Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

[PATCH] ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects.

1,489 views
Skip to first unread message

Cory Tusar

unread,
Nov 18, 2015, 11:00:11 PM11/18/15
to
Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip
select signals associated with it, while dspi1 has only 4.

Signed-off-by: Cory Tusar <cory....@pid1solutions.com>
---
arch/arm/boot/dts/vfxxx.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 6736bae..1cca43a 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -158,7 +158,7 @@
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
- spi-num-chipselects = <5>;
+ spi-num-chipselects = <6>;
status = "disabled";
};

@@ -170,7 +170,7 @@
interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
- spi-num-chipselects = <5>;
+ spi-num-chipselects = <4>;
status = "disabled";
};

--
2.4.10

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Stefan Agner

unread,
Nov 19, 2015, 1:40:06 AM11/19/15
to
On 2015-11-18 19:54, Cory Tusar wrote:
> Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip
> select signals associated with it, while dspi1 has only 4.

That is right, verified by in my RM!

Acked-by: Stefan Agner <ste...@agner.ch>

>
> Signed-off-by: Cory Tusar <cory....@pid1solutions.com>
> ---
> arch/arm/boot/dts/vfxxx.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 6736bae..1cca43a 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -158,7 +158,7 @@
> interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks VF610_CLK_DSPI0>;
> clock-names = "dspi";
> - spi-num-chipselects = <5>;
> + spi-num-chipselects = <6>;
> status = "disabled";
> };
>
> @@ -170,7 +170,7 @@
> interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clks VF610_CLK_DSPI1>;
> clock-names = "dspi";
> - spi-num-chipselects = <5>;
> + spi-num-chipselects = <4>;
> status = "disabled";
> };
--

Shawn Guo

unread,
Nov 24, 2015, 4:50:08 AM11/24/15
to
On Wed, Nov 18, 2015 at 10:54:39PM -0500, Cory Tusar wrote:
> Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip
> select signals associated with it, while dspi1 has only 4.
>
> Signed-off-by: Cory Tusar <cory....@pid1solutions.com>

Applied, thanks.
0 new messages