Free K40 Laser cutter

[Tim Jacobs]

I have an old K40 CO2 laser cutter that is now surplus to requirements.
If anyone wants it they can have it, bearing in mind:

- It was bought in 2016 and still technically works
- The control board is Moshidraw 2015, notably this is too old to be
supported by K40 Whisperer. I would strongly recommend upgrading the
control board, I just never got around to it
- The tube has been replaced twice. There is probably still plenty of
life left in the tube as I never ran it at high current
- The laser power supply was replaced only last year and is basically new
- It has a DIY air assist upgrade, with a tiny air pump, could benefit
from an upgrade
- It needs water cooling, I just had a 5L container of water under the desk
- It needs a new extractor hose

The whole thing is quite grotty after years of laser cutting residue.
With a cleanup and a new control board, possibly new optics if you're
feeling fancy, this could provide many more years of cutting. Or, if
someone wants to harvest the parts or convert it into a hand-held laser
cannon I guess that's fine too.

Main thing to note is that I can't provide much support, I'm giving this
away (or to the dump if no one wants it) on condition I won't be hassled
for help with it.

[Adrian Godwin]

I also have a k40 I'm not using. The two together might make one decent unit.

--
You received this message because you are subscribed to the Google Groups "London Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to london-hack-sp...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/london-hack-space/2e24c790-7adf-4061-a208-a553f414fb78%40mitxela.com.

[Daniel Ross]

Yes please can I! 

[Tripp Yeoman]

Hi there, I'd be interested in both these units. I've messaged you both, let me know if you'd like to work out a time for me to pick up!

All the best,

Tripp