Asus Flash 3
Olympia Brackin
The current way for general users to update BIOS, usually by the Windows update Tool to update BIOS. But sometimes the operating system is poisoned, or there are a large number of resident programs and other unstable factors, may cause BIOS update to fail. Use ASUS EZ Flash 3 to update the BIOS version without entering the Windows operating system.
Step 4. After clicking the download button, save the BIOS to the USB flash drive, Then unzip (Windows 10 has its own unzip ZIP function), Check if there is a .CAP file in the root directory of the USB flash drive.
3.Q &Ａ
Q1: How to confirm whether my motherboard support ASUS EZ Flash 3?
A1ASUS EZ Flash 3 only applicable to UEFI BIOS motherboards with built-in ASUS EZ flash 3, you can confirm the product specifications from the official website.
Q2: After updating the BIOS, the system may become unstable or crash. What should I do?
A2After updating the BIOS, it is recommended to follow the steps below to restore the BIOS default settings, to avoid system unstable caused by incorrect BIOS setting.
Please refer to the following steps:
1Please enter the BIOS again and press the DEL key on the ASUS Logo.
Note: The USB flash drive format must be FAT32 so that you are able to update BIOS in the BIOS utility. Here you can learn more about How to convert the USB flash drive format to FAT32.
I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards.
I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it.
I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS).
Remember to use a flash drive that is formatted FAT/FAT32 and also rename the file to a short file name such as 1804.ROM Also you have to extract the .ROM file from the .zip file the BIOS downloads from, EZ-Flash does not support ZIP files.
In AI Suite II, click on the update button, then ASUS update. You should see the box for updating the BIOS. It will ask you how you want to update the bios, and you can select "from the Internet", download the BIOS or whatever. I suppose the most direct and easiest way is just to update from the Internet.
Yet, I still can't flash because of FRP error. Actually it is saying unable to unzip file but before that it tried to authenticate from FRP thing and failed. What is this FRP? I tried googling and nobody mention anything about this FRP.
The ASUS Flash Utility v1.13 for WinPE (x86/x64) can flash locked? bioses / extraced bodys / modified BIOS even in no PE but regular W10 environment.
Seems also that the /gan command is back. Flased my Z170 PRO GAMING successfully under regular W10 via cmd: wAsusFUX64.exe modified.rom /gan .
I dont know if thats already known to the public, fyi.
Regards, Ingo
Hello,
Can somebody help me with installing process how can I exactly flash the openwrt firmware? I also have V1 from same model and i flashed it via asus recovery tool with no issue. But with V2 i am sruggling. Any help would be appreciated!
Hello,
Problem solved and the router is flashed with the latest OpenWRT factory release image via Asus FW restoration tool.I've just holded RESET button, then turned on the router and after roughly 5 secs released it and the firmware deployment started(machine IP 192.168.1.75/mask 255.255.255.0).The difference is that I've used my company laptop instead of my own. I presume on my machine there were hidden issues caused by my antivirus(Bitdefender), but still i am not quite sure.
@d687r02j8g and @frollic, thanks for the hints!
tl;dr: Use an old-fashioned USB 2.0 flash drive, format it FAT32, download the firmware, make sure it's named correctly, and use the motherboard's 'BIOS Flashback' option after powering off the computer.
It started with a combo deal from Micro Center: a ASUS ROG Strix B650E-F Gaming WiFi motherboard, a Ryzen 9 7900x CPU, and a G.Skill Flare X5 Series 32GB DDR5-6000 memory kit, all for $599. Quite a beefy upgrade for the main PC I use to compile code and do random Linux-y tasks.
I wanted to enable AMD's 'Eco' mode, which limits the TDP from the stock 170W to either 105W or 65W. And in my own benchmarking (which happened later on, but I'm including the data here because it's kinda insane), the CPU got about 96% of its 170W performance when I limited it to 105W. And at that level, it idled at 45W and maxed out at 206W. Much better.
From there, I could see the BIOS and select it, but when I did, the screen would go to 'Processing', a status bar would start filling, then every time, the PC would just shut down, then try rebooting, and when it did, after the orange DRAM LED lit for a bit, the red CPU LED would light up and stay lit until I removed power from the motherboard.
So next I tried each one with BIOS Flashback, where you make sure the USB drive is attached to a specific port on the motherboard, shut down the computer, and press and hold a 'BIOS Flashback' button nearby until the process begins.
I don't know how motherboard BIOS updates are still so flaky after all these years, but I guess it's better than requiring a USB-to-TTL device and some terminal hacking to flash it like you do on many ARM SBCs!
Yes, you're not just telling him to install AI Suite 3, you're telling him to do the folllowing: install Windows, install drivers, install AI Suite 3 and hope that it's successful. That's possibly multiple hours.
This particular board (B650E-F) does not support BIOS update via Windows - that requires support for EZ Update which is not included when you grab AI Suite 3. I should know - I have the board and I just tried this method based on your comment. :) I'm having similar issues - can't get the latest BIOS installed. I updated it just fine a week ago when I first bought it.
It's not publicly documented anywhere, but some Asus boards support UEFI Capsule Update, which lets you update the UEFI from Linux using `fwupdtool install-blob` and the .CAP file from Asus's website. Works with my B550-I at least.
Capsule Update support is actually a requirement for the Windows 11 sticker they put on the box, if I recall correctly. Asus would just need to push the updates to LVFS to make it hassle-free for Linux users :\
One thing from the get go, one step you shouldn't do is run the Renamer program if you are using EZ Flash 3. Run Renamer only if you are going to use Flashback. The default file .CAP works perfect for me every single time using EZ Flash in the BIOS. In fact, if you rename the BIOS file, EZ Flash wouldn't recognize it.
I bought the same setup at Micro Center. Had some issues getting it to POST at all and couldn't get into the BIOS until I did the BIOS flashback feature. I didn't have any issues with that since I had a USB 2.0 drive formatted with FAT32 and using MBR. I chalk it up to the DDR5 because I also had intermittent booting issues when I used EXPO 1, but they went away after switching to EXPO 2. I also bought two sets of sticks, and I've heard of issues with using 4 sticks of DDR5 so I guess I'm lucky it works at 6000.
Yeah I decided at least at this point to stick with just two sticks of RAM and not tempt fate. It'll be probably a few more BIOS updates before motherboards are really well tuned for higher speed memory profiles.
Thank you so much, I was going crazy with this. Using an older stick with the FlashBack finally worked. I have no idea what AMD did this generation but I've never had that many problems updating the BIOS.
This! I was having issues updating using Asus EZ Update and AI Suite 3, it would not let me boot/POST using a procured i7-4790K CPU that I'd gotten a hold of. Then I saw this post, tried using USB Flashback and it worked!
I am attempting to repair a bricked Asus X53SV notebook (Asus K53SV board) by reflashing with flashrom from a Raspberry Pi. I've got it all hooked up and flashrom recognizes and reads the chip. However, I cannot determine what type of file the BIOS update is that I downloaded from Asus support site. The update I'm using is K53SVAS.315 for Aptio's Easy Flash. How can I extract the raw BIOS from this file?
c80f0f1006