[PATCH 1/3] mtd: m25p80: Pass flags through CAT25_INFO macro

[Sascha Hauer]

The flags may have to be overwritten, so add them to the CAT25_INFO
macro.

Signed-off-by: Sascha Hauer <s.h...@pengutronix.de>
---
drivers/mtd/devices/m25p80.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 35d5851..0b8672b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -703,13 +703,13 @@ struct flash_info {
.flags = (_flags), \
})

-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
((kernel_ulong_t)&(struct flash_info) { \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
.addr_width = (_addr_width), \
- .flags = M25P_NO_ERASE, \
+ .flags = (_flags), \
})

/* NOTE: double check command sets and memory organization when you add
@@ -741,7 +741,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },

/* Everspin */
- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
+ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE) },

/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
@@ -856,11 +856,11 @@ static const struct spi_device_id m25p_ids[] = {
{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },

/* Catalyst / On Semiconductor -- non-JEDEC */
- { "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
- { "cat25c03", CAT25_INFO( 32, 8, 16, 2) },
- { "cat25c09", CAT25_INFO( 128, 8, 32, 2) },
- { "cat25c17", CAT25_INFO( 256, 8, 32, 2) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2) },
+ { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE) },
+ { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE) },
+ { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE) },
+ { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE) },
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
--
1.8.4.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

[Sascha Hauer]

From: Markus Niebel <Markus...@tqs.de>

This adds support for the Everspin mr25h10 MRAM chip to the m25p80
driver.

Signed-off-by: Sascha Hauer <s.h...@pengutronix.de>
---

drivers/mtd/devices/m25p80.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 6f93d32..a48f152 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -743,6 +743,7 @@ static const struct spi_device_id m25p_ids[] = {

/* Everspin */
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, M25P_NO_ERASE | M25P_NO_FR) },

/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },

[Sascha Hauer]

This patch adds a flag to struct flash_info indicating that
fast_read is not supported. This now gives the following logic
when determing whether to enable fastread:

If the flash chip does not support fast_read, then disable it.
Otherwise:
1) enable fast_read if device node contains m25p,fast-read
2) enable fast_read if forced in Kconfig

This makes enabling CONFIG_M25PXX_USE_FAST_READ a safe option
since we no longer enable the fast_read option unconditionally.

For now fast_read is disabled for the everspin mr25h256 and the
catalyst devices. Others may need the flag aswell.

Signed-off-by: Sascha Hauer <s.h...@pengutronix.de>
---

drivers/mtd/devices/m25p80.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 0b8672b..6f93d32 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -691,6 +691,7 @@ struct flash_info {
#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */
#define M25P_NO_ERASE 0x02 /* No erase command needed */
#define SST_WRITE 0x04 /* use SST byte programming */
+#define M25P_NO_FR 0x08 /* Can't do fastread */
};

#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
@@ -741,7 +742,7 @@ static const struct spi_device_id m25p_ids[] = {

{ "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },

/* Everspin */

- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE) },
+ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE | M25P_NO_FR) },

/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },

@@ -856,11 +857,11 @@ static const struct spi_device_id m25p_ids[] = {

{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },

/* Catalyst / On Semiconductor -- non-JEDEC */

- { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE) },
- { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE) },
- { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE) },
- { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE) },
+ { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE | M25P_NO_FR) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE | M25P_NO_FR) },
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
@@ -1044,6 +1045,8 @@ static int m25p_probe(struct spi_device *spi)
#ifdef CONFIG_M25PXX_USE_FAST_READ
flash->fast_read = true;
#endif
+ if (info->flags & M25P_NO_FR)
+ flash->fast_read = false;

/* Default commands */
if (flash->fast_read)