Training for mill & lathe

[David N]

Hi all,

Was hoping to get some training for the Bridgeport Mill. I used my universities knee mill about 5 years ago and I have a small CNC mill back home in Scotland which I haven't use in a while! So not a complete beginner, but would appreciate starting from the ground up. I've seen other messages here talking about renumeration for such training, would happily contribute something towards it! 

Would also be interested in lathe training.

Many thanks,

David.

[John Sinha]

Hi All,

I'd also be interested in getting trained on the Bridgeport.

Many thanks,

John

--
https://groups.google.com/forum/?hl=en-GB#!forum/london-hackspace-metal-working-group
---
You received this message because you are subscribed to the Google Groups "London HackSpace Metal Working Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to london-hackspace-metal-w...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/london-hackspace-metal-working-group/6f3d0046-4c5c-4e09-9332-b5682a655c9bn%40googlegroups.com.

[Colin Woof]

Me as well, I’d be keen to learn to operate the mill and lathe. I work as an engineer and Am Keen to learn what the tool room guys know - they seem to know the most at work. I own a round column rong fu mill that’s up in Glasgow just now. I’ve also operated lathes under the instruction of others so am not a complete newbie, but some instruction would be great.

Get Outlook for iOS

---

From: london-hackspace-m...@googlegroups.com <london-hackspace-m...@googlegroups.com> on behalf of John Sinha <sinha...@gmail.com>
Sent: Tuesday, February 22, 2022 4:18:50 PM
To: london-hackspace-m...@googlegroups.com <london-hackspace-m...@googlegroups.com>
Subject: Re: [LHS-Metal] Training for mill & lathe

 

To view this discussion on the web, visit https://groups.google.com/d/msgid/london-hackspace-metal-working-group/CAGN4r9E8a-uEFHZRBAsVZxt_MgpqKJjzDnVpTfGxZXx4fg36Bg%40mail.gmail.com.