
> > 85a Venom barrel/cone combo on my bro's R-180's and it felt awesome
> > for carving and still felt pretty stable.
>
> > On Sep 10, 11:52 pm, Ian Kalway <ian.kal...@gmail.com> wrote:
>
> > > i need builtin bearings for randals..... - IAN
>
> > > On Thu, Sep 10, 2009 at 11:22 PM, Colonel Forbin
>
> > > <ale...@students.kennesaw.edu> wrote:
>
> > > > its for my dervish. it wont be for extreme downhill. and i want to
> > > > have a range of durometers to experiment with. i guess what im really
> > > > asking is what companies different people like so i can order several
> > > > different hardnesses of the same bushing. i was thinkin i was gonna go
> > > > with a couple sets of barrel shaped to start. will i need to order
> > > > washers for bearing set up?
>
> > > > On Sep 10, 10:32 pm, AlG <algarcia_...@hotmail.com> wrote:
> > > >> what board and what do you want them to do?
>
> > > >> Extremely useful info here to start with:http://www.silverfishlongboarding.com/forum/longboard-skateboarding-t...
>
> > > >> I personally like the feel of Venom Barrels.
> > > >> For DH I like Elims and Barrels.
>
> > > >> Playing with you bushing set-up is fun and can really make your board
> > > >> your own.
>
> > > >> On Sep 10, 10:28 pm, Colonel Forbin <ale...@students.kennesaw.edu>
> > > >> wrote:
>
> > > >> > for me add: 1 vicious grip tape pack, two sets of speed rings, and two
> > > >> > sets of bearing spacers
>
> > > >> > I want to order some bushings to start experimenting with my randal
> > > >> > 180's but I don;t even know where to start..
>
> > > >> > advice?
>
> > > >> > On Sep 10, 10:01 pm, AlG <algarcia_...@hotmail.com> wrote:
>
> > > >> > > add 4 more 2.75 kingpins.
>
> > > >> > > On Sep 10, 7:53 pm, Shift <warbud...@gmail.com> wrote:
>
> > > >> > > > Oh and 2x 2.75" kingpins and one set of those spacers needs to be for
> > > >> > > > 10mm axles.
>
> > > >> > > > On Sep 10, 7:29 pm, Shift <warbud...@gmail.com> wrote:
>
> > > >> > > > > Right now it looks like the order is sitting at:
>
> > > >> > > > > 1x Rayne Killswitch
> > > >> > > > > 2x Vicious griptape
> > > >> > > > > 1x 1" trusshead hardware
> > > >> > > > > 1x 1.25" trusshead hardware
> > > >> > > > > 1x set of 10mm bearings (possibly)
> > > >> > > > > 2x sets of bearing spacers
> > > >> > > > > 1x set of orange In-Heats
>
> > > >> > > > > On Sep 9, 6:54 pm, Shift <warbud...@gmail.com> wrote:
>
> > > >> > > > > > I might be able to shuffle some things around financially and I could
> > > >> > > > > > be ordering my Killswitch this weekend. I'll be ordering 2 packs of
> > > >> > > > > > Vicious, some hardware, the Killswitch and I would like a freeride
> > > >> > > > > > wheel that's grippier than my Flashbacks and Omar's Obombers (I was
> > > >> > > > > > thinking 78a Gumballs? Other [cheap] suggestions?), but I doubt I
> > > >> > > > > > could pay for them this week.
>
> > > >> > > > > > Chadd mentioned Sunday how he could hook us up with some killer deals
> > > >> > > > > > from Stoked, plus it would give me another excuse to get out to
> > > >> > > > > > Gwinnett again.- Hide quoted text -
> > > >> > > > > On Sep 9, 6:54 pm, Shift <warbud...@gmail.com> wrote:
>
> > > >> > > > > > I might be able to shuffle some things around financially and I could
> > > >> > > > > > be ordering my Killswitch this weekend. I'll be ordering 2 packs of
> > > >> > > > > > Vicious, some hardware, the Killswitch and I would like a freeride
> > > >> > > > > > wheel that's grippier than my Flashbacks and Omar's Obombers (I was
> > > >> > > > > > thinking 78a Gumballs? Other [cheap] suggestions?), but I doubt I
> > > >> > > > > > could pay for them this week.
>
> > > >> > > > > > Chadd mentioned Sunday how he could hook us up with some killer deals
> > > >> > > > > > from Stoked, plus it would give me another excuse to get out to
>
> > > >> > > - Show quoted text -- Hide quoted text -
Chadd Hall
Sep 16, 2009, 5:50:01 AM9/16/09
to longboar...@googlegroups.com
Don't bother with the 187's, good pads, bad availability. I ordered some in May and the vendor still hasnt gotten them out.
C
C
G. Kosiba
Sep 16, 2009, 9:11:36 AM9/16/09
to Longboard-Atlanta
Sorry. Graham Confirmed.
On Sep 16, 5:50 am, Chadd Hall <chaddh...@gmail.com> wrote:
> Don't bother with the 187's, good pads, bad availability. I ordered some in
> May and the vendor still hasnt gotten them out.
>
> C
>
On Sep 16, 5:50 am, Chadd Hall <chaddh...@gmail.com> wrote:
> Don't bother with the 187's, good pads, bad availability. I ordered some in
> May and the vendor still hasnt gotten them out.
>
> C
>
Chadd Hall
Sep 16, 2009, 9:21:08 AM9/16/09
to longboar...@googlegroups.com
This thread is now officially closed. No changes, no adds, no deletions.
I will contact you off-list if you are on the order.
Chadd
I will contact you off-list if you are on the order.
Chadd
Ross S
Sep 16, 2009, 1:06:26 PM9/16/09
to Longboard-Atlanta
but we have to make it to 100 replies! only need three more!
On Sep 16, 9:21 am, Chadd Hall <chaddh...@gmail.com> wrote:
> This thread is now officially closed. No changes, no adds, no deletions.
> I will contact you off-list if you are on the order.
> Chadd
>
On Sep 16, 9:21 am, Chadd Hall <chaddh...@gmail.com> wrote:
> This thread is now officially closed. No changes, no adds, no deletions.
> I will contact you off-list if you are on the order.
> Chadd
>
hoang nguyen
Sep 16, 2009, 1:24:43 PM9/16/09
to longboar...@googlegroups.com
100!!
On Sep 16, 2009 1:06 PM, "Ross S" <elix...@hotmail.com> wrote:
but we have to make it to 100 replies! only need three more!
On Sep 16, 9:21 am, Chadd Hall <chaddh...@gmail.com> wrote: > This thread is now officially closed....
> On Wed, Sep 16, 2009 at 9:11 AM, G. Kosiba <thegra...@hotmail.com> wrote: > > > Sorry. Graham Conf...
It is loading more messages.
0 new messages