* Mathieu Desnoyers (mathieu....@efficios.com) wrote:
> __module_ref_addr() should use per_cpu_ptr() to obfuscate the pointer
> (RELOC_HIDE is needed for per cpu pointers).
>
> This non-standard per-cpu pointer use has been introduced by commit
> 720eba31f47aeade8ec130ca7f4353223c49170f
>
> It causes a NULL pointer exception on some configurations when CONFIG_TRACING is
> enabled on 2.6.33. This patch fixes the problem (acknowledged by Randy who
> reported the bug).
>
> It did not appear to hurt previously because most of the accesses were done
> through local_inc, which probably obfuscated the access enough that no compiler
> optimizations were done. But with local_read() done when CONFIG_TRACING is
> active, this becomes a problem. Non-CONFIG_TRACING is probably affected as well
> (module.c contains local_set and local_read that use __module_ref_addr()), but I
> guess nobody noticed because we've been lucky enough that the compiler did not
> generate the inappropriate optimization pattern there.
>
> This patch should be queued for the 2.6.29.x through 2.6.33.x stable branches.
> (tested on 2.6.33.1 x86_64)
>
> The __module_ref_addr() problem disappears in 2.6.34-rc kernels because these
> percpu accesses were re-factored.
>
> It makes me wonder about other non-standard uses of per_cpu_offset: there is one
> in module.c and two in lockdep.c, which are still in 2.6.34-rc. This should
> probably be fixed by the code authors in separate patches.
>
> lockdep.c: commit 8e18257d29238311e82085152741f0c3aa18b74d
> module.c: commit 6b588c18f8dacfa6d7957c33c5ff832096e752d3
>
> Signed-off-by: Mathieu Desnoyers <mathieu....@efficios.com>
> Tested-by: Randy Dunlap <randy....@oracle.com>
> CC: Eric Dumazet <da...@cosmosbay.com>
> CC: Rusty Russell <ru...@rustcorp.com.au>
> CC: Peter Zijlstra <a.p.zi...@chello.nl>
> CC: Tejun Heo <t...@kernel.org>
> CC: Ingo Molnar <mi...@elte.hu>
> CC: Andrew Morton <ak...@linux-foundation.org>
> CC: Linus Torvalds <torv...@linux-foundation.org>
> CC: Greg Kroah-Hartman <gre...@suse.de>
> ---
> include/linux/module.h | 2 +-
> kernel/module.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> Index: linux-2.6-lttng/include/linux/module.h
> ===================================================================
> --- linux-2.6-lttng.orig/include/linux/module.h 2010-03-25 11:01:53.000000000 -0400
> +++ linux-2.6-lttng/include/linux/module.h 2010-03-25 11:01:59.000000000 -0400
> @@ -467,7 +467,7 @@ void symbol_put_addr(void *addr);
> static inline local_t *__module_ref_addr(struct module *mod, int cpu)
> {
> #ifdef CONFIG_SMP
> - return (local_t *) (mod->refptr + per_cpu_offset(cpu));
> + return (local_t *) per_cpu_ptr(mod->refptr, cpu);
> #else
> return &mod->ref;
> #endif
>
> --
> Mathieu Desnoyers
> Operating System Efficiency R&D Consultant
> EfficiOS Inc.
> http://www.efficios.com
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
CC: Steven Rostedt <ros...@goodmis.org>
---
include/linux/module.h | 2 +-
kernel/module.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
Index: linux-2.6-lttng/include/linux/module.h
===================================================================
--- linux-2.6-lttng.orig/include/linux/module.h 2010-03-25 11:01:53.000000000 -0400
+++ linux-2.6-lttng/include/linux/module.h 2010-03-25 11:01:59.000000000 -0400
@@ -467,7 +467,7 @@ void symbol_put_addr(void *addr);
static inline local_t *__module_ref_addr(struct module *mod, int cpu)
{
#ifdef CONFIG_SMP
- return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+ return (local_t *) per_cpu_ptr(mod->refptr, cpu);
#else
return &mod->ref;
#endif
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
--
-- Steve
--
Yes. 2.6.34-rc does not have this issue anymore, but the patch is needed in
-stable.
Thanks,
Mathieu
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
Why is this not in .34-rc2? Can you find the specific patch in Linus's
tree that solves this and let sta...@kernel.org know about it?
thanks,
greg k-h
Looks like it was this commit:
commit e1783a240f491fb233f04edc042e16b18a7a79ba
Author: Christoph Lameter <c...@linux-foundation.org>
Date: Tue Jan 5 15:34:50 2010 +0900
module: Use this_cpu_xx to dynamically allocate counters
Mathieu's fix was:
- return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+ return (local_t *) per_cpu_ptr(mod->refptr, cpu);
As Mathieu states in his change log, the bug is that the mod->refptr is
outside the assembly obfuscation of the per_cpu_offset(). This allows
the compiler to optimize and cause a NULL pointer dereference with the
manipulation of per cpu data.
Christoph Lameter's change fixes this bug as a side effect:
-static inline local_t *__module_ref_addr(struct module *mod, int cpu)
-{
-#ifdef CONFIG_SMP
- return (local_t *) (mod->refptr + per_cpu_offset(cpu));
-#else
- return &mod->ref;
-#endif
-}
-
/* Sometimes we know we already have a refcount, and it's easier not
to handle the error case (which only happens with rmmod --wait). */
static inline void __module_get(struct module *module)
{
if (module) {
- unsigned int cpu = get_cpu();
- local_inc(__module_ref_addr(module, cpu));
+ preempt_disable();
+ __this_cpu_inc(module->refptr->count);
trace_module_get(module, _THIS_IP_,
- local_read(__module_ref_addr(module, cpu)));
- put_cpu();
+ __this_cpu_read(module->refptr->count));
+ preempt_enable();
}
}
By removing the buggy code all together.
-- Steve
On 03/30/2010 06:07 AM, Greg KH wrote:
>> Yes. 2.6.34-rc does not have this issue anymore, but the patch is needed in
>> -stable.
>
> Why is this not in .34-rc2? Can you find the specific patch in Linus's
> tree that solves this and let sta...@kernel.org know about it?
For 2.6.34, the following two patches should remove the problem.
They're not in mainline yet but should appear in linux-next soon and
after a few days, I'll push them to Linus.
http://thread.gmane.org/gmane.linux.kernel/958794/focus=959493
Thanks.
--
tejun
Exactly. Steven has beaten me on the start line on this one. ;)
Thanks,
Mathieu
>
> -- Steve
>
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
Oh, Steven is right. The ones which are removed by the above patch
are different ones. That said, it might be a good idea to apply fixes
for them to -stable too. Mathieu, are you interested in submitting
similar -stable fixes for kernel/module.c::percpu_modcopy() and
lockdep.c::static_obj()?
Sure, will do. I'm doing a bit of testing and I'll post these patches shortly.
Thanks,
Mathieu
>
> Thanks.
>
> --
> tejun
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
Ok, I'm totally confused now :(
What patch should I apply to a stable release, and which stable release?
thanks,
greg k-h
Unless you take all the per cpu refactoring from 2.6.34-rc, the following patch
should be taken into -stable. Please see the changelog for the list of stable
releases that need it.
module: fix __module_ref_addr()
__module_ref_addr() should use per_cpu_ptr() to obfuscate the pointer
(RELOC_HIDE is needed for per cpu pointers).
This non-standard per-cpu pointer use has been introduced by commit
720eba31f47aeade8ec130ca7f4353223c49170f
It causes a NULL pointer exception on some configurations when CONFIG_TRACING is
enabled on 2.6.33. This patch fixes the problem (acknowledged by Randy who
reported the bug).
It did not appear to hurt previously because most of the accesses were done
through local_inc, which probably obfuscated the access enough that no compiler
optimizations were done. But with local_read() done when CONFIG_TRACING is
active, this becomes a problem. Non-CONFIG_TRACING is probably affected as well
(module.c contains local_set and local_read that use __module_ref_addr()), but I
guess nobody noticed because we've been lucky enough that the compiler did not
generate the inappropriate optimization pattern there.
This patch should be queued for the 2.6.29.x through 2.6.33.x stable branches.
(tested on 2.6.33.1 x86_64)
The __module_ref_addr() problem disappears in 2.6.34-rc kernels because these
percpu accesses were re-factored.
Signed-off-by: Mathieu Desnoyers <mathieu....@efficios.com>
Tested-by: Randy Dunlap <randy....@oracle.com>
CC: Eric Dumazet <da...@cosmosbay.com>
CC: Rusty Russell <ru...@rustcorp.com.au>
CC: Peter Zijlstra <a.p.zi...@chello.nl>
CC: Tejun Heo <t...@kernel.org>
CC: Ingo Molnar <mi...@elte.hu>
CC: Andrew Morton <ak...@linux-foundation.org>
CC: Linus Torvalds <torv...@linux-foundation.org>
CC: Greg Kroah-Hartman <gre...@suse.de>
CC: Steven Rostedt <ros...@goodmis.org>
---
include/linux/module.h | 2 +-
kernel/module.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
Index: linux-2.6-lttng/include/linux/module.h
===================================================================
--- linux-2.6-lttng.orig/include/linux/module.h 2010-03-25 11:01:53.000000000 -0400
+++ linux-2.6-lttng/include/linux/module.h 2010-03-25 11:01:59.000000000 -0400
@@ -467,7 +467,7 @@ void symbol_put_addr(void *addr);
static inline local_t *__module_ref_addr(struct module *mod, int cpu)
{
#ifdef CONFIG_SMP
- return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+ return (local_t *) per_cpu_ptr(mod->refptr, cpu);
#else
return &mod->ref;
#endif
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com