National Plumbing Code Of Canada 2015
Gene Cryder
The Minnesota Plumbing Code contains information about approved materials, safe installation methods and basic plumbing principles. It is important to hire knowledgeable, qualified plumbers and plumbing contractors to make the proper decisions regarding the best materials and methods for plumbing installation.
The code contains requirements for drain, waste, and vent systems, water supply and distribution systems, backflow prevention, water conditioning equipment, roof drainage systems, plumbing fixtures, materials and nonpotable rainwater catchment systems.
The 2020 Minnesota Plumbing Code is published by the International Association of the Plumbing and Mechanical Officials (IAPMO) for Minnesota in a single, reformatted custom code book. It incorporates Minnesota amendments and reads as a unified code book. It also includes Chapter 4716, Plumber Licensing and Apprentice Registration, and Chapter 1300, Minnesota Administration Code.
The National Plumbing Code of Canada (NPC) 2020, developed by the Canadian Commission on Building and Fire Codes and published by the National Research Council of Canada, sets out technical requirements for the design and installation of new plumbing systems, as well as the extension, alteration, renewal and repair of existing plumbing systems.
Over 50 technical changes have been incorporated in this new edition, improving the level of safety, health, water-use efficiency, and protection from water and sewage damage provided by the Code, and expanding design and material options.
The National Plumbing Code of Canada 2020 (NPC), together with the National Building Code of Canada 2020 (NBC), the National Energy Code of Canada for Buildings 2020 (NECB) and the National Fire Code of Canada 2020 (NFC), has been developed by the Canadian Commission on Building and Fire Codes (CCBFC) as an objective-based national model code that can be adopted by provincial and territorial governments.
In Canada, provincial and territorial governments have the authority to enact legislation that regulates the design and installation of plumbing systems within their jurisdictions. This may involve the adoption of the NPC without change or with modifications to suit local needs, and the enactment of other laws and regulations regarding plumbing system design and installation, including requirements for professional involvement.
The NPC is a model code in the sense that it helps promote consistency among provincial and territorial plumbing codes. Persons involved in the design or installation of plumbing systems should consult the provincial or territorial jurisdiction concerned to find out which plumbing code is applicable.
A number of pages on the Government of Saskatchewan's website have been professionally translated in French. These translations are identified by a yellow box in the right or left rail that resembles the link below. The home page for French-language content on this site can be found at:
Software-based translations do not approach the fluency of a native speaker or possess the skill of a professional translator. The translation should not be considered exact, and may include incorrect or offensive language. The Government of Saskatchewan does not warrant the accuracy, reliability or timeliness of any information translated by this system. Some files or items cannot be translated, including graphs, photos and other file formats such as portable document formats (PDFs).
Saskatchewan adopts the National Building Code (NBC), the National Plumbing Code (NPC) and the National Energy Code for Buildings (NECB) as the minimum standard for the construction and renovation of buildings throughout the province under the provision of The Construction Codes Act (CC Act). The National Fire Code is adopted as the minimum standard for the fire safe operation of buildings and facilities under the provision of The Fire Safety Act.
In March 2022, the National Research Council published the 2020 national codes. The Government of Saskatchewan recently adopted these codes by regulation, which came into force on January 1, 2024. Download your free copy of the 2020 national codes by visiting the Codes Canada Publications from the National Research Council.
The NBC 2020, adopted for use throughout Saskatchewan through amendments to The Building Code Regulations, came into effect on January 1, 2024. You will be able to download a copy of the updated regulations after that date from the Publications Centre.
The NFC 2020, adopted for use throughout Saskatchewan through amendments to The Fire Safety Regulations, came into effect on January 1, 2024. You will be able to download an updated copy of the regulations after that date from the Publications Centre.
The NPC 2020, adopted for use throughout Saskatchewan through amendments to The Plumbing Code Regulations, came into effect on January 1, 2024. You will be able to download a copy of the updated regulations after that date from Publications Centre.
The NECB 2020, adopted for use throughout Saskatchewan through amendments to The Energy Code Regulations, came into effect on January 1, 2024. You will be able to download a copy of the updated regulations after that date from Publications Centre.
We test and certify plumbing fixtures to the most highly referenced product standards, including those published by NSF/ANSI, WaterSense, the American Society of Mechanical Engineers (ASME) and ASSE International.
Whether you manufacture plumbing components or major appliances, test and certify your plumbing components to meet health and safety requirements and the highest industry standards in North America for:
Canadian Standards Association (CSA Group) is pleased to announce that it is now a distributor of the National Model Codes, user guides, and commentaries published by the National Research Council of Canada (NRC).
The work of more than 1.2 million construction specialists is governed by National Model Codes. Helping to protect all Canadians, national codes play a significant role in public safety and construction consistency across Canada. Code users can access and purchase these essential documents, and the standards referenced within them, from the CSA Store.
The NBC, NFC, NPC, and NECB are available free of charge in electronic format through the CSA Store or the NRC Virtual Store. This also includes the Alberta editions of the fire and building codes. Paper copies of the codes and guides are available at a reduced cost. CSA Subscription Collections are also available with codes and referenced documents from CSA Group in one place for easy and convenient access.
The American National Standard for drinking water system components, NSF/ANSI 61, has been updated with Canadian requirements and designated as a National Standard of Canada by the Standards Council of Canada (SCC).
While the standard was only recently designated as a National Standard of Canada, the previously published versions have been widely recognized in Canada for years. Eleven of 13 provinces/territories require drinking water system components to comply with the requirements of NSF/ANSI 61 for either well components or municipal systems. Canadian standards for drinking water components currently reference NSF/ANSI 61.
There is also a proposal, which is expected to be sent out for public comment late in 2019, at the U.S. National Plumbing Code level to require NSF/ANSI/CAN 61 as a potential addition to the 2020 National Plumbing Code. The proposal is being considered because while some product standards referenced in the plumbing code require NSF/ANSI 61, not all do. In addition, not all products installed have product standards in the code. This leaves a gap in the requirements for health effects in the code. Reference to the NSF/ANSI/CAN 61 would close this gap and ensure protection for all drinking water system components.
In most cases, NSF-certified products are still going to be marked with NSFpw or NSF-61. Manufacturers do have the option to change the marking to NSF/ANSI/CAN 61 when used in conjunction with the NSF circular mark. It is anticipated that other certification agencies will also change to the NSF/ANSI/CAN 61 marking.
Forty-eight U.S. states currently have some form of legislation, regulation or policy that requires drinking water system components to comply with, or be certified to, this standard. This is in addition to the 11 Canadian provinces/territories requiring compliance to NSF/ANSI/CAN 61. Certification meets the regulatory requirements for both countries. Certifying to the standard can also fulfill testing requirements in other nations.
NSF/ANSI/CAN 61 sets health effects criteria for many water system components used in centralized water treatment plants and water distribution systems. From gaskets and fittings to potable water storage tanks, the components the standard covers include:
Compliance to NSF/ANSI/CAN 61 applies to any company that manufactures, sells or distributes treatment or distribution products in North America. Certification goes the extra step of verifying that a product meets standard requirements based on audits and tests done by an independent, third-party organization. These listings satisfy the criteria of the National Plumbing Code of Canada and all U.S. model plumbing codes.
This blog explains Canada codes, digging into how they differ from the U.S. and when NFPA applies. We will also offer guidance on the best way to ensure compliance for American companies that cross our northern border.
For more than 80 years, NRC has attempted to harmonize building and safety regulations across Canada by collaborating with its provinces and territories to develop model building, fire, plumbing, and energy codes. The Council of Canadian Fire Marshals and Fire Commissioners also actively participate in developing codes and standards relating to fire safety.
The Canadian Commission on Building and Fire Codes (CCBFC), an independent committee of volunteers established by the NRC, provides direction and oversight of code development. NRC hosts the system and is involved throughout, from managing funding to supporting committee work with the latest technical information and expertise. It also publishes the codes in English and French, which must then be adopted by a regulatory authority to become law.
c80f0f1006