Success at last :)

52 views
Skip to first unread message

Donna

unread,
Oct 15, 2011, 3:12:50 PM10/15/11
to linuxstamp
whewy. I got my wireless modem to work on my board. at least when I
plug it in it comes up with this (see below)

I am not sure about those waring messages, but at least when I go into
the main interface ttyUSB0 with minicom it is responding to AT
commands, so that is HUGE! next step it to get it going with wvdial

Thanks so much for the help.

I am also building a virtual box dedicated to be a cross tool, right
now I am stuck on it is looking for ncurses.h. not sure what to do
next on that one.


sh-3.1# usb 1-1: new full speed USB device using at91_ohci and address
2
usb 1-1: config 1 has an invalid interface number: 6 but max is 5
usb 1-1: config 1 has an invalid interface number: 7 but max is 5
usb 1-1: config 1 has an invalid interface number: 7 but max is 5
usb 1-1: config 1 has no interface number 3
usb 1-1: config 1 has no interface number 5
usb 1-1: configuration #1 chosen from 1 choice
option 1-1:1.0: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1:1.1: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
option 1-1:1.2: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
option 1-1:1.4: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
option 1-1:1.6: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
option 1-1:1.7: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB5
usb 1-1: New USB device found, idVendor=1410, idProduct=b001
usb 1-1: New USB device strings: Mfr=4, Product=3, SerialNumber=5
usb 1-1: Product: Novatel Wireless 4G
usb 1-1: Manufacturer: Novatel Wireless, Inc.
usb 1-1: SerialNumber: 990000466518491
Reply all
Reply to author
Forward
0 new messages