Lasercutter down for maintenance - 07/03/11 17:00 - 19:00

14 views
Skip to first unread message

Charles Yarnold

unread,
Mar 6, 2011, 1:06:23 PM3/6/11
to Hackspace Mailing List
Hello,

Due to a slight degradation of power, and having had >40 hours of cutting time, I plan to strip down the cutter for a clean out and realign on Monday evening.

Please don't plan to use the laser cutter between 17:00 and 19:00, if the laser gods smile upon me I will be finished well within this time, but I may run over.

Sol

Charles Yarnold

unread,
Mar 7, 2011, 11:59:31 AM3/7/11
to Hackspace Mailing List
This will be pushed back an hour to 18:00 - 20:00

Sol

Charles Yarnold

unread,
Mar 7, 2011, 3:13:42 PM3/7/11
to Hackspace Mailing List
Thanks to help from Matt, the cutter is not back up, cleaned out and back to full power.

Also it now cuts the side angles evenly.

All hail the laser gods!

Sol

Dave Ingram

unread,
Mar 7, 2011, 3:16:12 PM3/7/11
to london-h...@googlegroups.com, Charles Yarnold
On 07/03/11 20:13, Charles Yarnold wrote:
> Thanks to help from Matt, the cutter is not back up, cleaned out and
> back to full power.
I hope you mean "now" ;-)

Good news!


D

Reply all
Reply to author
Forward
0 new messages