Re: Where Linux 802.11x support needs work

[Mark Watts]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> o Firmware issues
> 1) Cisco aironet firmware upload is quite inconsistent, fails with
> 5.21 for example. Firmware <= 5.02 seems to be required for using
> WEP with most access points. Latest Cisco-provided driver is quite
> different than latest in-kernel driver

This might explain why I've never managed to get WEP working with my cisco
cards...

Is there some documentation somewhere on exactly what firmware/driver/kernel
versions you need to make WEP work with aironet cards?

Cheers,

Mark.

- --
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFB+mpwBn4EFUVUIO0RAg+qAKDP9f3uV0YQfN/kj/Wp04NHtoTNJgCggun1
IhMCNDTQ2sIPollnKE3SXNk=
=pKy+
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

[Dan Williams]

On Fri, 2005-01-28 at 16:38 +0000, Mark Watts wrote:
> > o Firmware issues
> > 1) Cisco aironet firmware upload is quite inconsistent, fails with
> > 5.21 for example. Firmware <= 5.02 seems to be required for using
> > WEP with most access points. Latest Cisco-provided driver is quite
> > different than latest in-kernel driver
>
> This might explain why I've never managed to get WEP working with my cisco
> cards...
>
> Is there some documentation somewhere on exactly what firmware/driver/kernel
> versions you need to make WEP work with aironet cards?

Nope. Cisco-provided drivers (for 2.4-series kernels only) require a
firmware version of 5.30.17. The in-kernel drivers for the 2.6 series
don't have the updates necessary to work with that version, and it
appears that versions of the firmware that are higher than 5.20.x will
not work for WEP using the in-kernel drivers.

I have personally tried 5.41 and 5.30.17 on a PCMCIA card and found they
do _not_ work with WEP. I have also tried versions 5.00.01, 5.02.13,
5.00.03, and 5.20.07 (?) on both PCMCIA and MiniPCI cards and found them
to work correctly with WEP-enabled access points.

Dan