1x64 Splitter

[Lu Rounsaville]

TheClearfield WaveSmart Ruggedized Splitter is the standard splitter component in its line of FieldSmart FSC OSP Cabinets. The splitter addresses environmental and human handling issues that other standard splitters in the industry cannot combat. It provides improved fiber protection, management and maintenance in OSP FTTx deployments.

MeFiberOptic.Com is one of the largest and best 164 fiber optic plc splitter abs module 2.0mm manufacturers and suppliers with rich experience. Welcome to buy our high quality products or wholesale our customized 164 fiber optic plc splitter abs module 2.0mm in stock with our factory. Also, free sample is also available if necessary.

Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.

1x64 ultra-low-loss fiber optical splitter module designed to transmit optical singals in CATV bi-directional network and FTTh application.

This module is specially compliant in the environment that allows a merely optical loss and request for high performance.

It is the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB). The loss table below describes how it works with each box type of signal loss.

Insertion loss in passive optical splitters refers to the loss of power that occurs when light is split and distributed to multiple fibers. The term "insertion loss" is used to describe the power loss that occurs as light passes through an optical splitter. The insertion loss is usually measured in decibels (dB) and represents the ratio of the input power to the output power.

Insertion loss in passive optical splitters is caused by several factors, including the imperfections in the splitter's design, the difference in the refractive index of the materials used in the splitter, and the absorption of light by impurities in the splitter.

The most common types of passive optical splitters are the fused biconic taper (FBT) splitter and the planar lightwave circuit (PLC) splitter. FBT splitters are made by fusing two optical fibers together, while PLC splitters are made using micro-optics technology. Both types of splitters have their own unique insertion loss characteristics.

The insertion loss of the FBT splitter is typically higher than that of the PLC splitter, due to the fact that FBT splitters are made by fusing two optical fibers together, which can cause light to be lost due to imperfections in the splicing technique. On the other hand, PLC splitters are made using micro-optics technology, which reduces the insertion loss by allowing for more precise control of the light distribution.

In summary, insertion loss in passive optical splitters refers to the loss of power that occurs when light is split and distributed to multiple fibers. This loss is caused by several factors such as imperfections in the splitter's design, the difference in the refractive index of the materials used and the absorption of light by impurities. The insertion loss of the FBT splitter is typically higher than that of the PLC splitter.

High Split Ratios: Our 1X64 ABS Box PLC Splitter offers a higher split ratio compared to other standard splitters, making it ideal for scenarios requiring efficient signal distribution to numerous channels.

Versatile Connection Types: Choose between the hot-melt method without an adapter or the adapter-based connection to other ODFs with optical jumpers, providing flexibility in installation and integration.

Optimal Signal Distribution: The 1X64 ABS Box PLC Splitter With SC Connector efficiently divides multiple cores from the local end, ensuring uniform distribution and minimal signal loss for seamless data transmission.

Superior Performance: With impressive performance specifications, including insertion loss of 20.3dB, channel uniformity of 1.5, PDL of 0.4, and return loss of 55dB, our splitter guarantees reliable and consistent signal splitting.

PLC (Planar Lightwave Circuit) Splitters are designed for single-mode applications and provide an even split ratio from one input fiber to multiple output fibers. The 164 PLC Splitter consists of 1 input and 64 output fibers, ensuring consistent split ratios across all fibers. These splitters are available with 900m loose tube single-mode fiber and can be terminated or left unterminated according to your specific needs. Unconnectorized PLC splitters come without connectors, making them easy to splice or connect as required. Their versatility and reliability make them suitable for various optical network setups.

The PLC fiber splitter is designed with a 164 configuration and features an ABS casing. It is compatible with G.657A1 singlemode fiber and has an outer cable diameter of 2.0mm. The product is equipped with SC/APC connectors. It offers 164 ports, with a splitting ratio of 1.56% allocated to each port.

The PLC fiber splitter, featuring a 164 configuration, is enclosed in an LGX cassette casing. The inputs and outputs are conveniently pre-connected with adapters. The product is designed for G.657A1 singlemode fiber and equipped with LC/APC connectors. It offers 164 ports, with a splitting ratio of 1.56% allocated to each port.

164 fiber splitter box can be with 1set 164 module splitter or 2sets 132 module splitters, it is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building.

TELHUA TELECOMMUNICATIONS CO., LIMITED,is a professional manufactures and suppliers of china fiber optic terminal box, fiber optic jumper, optical splitter and fiber adapters,which is located in Shenzhen.

The Planar Lightwave Circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. Features include small size, high reliability, and a wide operating wavelength. The PLC splitter is widely used in all fiber optic networks to realize optical signal power splitting. All products are GR-1221-CORE compliant.

Multicom's fiber optic splitters are available in a wide range of styles and sizes to split or combine light with minimal loss. All splitters are manufactured using a very simple process that produces reliable, low-cost devices. Splitters can be fabricated in custom fiber lengths and with any type of connector. Multicom PLC splitters are available in tube, box, cassette, and rack mount configurations, from 1 to 64 splits, even or customized splits, single and multimode, with any connector type.

Applications:

PLC optical splitters are a key building element for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection attenuation. The compact dimensions of these splitters allow easy installation in cabinets and optical distribution boxes, and are a continuation of other products of Chinese and Korean origin.

According to the Law on sales evidence the seller is obliged to issue the receipt to the buyer. At the same time the seller is obliged to register the accepted payment at the (national) tax administrator online. In case of a technical failure the seller is under obligation to do it within 48 hours at the latest.

Planar lightwave circuit (PLC) optical splitter is a passive advanced components that perform the optical signal splitting in a FTTH PON network. This Fiber optic ribbon splitter 1x64 PLC optical splitter install in rack mount cable splitter is the best choice for large variety of telecom and sensor technology applications. This GPON Splitter is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations (ONU). And the 1x64 fiber splitter allows the service provider to conserve fibers in the backbone.

Once your package leaves our warehouse, we'll send you a shipment notification email. This email includes the carrier name, tracking number, shipping date and items' details. You can click the tracking number to track your package on the carrier's website, like DHL, FedEx or UPS.

Fiber Optic Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and this passive splitter widely used in FTTX PON to realize optical signal power management.

PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN.

a. Do you accept OEM,ODM?

Yes, we accept them .

b. Can you print our LOGO?

Sure, Your LOGO can be printed on the boxes , or products.

c. What's the method of shipment?

We accept all shipment , such as Delievery,ocean transport, land transport , airport transport.

3a8082e126